Briteq BT-THEATRE 400TW User manual

ENGLISH OPERATION MANUAL V1.1
BRITEQ®1/13 BT-THEATRE 400TW
OPERATION MANUAL
Thank you for buying this Briteq®product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
•Powerful 400W LED theater Fresnel with adjustable CCT.
•Dual LED (200W 2800K + 200W 6000K) for tunable white with CCT ranging from 2800K to 6000K !
•The perfect all-round projector for TV-work, theatre, rental, exhibition booths!
•Exceptional photometric / price performance: CRI/Ra> 96, TLCI >98, CQS >96, Rf >94, Rg >100 (@3000K)
•DMX-controlled, motorized beam angle adjustment: 11° ~ 56° (field angle: 20° ~ 67°)
•Manual CCT presets while used in standalone: 2800K, 3000K, 3200K, 4000K, 4300K, 5600K, 6000K
•Color frame for use of color filters and eight-leaf barndoor included
•No more heavy and expensive dimmer packs needed!
•Very silent operation: temperature controlled, low noise cooling fan.
•LCD-display to navigate easily through the setup menu!
•Manual or DMX-controlled: 6 different channel modes (8bit & 16bit dimming) for maximum flexibility.
•Can be used 1 channel DMX mode, with CCT-preset of your choice.
•Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq®code: 4645)
•Flicker free TV-recordings thanks to adjustable LED refresh rate: 600 Hz to 4800 Hz!
•Manual dimming & zoom/focus control: easy projector alignment on the stage + use on exhibition booths.
•Selectable lamp behavior: halogen lamp (slow) or led (fast)
•Four dimmer curves: linear, square, inverse square, S-curve
•In case of DMX failure, you can choose between manual, blackout and freeze mode.
•RDM-functionality for easy remote setup & monitoring: DMX addressing, channel mode, temperature, …
•Lock function to avoid unwanted altering of the settings.
•Default factory settings + user settings can be saved/loaded.
•3 & 5pin DMX in/outputs + PowerCON®compatible in/outputs for easy daisy chaining.
BEFORE USE
•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for
the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by
mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or
problems caused by disregarding this user manual.
•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check the contents:
Check that the carton contains the following items:
•English operating instructions, other languages can be downloaded from our website.
•BT-THEATRE 400TW
•Eight-leaf barndoor
•Color frame
•PowerCon®mains cable

ENGLISH OPERATION MANUAL V1.1
BRITEQ®2/13 BT-THEATRE 400TW
SAFETY INSTRUCTIONS:
•To protect the environment, please try to recycle the packing material as much as possible.
•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•This unit is for indoor use only.
•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
•Don’t cover any ventilation openings as this may result in overheating.
•Prevent use in dusty environments and clean the unit regularly.
•Keep the unit away from children.
•Inexperienced persons should not operate this device.
•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and
servicing.
•Allow the device about 10 minutes to cool down before to start servicing.
•Always unplug the unit when it is not used for a longer time or before to start servicing.
•The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•Check that the available voltage is not higher than the one stated on the unit.
•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•Never let the power-cord come into contact with other cables!
•This fixture must be earthed in order to comply with safety regulations.
•Don’t connect the unit to any dimmer pack.
•Always use an appropriate and certified safety cable when installing the unit.
•In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type
and electrical specifications!
•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
•The housing and the lenses must be replaced if they are visibly damaged.
•Please use the original packing when the device is to be transported.
•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
CAUTION: To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 1 meters
CAUTION: Do not stare at operating lamp.
May be harmful to the eyes.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®3/13 BT-THEATRE 400TW
DESCRIPTION:
1. MAINS INPUT: equipped with PowerCON®compatible connectors. Connect the supplied mains cable or
any PowerCon® extension cable here.
2. MAINS OUTPUT: used to daisy chain the power to several other projectors. Always pay attention to the
maximum load while adding projectors! Special Multi cables (PowerCON® + DMX XLR-cables are optionally
available: see our website!)
3. MAINS FUSE: protects the unit in case of electrical problems, always use the prescribed fuse!
4. DMX IN/OUT: both 3pin and 5pin in/outputs are available to daisy chain the projector with other units that
will be controlled by a DMX-controller.
5. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect
the unit to a PC! Instead, this USB-connector makes it very easy to add wireless DMX to the
unit! Just add the (optional) WTR-DMX DONGLE from BRITEQ®and you will get wireless
DMX! Moreover, you will be able to connect other DMX-controlled equipment to the DMX-
output so you can share the wireless DMX function with all connected units! No extra settings
to be made in the setup menu, just follow the procedure in the user manual supplied with the
WTR-DMX DONGLE from BRITEQ®. The separate WTR-DMX DONGLE is available from
WWW.BRITEQ-LIGHTING.COM (order code: 4645)
6. DISPLAY: shows the various menus and the selected functions:
7. MENU-button: used to enter and exit the setup menu or to jump to a higher level in the setup menu.
8. ENTER-button: used to select a menu option or confirm a setting.
9. ▲-button: used to go to the previous menu option or to increase a parameter value.
10.▼-button: used to go to the next menu option or to decrease a parameter value.
11.SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”.
12.DIMMER KNOB: While working in manual mode, this knob is used to adjust the dimmer level.
•PRESS 1x SHORTLY: you can set the dimmer level in bigger steps.
•PRESS 2x SHORTLY: you
can set the dimmer level in
small steps.
•PRESS 2 seconds: the
current dimmer level is saved
to the internal memory. (is used next time the projector is switched on)
13.FOCUS / CCT KNOB: While working in manual mode, this knob is used to adjust the beam angle and color
temperature (CCT) of the light.
•PRESS 1x SHORTLY: you
can set the beam angle in 1%
steps.
•PRESS 2x SHORTLY: you
can select the different CCT-presets.
•PRESS 2 seconds: the current beam angle & CCT is saved to the internal memory. (is used next time
the projector is switched on)
TIP: In 1CH mode this knob is a shortcut to adjust CCT & beam angle presets in the setup menu.
In 2CH mode this knob is a shortcut to adjust the beam angle preset in the setup menu.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®4/13 BT-THEATRE 400TW
14.HANGING BRACKET: with a knob on both sides to fasten the unit in the desired
position. You can use the hole in the center of the bracket to fix a hook or truss clamp.
NOTE: for easy and fast alignment of the projectors the standard hanging
bracket can be replaced by the optionally available pole yoke.
(BT-THEATRE YOKE ~ order code: 6021).
15.LOCKING CLIP: The clip is used to keep the barndoor and color frame in place.
Press the clip aside to open it.
16.BARN DOORS: they facilitate shaping of the beam of light from the fixture, and
prevent the distinctive scatter of light created by the Fresnel lens from spilling into
areas where it is not wanted, such as the eyes of audience members. Just rotate the
barndoor leafs in the desired position.
OVERHEAD RIGGING
Important: The installation must be carried out by qualified service personal only. Improper installation
can result in serious injuries and/or damage to property. Overhead rigging requires extensive
experience! Working load limits should be respected, certified installation materials should be used,
the installed device should be inspected regularly for safety.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Locate the fixture in a well-ventilated spot, far away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
•The device should be installed out of reach of people and outside areas where persons
may walk by or be seated.
•Before rigging make sure that the installation area can hold a minimum point load of
10times the device’s weight.
•Always use a certified safety cable that can hold 12times the weight of the device when
installing the unit. This secondary safety attachment should be installed in a way that no
part of the installation can drop more than 20cm if the main attachment fails.
•The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•Don’t cover any ventilation openings as this may result in overheating.
•The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
SETUP MENU / HOW TO SETUP
With the setup menu you can fully configure the projector. All settings are preserved when the unit is
disconnected from the mains.
General instructions for setup.
The SETUP-menu has three logically structured levels, see the menu structure.
•Press the MENU button to enter the SETUP-menu.
•Press the ▲/▼ buttons to browse the different functions of the setup menu until the required function is
shown on the display.
•Press the ENTER button to access the function and change its parameters.
•Use ▲/▼ buttons to change the value.
•Press the ENTER button again confirm.
•To jump to a higher menu level: press the MENU button.
•To exit the SETUP-menu: press the MENU button several times until the standard display is shown.
Remark: to make things easier you will always enter the SETUP-menu at the last used location.
DMX-Address
Used to set the desired DMX-address. (on RDM-compatible controllers this option can be set remotely)
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select the desired DMX512 address. The last occupied DMX-address is also shown:
makes it easier to set the address of the next unit in the chain.
•Once the correct address shows on the display, press the ENTER button to confirm.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®5/13 BT-THEATRE 400TW
CHANNEL Mode
Used to set the desired channel mode. (on RDM-compatible controllers this option can be set remotely)
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:
•[1CH DIM 8bit] : 1 channel mode (8bit dimmer, CCT selected in the setup menu)
•[2CH DIM+CCT 8bit] : 2 channel mode (8bit dimmer + CCT channel)
•[3CH D+CCT+F 8b] : 3 channel mode (16bit dimmer + CCT channel).
•[4CH D+CCT+F 16b] : 4 channel mode (16bit dimmer + CCT channel + Focus)
•[5CH D+CCT+F+S] : 5 channel mode (16bit dimmer + CCT channel + Focus + Strobe)
•[6CH FULL 16bit] : 6 channel mode (16bit dimmer + CCT channel + Focus + Strobe + function )
•Once the correct option shows on the display, press the ENTER button to confirm.
LEVEL 1
LEVEL 2
DMX-Address
001 - XXX
CHANNEL
Mode
1CH DIM 8bit
2CH DIM+CCT 8bit
3CH D+CCT+F 8b
4CH D+CCT+F 16b
5CH D+CCT+F+S
6CH FULL 16bit
FIXTURE Set
NO DMX Mode
Freeze
Blackout
Manual
DIM Curve
Linear
Square
Inv. Square
S-Curve
Dimmer Speed
000 –255 (0-2000ms)
CCT preset
2800K → 6000K
PWM frequency
0.6 → 4.8 kHz
FOCUS PRESET
000 - 255
FAN Set
Auto High Low
DISPLAY Set
Backlight
ON, 01-60M
AUTO LOCK
ON / OFF
noDMX blink
ON / OFF
Temp C/F
Celcius/Fahrenheit
DEFAULTS
Factory Settings
LOAD ?
USER Settings
LOAD / SAVE ?
INFORMATION
Total LED Hours
xxxx Hrs
Last JOB hours
xxxx Hrs
LED Temp.
xxx °C / F
ERROR info
xxxxxxxx
Model Name
BT-THEATRE 400TW
Firmware V.
V x.xx
RDM UID
0x21220044xxxx
FIXTURE Set –
Used to configure different parameters if the projector.
NO DMX Mode
Used to set how the projector reacts when the DMX-signal disappears.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:

ENGLISH OPERATION MANUAL V1.1
BRITEQ®6/13 BT-THEATRE 400TW
•BLACKOUT: output turns black while no DMX is detected.
•FREEZE: output based on the last valid DMX-signal is kept on the projector.
•MANUAL: output and focus are set manually while no DMX is detected. Settings are preserved.
•Once the correct option shows on the display, press the ENTER button to confirm.
Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.
DIM Curve
Used to set the dimmer curve of the master dimmer.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to selected the desired curve:
•Once you have the desired curve, press the ENTER button to save it.
Dimmer Speed
Used to set the speed (smoothness) of the dimmer continuously.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select the desired speed:
•000 (0ms): The projector follows the instructions instantly, no delay (also called LED behavior).
…
•255 (2000ms): The projector imitates the behavior of a halogen lamp (slower reaction time).
•Once the desired value shows on the display, press the ENTER button to confirm.
Remark: The default value (100 or 440ms) is the most realistic value to imitate “halogen lamp” behavior. At
the same time the light output will be instantaneous while pushing a flash button on your DMX-controller.
CCT Preset
Used to set the standard LED CCT (color temperature) while used in a mode that has no CCT-setting.
•Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER].
•Use ▲/▼ buttons to select the desired CCT:
•2800K warm white, comparable to halogen lamps: theatre applications, …
•3000K warm white, comparable to halogen lamps: theatre applications, …
•3200K warm white, comparable to halogen lamps: theatre applications, …
•4000K natural white, comparable to metal halide lamps: exhibition stands, shops, …
•4300K natural white, comparable to fluorescent lamps: exhibition stands, shops, …
•5600K Daylight white: TV-recordings, exhibition stands, shops, …
•6000K Cool white: TV-recordings, exhibition stands, jewelry shops, …
•Press the [ENTER] button to save the setting.
Note: in several DMX-modes you can use the CCT-channel to select any CCT between 2800K and 6000K.
PWM Frequency
Used to set the PWM frequency of the LED dimming.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select the desired speed:
•900 Hz : slowest PWM frequency.
…
•20’000 Hz: highest possible PWM frequency,
•Once the desired value shows on the display, press the ENTER button to confirm.
Remark: The default value (1’200 Hz) gives excellent dimming performance with very low dimmer noises.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®7/13 BT-THEATRE 400TW
FOCUS Preset
Used to set the standard beam angle when a DMX-mode without focus control is selected.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•The light output is set to maximum while the current focus value is shown on the display.
•Use ▲/▼ buttons to select the desired focus preset between 000 (narrow beam) and 255 (wide beam).
•Once the correct option shows on the display, press the ENTER button to confirm.
FAN Set
On some occasions fan noise should be reduced to a minimum. Therefore you can set three different
fan speed modes.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•Auto: the fan speed will be automatically adjusted to always have the best balance between fan noise
and performance (light output). This is the best setting for use in theatres, conference rooms, …
•Low:the fan speed will always be low to reduce fan noise to a minimum. However this means that the
LED temperature could become too high: in that case the LED current will be reduced automatically to
protect the LED. Light output will also be lower.
•High: the LED will be well cooled so maximum light output can be guaranteed under all conditions.
However this means that fan noise will be higher than usual.
•Press the ENTER button to confirm.
DISPLAY Set –
This level contains all display related settings.
Backlight
Used to adjust how long the display stays lit after the last time it was used.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•ON: display is always lit.
•0xxM: you can set the number of minutes before the display turns dark after it was last used.
•Press the ENTER button to confirm.
AUTO LOCK
Used to lock the setup menu against unwanted altering of the settings.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•OFF: The setup menu can be used at any time.
•ON: After +/-60s the setup menu locks automatically, the display shows “ LOCKED ***** ”.
Unlock the display by pressing the buttons in this order: UP, DOWN, UP, DOWN, ENTER.
noDMX blink
Used to select of the display should blink or not when the DMX signal was lost.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to toggle between ON and OFF.
•Press the ENTER button to confirm.
Temp C/F
Used to select if the LED-temperature is shown in degrees Celcius °C or Fahrenheit F.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•Celcius: LED-temperature is shown in degrees Celcius °C.
•Fahrenheit: LED-temperature is shown in degrees Fahrenheit F.
•Press the ENTER button to confirm.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®8/13 BT-THEATRE 400TW
DEFAULTS –
This is your emergency exit if you really messed up the settings: just return to the Factory Settings
(Factory Settings). Also a user setting can be saved/loaded.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•Factory Settings: standard factory settings.
•USER Def.: you can adapt the factory settings and save the new parameters as your personal USER-
settings.
•Press the ENTER button:
•Factory Settings was selected: the display shows “LOAD”
•Press the ENTER button and use ▲/▼ buttons to confirm YES / NO
•Press the ENTER button to confirm.
•USER Def. was selected: the display shows “LOAD”
•Use ◄/► buttons to select LOAD / SAVE
•Press the ENTER button and use ▲/▼ buttons to confirm YES / NO
•Press the ENTER button to confirm.
•SAVE was selected: the current settings of the setup menu are saved to memory.
•LOAD was selected: the previously saved settings are loaded.
Set of Factory default settings:
PARAMETER name
FACTORY defaults
USER defaults
CHANNEL mode
3CH D+CCT+F 8bit
Current setting in the menu
NO DMX mode
Freeze
Current setting in the menu
DIM Curve
Square
Current setting in the menu
Dimmer Speed
100 (440ms)
Current setting in the menu
PWM Frequency
1’200 Hz
Current setting in the menu
FOCUS PRESET
200
Current setting in the menu
FAN Set
Auto
Current setting in the menu
Backlight
1 min.
Current setting in the menu
AUTO LOCK Menu
OFF
Current setting in the menu
no DMX blink display
OFF
Current setting in the menu
Temp C/F
Celcius
Current setting in the menu
INFORMATION
Timers ( Total LED hours + Last JOB)
Shows how long the projector was used.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the values can be changed
•Use ▲/▼ buttons to select one of these options:
•Total LED hours: The total time the LED was used since it was used for the 1st time, non-resettable.
•Last JOB: The time the unit was used on the last job.
This timer can be reset by pressing the ▲/▼ buttons for about 5 seconds.
•Press the ENTER button to confirm.
LED Temp.
Shows the actual temperature of the LEDs.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the LED temperature is shown.
ERROR info
Shows information about eventual errors.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button:
•No errors: display shows NONE
•Errors to report: the error will be shown on the display so you can take action.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®9/13 BT-THEATRE 400TW
Model Name
Shows the name of the projector.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the display shows the name of the unit.
Firmware V.
Shows the current firmware version in the projector.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the display shows the firmware version.
Note: The firmware of this unit can be upgraded using our special “Firmware Updater 2” (separately available
from Briteq). More information about this can be found in the user manual of the firmware updater or our
website: https://briteq-lighting.com/firmware-updater-2
RDM UID
Shows the unique RDM identification code of the projector.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the ENTER button: the display shows the UID of the unit.
OTHER SETUP FUNCTIONS
FOCUS RESET
There are 2 ways to activate the FOCUS RESET function:
•MANUAL RESET: press the DIM + FOCUS/CCT KNOB for more than 5 seconds to open a hidden menu.
The display shows FOCUS RESET: press the ENTER button to start the reset.
•REMOTE RESET: you can activate the FOCUS RESET by DMX:
•3CH D+CCT+F 8bit DMX-Mode selected:
Remote “Focus reset” will be activated when the following DMX-values are received during 5seconds:
CH1 = 001 * CH2 = 002 * CH3 = 003.
•4CH D+CCT+F 16bit or 5CH D+CCT+F+S DMX-Mode selected:
Remote “Focus reset” will be activated when the following DMX-values are received during 5seconds:
CH1 = 001 * CH3 = 002 * CH4 = 003.
•6CH FULL 16bit DMX-Mode selected:
Remote “Focus reset” will be activated when the FUNCTION channel is set to 241→243 during
3seconds.
FOCUS CALIBRATION
Press the DIM + FOCUS/CCT KNOB together for more than 5 seconds to open a hidden menu.
•The display shows FOCUS RESET
•Press the ▲/▼ buttons until the display shows: CALIBRATE FOCUS
•Press the ENTER button to activate: the light output will be set to maximum.
•Use ▲/▼ buttons to adjust the calibration of the Focus.
•Press the ENTER button to confirm.
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Electrical installation for two or more units in DMX-mode:
•The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected units.
•Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)
•To prevent strange behavior of the light effects, due to interferences, you must use a
90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this simply
won’t work!
•Make sure that all units are connected to the mains.
•Each unit in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®10/13 BT-THEATRE 400TW
RDM FUNCTIONS / REMOTE SETUP
RDM means “Remote Device Management”. This projector works with a brief set of RDM-functions which
means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of
these functions are briefly explained below, others will be added in the future.
•The DMX-controller sends out a “discovery command”, all RDM devices respond and send their unique
device ID.
•The DMX-controller asks each RDM device for some basic data so it knows which devices are connected.
The projector will respond:
•Device name: BT-THEATRE 400TW
•Manufacturer: Briteq®
•Category: LED Dimmer
•Firmware: x.x.x.x (firmware version of the projector)
•DMX address: xxx (current DMX start address of the projector)
•DMX footprint: xx (number of DMX-channels used by the projector)
•Personality: xx (current personality or DMX-working mode used by the projectors)
•The DMX-controller can send certain commands to each RDM device which allow remote setup of the units.
Thanks to this the projector can be setup remotely.
The following functions can be managed remotely:
No more need to take a ladder and set all units one by one!
•DMX START ADDRESS: The start address can be set remotely from 001 to xxx.
•PERSONALITY: The DMX working mode (DMX-chart) can be set remotely.
These 2 functions make it possible to prepare a complete DMX-patch of all projectors on the DMX-controller
and send these data to all projectors at once. More functions will be added later.
OPERATING INSTRUCTIONS
Note: when the projector is switched on the display shows “UPDATE WAIT …” This message informs you that
IF you want to upgrade the firmware, you should do it while this message is shown on the display. For normal
use you can ignore this message completely.
A. Standalone 1unit –Manual operation:
•Just connect the projector to the mains.
•In the setup menu the option NO DMX Mode should be set to MANUAL
•Adjust the DIMMER and FOCUS/CCT knobs
•Refer to points 12 + 13 in chapter DESCRIPTION for more information.
B. Controlled by universal DMX-controller:
•Connect all units together. Refer to the chapter “Electrical installation for two or more units in DMX-
mode” to learn how to do this (don’t forget to address all units properly!)
•Connect all units to the mains and turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
can use a different number DMX-channels, depending on the DMX-mode you have selected in the menu.
See the different DMX charts:

ENGLISH OPERATION MANUAL V1.1
BRITEQ®11/13 BT-THEATRE 400TW
1CH
2CH
3CH
4CH
5CH
6CH
VALUES
FUNCTION
REMARKS
1
1
1
1
1
1
000-255
Dimmer coarse (0-100%)
2
2
2
000-255
Dimmer fine (16bit)
2
2
3
3
3
000-255
Increasing CCT
4
4
000-005
Open (no strobe)
006-125
Normal strobe (slow → fast)
126-135
Open (no strobe)
136-255
Random strobe (slow → fast)
3
4
5
5
000-255
Focus / Zoom
Small → large beam
6
000-020
No function
FUNCTION CHANNEL
021-025
Dim curve: Linear
Delay 3s
026-030
Dim curve: Square
Delay 3s
031-035
Dim curve: Inverse Square
Delay 3s
036-040
Dim curve: S-Curve
Delay 3s
041-060
No function
061-065
Dim behavior: LED
Delay 3s
066-070
Dim behavior: DIMMER SPEED
Delay 3s
071-090
No function
091-095
No DMX: Freeze mode
Delay 3s
096-100
No DMX: blackout mode
Delay 3s
101-105
No DMX: Manual mode
Delay 3s
106-125
No function
126-130
Display: BLINK ON
Delay 3s
131-135
Display: BLINK OFF
Delay 3s
136-155
No function
156-160
FAN: SILENT mode
Delay 3s
161-165
FAN: AUTO mode
Delay 3s
166-170
FAN: HIGH mode
Delay 3s
171-190
No function
191-195
PWM = 0.6kHz
Delay 3s
196-200
PWM = 1.2kHz
Delay 3s
201-205
PWM = 1.8kHz
Delay 3s
206-210
PWM = 2.4kHz
Delay 3s
211-215
PWM = 3.0kHz
Delay 3s
216-220
PWM = 3.6kHz
Delay 3s
221-225
PWM = 4.2kHz
Delay 3s
226-230
PWM = 4.8kHz
Delay 3s
231-240
No function
241-243
FOCUS RESET
Delay 3s
244-255
No function
Remark 1: 1CH and 2CH modes have no FOCUS channel: FOCUS is adjusted in the setup menu.
Remark 2: in the function channel you can choose "DIM behavior = DIMMER SPEED". The dimmer speed
value is set using the setup menu.

ENGLISH OPERATION MANUAL V1.1
BRITEQ®12/13 BT-THEATRE 400TW
MAINTENANCE
•Make sure the area below the installation place is free from unwanted persons during servicing.
•Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
•All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected.
•In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
•Clean with a soft cloth using normal glass cleaning products.
•Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Mains Input: AC 110 - 240V, 50/60Hz
Power consumption: 226 Watts maximum
Power connections: PowerCon compatible input / output
DMX connections: 3&5 pin-XLR male / female inputs + outputs
Lamp: CW/WW LED 400W (WW 200W + CW 200W)
CRI-factor: >97
Beam Angle: electronic zoom 11°→56°
IP-Rating: IP20
Size: See drawing
Weight: 9 kg

ENGLISH OPERATION MANUAL V1.1
BRITEQ®13/13 BT-THEATRE 400TW
Photometric data
Lux charts
The information might be modified without prior notice
You can download the latest version of this user manual on our website: www.briteq-lighting.com

WWW.BRITEQ-LIGHTING.COM
Copyright © 2023 by BEGLEC NV
‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
MAILING LIST
EN: Subscribe today to our mailing list for the latest product news!
FR: Inscrivez-vous à notre liste de distribution si vous souhaitez suivre l'actualité de nos produits!
NL: Abonneer je vandaag nog op onze mailinglijst en ontvang ons laatste product nieuws!
DE: Abonnieren Sie unseren Newsletter und erhalten Sie aktuelle Produktinformationen!
ES: Suscríbete hoy a nuestra lista de correo para recibir las últimas noticias!
PT: Inscreva-se hoje na nossa mailing list para estar a par das últimas notícias!