BRK electronic DS700RF User manual

Save time & money on your installation projects
RF INTERLINK
BASE
MODEL: DS700RF
VISIT US ONLINE
www.brk.co.uk
CONTACT
[phone]
A Sprue Safety Products Brand

The “RF base” is a system that provides a
wireless interlink between mains powered smoke
and heat alarms; it is quick to install and quick to
link, ensuring greater output and savings.
The base unit has been designed to transmit a
Radio Frequency (RF) signal, when the alarm
attached to it senses smoke or fire. When another
RF base receives this signal the attached smoke
or heat alarm will also sound, eliminating the need
for connection wires between each alarm. This
is also a particularly useful system to use when
refurbishing or extending an existing property.
“Eliminates the need to run
long interconnecting wires
around a building”
SAVE TIME AND MONEY
ON YOUR PROJECTS…
“Minimum disruption during
the installation process”
“RF technology is an
installer’s dream...”
No extra wires.....
No mess..............
No fuss................
PROTECTION WHEN YOU
NEED IT...
cables and
electrical
trunking to
worry about
NO removing
carpets &
floorboards
NO
The RF base features a unique identification (ID)
coding system that prevents individual systems in
a group of properties from interacting with each
other causing nuisance alarms.
No extra wires, means no mess and no fuss.
Time on site is kept to a minimum with very little
disruption to a property. There is no need to lift
floor boards and carpets or channel out walls
even re-decorating after an installation can
now be avoided. Home owners and tenants will
benefit from minimum disruption during the whole
installation process.
The RF base incorporates the very latest
lithium battery technology. Built in tamper
proof cells provide a minimum of 10 year life
ensuring continuous protection even in the event of
a power cut!
Each base unit is equipped with a radio receiver
and transmitter which can be used with up to 50
smoke and heat alarms.
Ionisation, optical smoke and heat alarms can all be
used on the same system for maximum protection.
INTRODUCING THE
RF INTERLINK BASE...
DESIGNED FOR PROFESSIONALS BY PROFESSIONALS

About Push-Fit
The Push-Fit system has been
specifically designed to ensure
quick and easy installation of
base unit to the mains feed
supply at initial installation
stage (1st fix) and for quick
and easy connection of alarm
to base unit (2nd fix).
Quick set-up guide
A really simple system to install in 3 easy steps
1. Screw mounting base firmly to ceiling using
the fixings provided
2. Connect the mains wires to the terminal block
3. Push-fit the alarm into place. No need for
additional connector leads
Bedroom Landing
Bathroom
Living
Room Kitchen
Hall
Attic
RF TECHNOLOGY
AROUND THE HOME...
QUICK SET-UP
INSTALLATION GUIDE...
THE PROFESSIONAL STANDARD FOR OVER 40 YEARS .EST 1967

VISIT US ONLINE
www.brk.co.uk
CONTACT
TEL : [phone]
FAX : [phone]
EMAIL : [email protected]
A Sprue Safety Products Brand
SPRUE SAFETY PRODUCTS LTD
Unit 6, Carter Court, Davy Way
Waterwells Business Park, Quedgeley
Gloucester, GL2 2DE
United Kingdom
RF INTERLINK BASE
MODEL: DS700RF
The RF base provides a wireless link between smoke & heat alarms. Eliminates the need for connection
wires between each alarm. Can be used with any BRK mains operated smoke and heat alarms in the 650,
670 and 680 series.
Product features:
• 10yr lithium battery
• “Push-t” docking base system
• Automatic ID coding
• Multiple repeater RF signalling
• RF transmitter and receiver in each base unit
• Interlink up to 50 smoke & heat alarms
• Audible & visual LED fault warnings
• 5 year guarantee
5022391064275
15022391064272
Model Number DS700RF
5 years
Guarantee
Approvals Independently tested and compliant
with EMC, electrical Safety and Radio
Regulations to include requirements
of the R&TTE Directive.
EN300220 v2.3.2 (2010.02)
EN301489-1
EN301489-3
EN50130-4
EN60065
Unit weight 128g
Unit dimensions 140mm (Diameter) x 30mm (Height)
Pack dimensions 142mm (H) x 142mm (W) x 35mm (D)
Pack weight 170g
Master pack quantity 10
Master pack dimensions 155mm (H) x 190mm (W) x 280mm (D)
Master pack weight
Pack barcode
Outer barcode
2076g
Radio frequency: 868MHz
Operating temperature 5°C (40°F) to 38°C (100°F)
Sensitivity N/A
Battery type 10yr lithium battery
Technology
DC
Operation AC/DC
Alarm sound level Refer to smoke or heat alarm manual
10% to 85% relative
Operating humidity
Installation positions Ceiling (range 30m open area) 150m min
5°C (40°F) to 38°C (100°F)
Storage temperature
10% to 85% relative
Storage humidity
Description RF base system
Please note that specifications may be subject to change at any time.