Get more help at brnkl.io/help
BRNKL Mate Quickstart
Warning
Disconnect all AC
power sources before
accessing electrical
panels, switches, or
devices.
❷Connect wiring
❸Link with BRNKL
MQS1402022
Prepare POWER cable. Red to slot 10 or
constant 12-24V DC.
Black to slot 14 or
common ground.
Turn on Bluetooth®.
Don't pair devices.
Open BRNKL.From Settings, select
Add Device.
Select BRNKL Mate, then
follow instructions.
Position close to BRNKL
with access to ports.
Avoid placing with
ports facing up.
Face toward planned
wireless sensors.
Secure in place with
with supplied screws.
❶Install hardware
Turn on Bluetooth®. Don't pair devices.
Status indicator blinks
red when powered.
Unplug camera from
BRNKL device port.
Plug BRNKL cable into
BRNKL device port.
Plug camera cable into
Mate port.
Status indicator blinks
green when linked.
Stay within 5 m (15 ft) of the Mate during this process.
© Copyright 2022 Barnacle Systems Inc. BRNKL is a trademark of Barnacle Systems Inc.
