Broadcom WIC-ED Sense Kit 2 User manual

Broadcom®Sept. 24, 2015 • MMPWICED-Smart-DQSG101-R
WICED Sense Kit 2
Quick Start
Broadcom Corporation
5300 California Avenue
Irvine, CA 92617
© 2015 by Broadcom Corporation
All rights reserved
Printed in the U.S.A.
Broadcom®, the pulse logo, Connecting everything®, and the Connecting everything
logo are among the registered trademarks of Broadcom Corporation and/or its
subsidiaries in the United States, certain other countries, and/or the EU. Any other
trademarks or trade names mentioned are the property of their respective owners.
Broadcom®Corporation reserves the right to make changes without further notice to
any products or data herein to improve reliability, function, or design.
Information furnished by Broadcom Corporation is believed to be accurate and reliable.
However, Broadcom Corporation does not assume any liability arising out of the
application or use of this information, nor the application or use of any product or circuit
described herein, neither does it convey any license under its patent rights nor the
rights of others.
Internal Broadcom Use Only

Introduction
The WICED Sense Kit 2 is made up of the BCM20737L
Bluetooth Low Energy SoC and four ST Microelectronics
sensors: gyroscope/accelerometer, eCompass, pressure, and
humidity/temperature. The BCM20737L connects directly to
the sensors without the need for an external micro-processor.
The WICED Sense smartphone application receives and
displays real-time data from the sensors.
Kit Contents
1. One WICED Sense device
2. One USB-to-Micro USB cable
3. This document, which contains information about how to
download all required software, including the:
• WICED Sense sample application for iOS and Android
phones.
• WICED Smart Software Development Kit 2.X
Setup
Pair the WICED Sense Kit 2 and a Phone
1. Download the WICED Sense app for the:
•iPhone 4S (or greater) from the iTunes App Store
or
•Android phone from Google Play
2. When the download is complete, start the WICED Sense
app.
3. On the WICED Sense device:
a. Remove the plastic shipping strip in the battery
compartment (pull the tab).
b. Press the Wake button. See the WICED Sense device
illustration for the location of the Wake button.
4. Use a sharp object, such as a pin, to press and hold
Reset on the back of the device in order to use the SDK
and USB connection to re-program the kit with custom
firmware.
Kit Components
Humidity
Sensor
USB Port
(Not Visible)
Wake
Button
App
Button
USB Cable
Sense Tag Phone App UI
Buzzer On
the Back
Reset on the back side
(see note)
NOTE: Reset is between and slightly below the FCC and CE
logos on the back of the device: Reset
For additional information and/or to download the WICED
Smart SDK visit:
http://www.broadcom.com/wicedsense
For additional support and/or to download the WICED Sense
reference design package, visit:
https://community.broadcom.com/community/wiced-smart
Note:
ST Microelectronics Devices used in the WICED Smart Kit
(http://www.st.com/web/en/catalog/sense_power/...):
• Gyroscope/ Accelerometer Combo (L5M6D3)
• eCompass (LIS3MDLTR)
• Pressure sensor (LPS25HBTR)
• Humidity/Temperature Combo (HTS221)
Internal Broadcom Use Only