BroadLink e-Remote User manual

e-Remote
Wi-Fi Universal Remote
Contain
USB LineAC/DC Adapter
Reset
Temp SensorBlue
Wi-Fi Light
Yellow
Indicator light
Micro USB
Front Right Side
RM-Pro/RM-Home
Add: Room106,No.1Building,No.611JianghongRoad,
BinjiangDistrict,Hangzhou,Zhejiang,China(310052)
Hangzhou Gubei Electronics Technology Co.,Ltd
[phone]
Service hour: 09:00-18:00
5*8 hour Servicer
e-Remote Wi-Fi Universal Remote
User Guide

Router
Plug the RM’s power supply into a power outlet, and keep RM in Wi-Fi coverage, then connect
your smartphone to Wi-Fi。
Ensure the Wi-Fi light on RM is flashing rapidly at about 5-6 times per sec.
Otherwise, please press reset button until the blue light is fast flashing.
Reset
Plug in and keep blue
light fast flashing
Download Free Broadlink APP e-Control Configure
Visit at www.broadlink.com.cn by using
your smartphone internet browser,and
press “App Download” to download and
install(Android phone automatically
download and install, iOS phone will skip
to AppStore).
e-Control
Scan the QR code from packing box or
user manual to download and install the
APP.
Download the free BroadLink App from
the Apple App store or Google Play
Store by searching for “e-Control” or
““BroadLink”.
A:
B:
C:
Smart Phone
The Wi-Fi light is flashing quickly
If the Wi-Fi light is flashing quickly it means that the Broadlink device is in the original factory
state.
It is ready for you to start configuring it.
The Wi-Fi light is flashing slowly
If the Wi-Fi light flashes slowly for 4 flashes and then stops flashing for 1 sec. and then repeats
this cycle it means the Broadlink device is waiting for you to configure it. Please press at the
upper right icon to start the configuration.
The Wi-Fi light is flashing very slowly
If the Wi-Fi Light is flashing 1 time every 3 sec indicates that the device has not connected to
the Wi-Fi.Check your Wi-Fi is running .
The Wi-Fi light is flashing slowly and continuously
If the Wi-Fi light keeps on flashing continuously at 1 flash per sec, it means the configuration
has failed, please reset the device and configure again.
FAQ
Wi-Fi light on the device is flashing
Only connect to your home Wi-Fi, and then can find your device. Once this is done you can
lock your device at “Device Info” page.
How to protect my device and prevent others finding it?
Note
Warning
Please refer to User Manual in Broadlink APP for detail.
1-Year Limited Warranty.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.