BroadLink RM Pro+ User manual

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.

Broadlin
Universal Remote
RM pro+
fyoeo®d
Q| BroadLink International
For more promotions and supports
web: www.ibroadlink.com
e-mail: [email protected]
1 Add Device
Make sure the device is
in configuration mode
xcE»
e
power source
» Power on the device. If it is in first time use, it
will be in smart configuration mode automat-
ically, otherwise you may need to reset it.
* When the device is in smart configuration
mode, follow the wizard in App to add device,
name it and assign it to a room.
« If you have difficulties to add device in smart
configuration mode, please refer to
Indications to try AP configuration.
« In device page, tap "Add remote” and follow
the wizard to add a virtual remote for your IR
or RF device.
- If any button is not functional, please select
“Learn buttons” from menu in remote panel
and tap the button to start learning until the
button is tested working.
I Overview Unit: mm
AAAAAAAAARALALOLS
RMprox1 USB cable x 1
Reset button
Power input
(Micro USB)
Operation LED
(Orange)
Wi-Fi LED
(Blue)
36.5
Mounting holes
0000pppppponnaddl
114.6
1 Indications
Status Indication
Flashes quickly Device is in smart configuration
(2-3 times / sec) mode (waiting to be added).
Flashes quickly and Device is in AP configuration
off alternatively mode (waiting to be added)
Flashes from quickly Device is being configured and
to slowly then off ~ then added to network.
Flashes slowly Device is failed to connect
(once / sec) network
Flash once IR / RF signal is sent
Reset for Smart Configuration
* Press and hold the reset (on/off) button using
a needle for 6s until the LED flashes quickly.
Reset for AP Configuration
* Only when the LED flashes quickly, press and
hold the reset (on/off) button using a needle
for another 6s until the LED flashes quickly
and off alternatively.
I Prepare App
* Download “BroadLink” App from the App
Store or Google Play by searching or
scanning the QR code.
* Open the App, sign up an account and follow
the wizard to set up your home for first use.
O
|
cal,
:
[ |
J- i.
NOTE:
- Make sure your phone is connected to
2.4GHz Wi-Fi network before adding device
(5GHz is not supported).
* The Wi-Fi password should contain no more
than 32 characters and no special characters
which are not available on standard keyboard
layout.