Brocade Communications Systems FCX Series Manual

53-1002977-01
30 September 2013
Brocade FCX Series
Hardware Installation Guide
Supporting FastIron Software Release 08.0.01

Copyright © 2013, Brocade Communication Systems, Inc. All Rights Reserved.
ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, FastIron , ICX, MLX, MyBrocade, NetIron, OpenScript,
ServerIron, VCS, VDX, and Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center
are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service
names mentioned may be trademarks of their respective owners.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any
equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document
at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be
currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in
this document may require an export license from the United States government.
The authors and Brocade Communication Systems, Inc. shall have no liability or responsibility to any person or entity with respect to any
loss, cost, liability, or damages arising from the information contained in this book or the computer programs that accompany it.
The product described by this document may contain “open source” software covered by the GNU General Public License or other open
source license agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to
the open source software, and obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.

Contents
Preface.....................................................................................................................................5
Document conventions......................................................................................5
Brocade Resources...........................................................................................7
Getting technical help........................................................................................7
Document feedback.......................................................................................... 8
About This Document................................................................................................................ 9
Introduction....................................................................................................... 9
Supported Software.............................................................................. 9
What’s new in this document ........................................................................... 9
Product Overview.................................................................................................................... 11
Hardware features...........................................................................................11
Control features...................................................................................15
Power supplies....................................................................................32
Installing the FCX Switch.........................................................................................................33
Unpacking the device......................................................................................33
Package contents................................................................................33
General requirements......................................................................... 33
Installation tasks..............................................................................................34
Installation precautions................................................................................... 35
General precautions............................................................................35
Lifting precautions............................................................................... 35
Power precautions.............................................................................. 35
Preparing the installation site.......................................................................... 36
Cabling infrastructure.......................................................................... 36
Installation location..............................................................................36
Installing the device.............................................................................37
Desktop installation............................................................................. 37
Rack mount installation....................................................................... 38
Connecting devices in a traditional stack........................................................ 41
Stacking ports..................................................................................... 41
Stacking configuration requirements...................................................44
Stacking cables................................................................................... 44
Stack size............................................................................................44
Stacking topologies............................................................................. 44
Extended distance stacking................................................................ 48
Powering on the system..................................................................................48
Attaching a PC or terminal.............................................................................. 49
Wiring map for serial cable..................................................................50
Installing and replacing a power supply unit................................................... 50
Installing or replacing fan trays....................................................................... 52
Installing an optional module ..........................................................................53
Optional 2-port 10 Gbps SFP+ uplink module.....................................55
Brocade FCX Series Hardware Installation Guide 1
53-1002977-01

Checking Network Devices and Testing Connectivity...............................................................59
Assigning permanent passwords.................................................................. 59
Setting passwords.............................................................................60
Recovering from a lost password......................................................60
Configuring IP addresses..............................................................................61
Devices running Layer 2 software.....................................................61
Devices running Layer 3 software.....................................................62
Connecting network devices............................................................. 65
Connectors........................................................................................65
Cable specifications.......................................................................... 65
Connecting to Ethernet or fast Ethernet hubs...................................65
Connecting to workstations, servers, or routers................................66
Connecting a network device to a fiber port......................................67
Testing connectivity.......................................................................................71
Pinging an IP address.......................................................................71
Observing LEDs................................................................................71
Tracing a route..................................................................................73
Troubleshooting network connections.......................................................... 74
Using Virtual Cable Testing to diagnose a cable.............................. 74
Digital optical monitoring...................................................................75
Managing the FCX Hardware................................................................................................. 77
Managing temperature settings.................................................................... 77
Using the temperature sensor...........................................................77
Removing MAC address entries....................................................... 80
Displaying FCX CPU usage..........................................................................81
Hardware maintenance schedule................................................................. 81
Replacing a copper or fiber optic module..................................................... 81
Removing a copper or fiber optic module......................................... 82
Cabling a fiber optic module..............................................................83
Cleaning the fiber optic connectors...................................................83
Hardware Specifications....................................................................................................... 85
Hardware specifications................................................................................85
Physical dimensions and weight....................................................... 85
Environmental considerations...........................................................85
Cooling system and fans...................................................................86
Pinouts and signalling....................................................................... 89
Cable specifications.......................................................................... 91
Power cords...................................................................................... 92
AC power supply specifications........................................................ 93
Troubleshooting ................................................................................................................... 95
Diagnosing switch indicators ........................................................................95
Power and cooling problems.............................................................95
Installation.........................................................................................95
In-band access..................................................................................95
Regulatory Statements..........................................................................................................97
USA (FCC CFR 47 Part 15 Warning)............................................................97
Industry Canada statement...........................................................................97
2Brocade FCX Series Hardware Installation Guide
53-1002977-01

Europe and Australia (CISPR 22 Class A Warning)....................................... 98
Germany (Noise Warning).............................................................................. 98
Japan (VCCI).................................................................................................. 98
Japan power cord............................................................................................98
Korea...............................................................................................................99
China.............................................................................................................100
BSMI statement (Taiwan)..............................................................................100
Regulatory compliance..................................................................................101
Cautions and Danger Notices................................................................................................103
Cautions........................................................................................................ 103
Danger notices.............................................................................................. 107
Index.................................................................................................................................... 111
Brocade FCX Series Hardware Installation Guide 3
53-1002977-01

4 Brocade FCX Series Hardware Installation Guide
53-1002977-01

Preface
● Document conventions......................................................................................................5
● Brocade Resources...........................................................................................................7
● Getting technical help........................................................................................................7
● Document feedback.......................................................................................................... 8
Document conventions
Text formatting conventions
The following text formatting conventions may be used in the flow of the text to highlight specific words
or phrases.
Format Description
bold text Identifies command names
Identifies keywords and operands
Identifies the names of user-manipulated GUI elements
Identifies text to enter at the GUI
italic text Identifies emphasis
Identifies variables and modifiers
Identifies paths and Internet addresses
Identifies document titles
code Identifies CLI output
Identifies command syntax examples
Command syntax conventions
The following text formatting conventions identify command syntax components.
Convention Description
bold text Identifies command names, keywords, and command options.
italic text Identifies a variable.
value In Fibre Channel products, a fixed value provided as input to a command
option is printed in plain text, for example, --show WWN
Brocade FCX Series Hardware Installation Guide 5
53-1002977-01

Convention Description
[ ] Syntax components displayed within square brackets are optional.
Default responses to system prompts are enclosed in square brackets.
{x|y|z}A choice of required parameters is enclosed in curly brackets separated by
vertical bars. You must select one.
In Fibre Channel products, square brackets may be used instead for this
purpose.
x|yA vertical bar separates mutually exclusive elements.
< > Nonprinting characters, for example, passwords, are enclosed in angle
brackets.
... Repeat the previous element. For example, member[member...]
\
Indicates a “soft” line break in command examples. If a backslash separates
two lines of a command input enter the entire command at the prompt without
the backslash
italic text Identifies a variable.
bold text Identifies command names, keywords, and command options.
Notes, cautions, and warnings
The following notices and statements may be used in this document. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance, or advice, emphasizes important information, or provides a reference
to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause
damage to hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or
extremely hazardous to you. Safety labels are also attached directly to products to warn of
these conditions or situations
Preface
6 Brocade FCX Series Hardware Installation Guide
53-1002977-01

Brocade Resources
Related publications
You can download additional publications supporting your product from the Brocade website at
www.brocade.com.
• Adapter documentation is available on the Downloads and Documentation for Brocade Adapters
page. Select your platform and scroll down to the documentation section.
• For all other products, select the Brocade product to open the individual product page, click the
Brocade product name or image to open the individual product page. The user manuals are
available in the resources module at the bottom of the page under the Documentation category.
Additional Brocade resources
To get up-to-the-minute information, go to MyBrocade. You can register at no cost to obtain a user ID
and password.
Release Notes are available on MyBrocade under Product Downloads.
White papers, online demonstrations, and data sheets are available through the Brocade website.
Getting technical help
For product support information and the latest information on contacting the Technical Assistance
Center, go to http://www.brocade.com/services-support/index.html
Contact Brocade Support 24x7
Use one of the following methods to contact the Brocade Technical Assistance Center.
Online Telephone Email
Preferred method of contact for non-
urgent issues:
•My Cases through MyBrocade
•Software downloads & licensing
tools
•Knowledge Base
Required for Sev 1-Critical and Sev
2-High issues:
• Continental US:
1-800-752-8061
• Europe, Middle East, Africa,
and Asia Pacific: +800-AT
FIBREE ([phone])
• For areas unable to access toll
free number: [phone]
•Toll-free numbers are available
in many countries.
[email protected]
Please include:
• Problem summary
• Serial number
• Installation details
• Environment description
Brocade Resources
Brocade FCX Series Hardware Installation Guide 7
53-1002977-01

Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a topic
needs further development, we want to hear from you. You can provide feedback in two ways:
• Through the online feedback form in the HTML documents posted on www.brocade.com.
• By sending your feedback to [email protected].
Provide the publication title, part number, and as much detail as possible, including the topic
heading and page number if applicable, as well as your suggestions for improvement.
Document feedback
8 Brocade FCX Series Hardware Installation Guide
53-1002977-01

About This Document
● Introduction....................................................................................................................... 9
● What’s new in this document ........................................................................................... 9
Introduction
This guide includes procedures for installing and maintaining the hardware. The hardware procedures
show how to install or assemble the various hardware components with the necessary precautions,
warnings, and regulatory statements. This guide also describes the required device specifications for
running the hardware.
Supported Software
For information about the features supported on a hardware platform, refer to the appropriate
configuration guide.
What’s new in this document
This section lists the enhancements for FastIron release 08.0.01.
Summary of Enhancements in FastIron release 08.0.01TABLE 1
Feature Description Described in
2-port 10 Gbps SFP+ uplink
module
The two-port 10 Gbps SPF+ uplink module
operates at 10 Gbps full duplex.
Optional 2-port 10 Gbps SPF+
uplink module
Brocade FCX Series Hardware Installation Guide 9
53-1002977-01

10 Brocade FCX Series Hardware Installation Guide
53-1002977-01

Product Overview
● Hardware features...........................................................................................................11
Hardware features
The following hardware platforms are supported by this release of this guide:
• The Brocade FCX 624S stackable switch has twenty 10/100/1000 Mbps ports plus four Combo
ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP ports. The
switch has two management interfaces, a DB9 serial port (Console) on the front panel and an RJ45
port (Out-of-band Management Interface) on the rear panel. Two rear-panel power supply
receptacles allow for up to two power supply units. Two dedicated 16 GbE CX4 ports on the rear
panel allow stacking for up to eight units. The front panel also has a module slot for an optional
two-port 10 Gbps XFP module.
• The Brocade FCX 648S stackable switch has forty four 10/100/1000 Mbps RJ45 ports plus four
Combo ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP
ports. The switch has two management interfaces, a DB9 serial port (Console) on the front panel
and an RJ45 port (Out-of-band Management Interface) on the rear panel. Two rear-panel power
supply receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet CX4
ports on the rear panel allow stacking for up to eight units. The front panel also has a module slot
for an optional two-port 10 Gbps Ethernet XFP module.
• The Brocade FCX 624S-F stackable switch has two management interfaces, a DB9 serial port
(Console) on the front panel and an RJ45 port (Out-of-band Management Interface) on the rear
panel. Two rear-panel power supply receptacles allow for up to two power supply units. Two
dedicated 16 Gbps Ethernet CX4 ports on the rear panel allow stacking for up to eight units. The
front panel also has a module slot for an optional two-port 10 Gbps Ethernet XFP module.
• The Brocade FCX 624S-HPOE stackable switch has twenty 100/1000 Mbps ports plus four Combo
ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP ports. The
switch has two management interfaces, a DB9 serial port (Console) on the front panel and an RJ45
port (Out-of-band Management Interface) on the rear panel. Two rear-panel power supply
receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet CX4 ports on
the rear panel allow stacking for up to eight units. The front panel also has a module slot for an
optional two-port 10 Gbps Ethernet XFP module.
• The Brocade FCX 648S-HPOE has is a stackable switch with forty four 10/100/1000 Mbps ports
plus four Combo ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps
SFP ports. The switch has two management interfaces, a DB9 serial port (Console) on the front
panel and an RJ45 port (Out-of-band Management Interface) on the rear panel. Two rear-panel
power supply receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet
CX4 ports on the rear panel allow stacking for up to eight units. The front panel also has a module
slot for an optional two-port 10 Gbps Ethernet XFP module.
• The Brocade FCX 624-E switch has twenty four 10/100/1000 Mbps ports. The device has two
management interfaces on the front panel, a DB9 serial port (Console) and an RJ45 port (Out-of-
band Management Interface). The front panel has a slot for an optional four-port 1GbE SFP module
(works as Combo port) or four-port 10 Gbps SFP+ module. On the rear panel a removable fan tray
provides a cooling airflow from the front to the rear of the device. Two rear-panel power supply
receptacles accommodate up to two power supply units that also support a front-to-rear cooling
airflow.
Brocade FCX Series Hardware Installation Guide 11
53-1002977-01

• The Brocade FCX 624-I switch has twenty four 10/100/1000 Mbps ports. The device has two
management interfaces on the front panel, a serial port (Console) and an RJ45 port (Out-of-band
Management Interface). The front panel has a slot for an optional four-port 1GbE SFP module
(works as Combo port) or four-port 10 Gbps SFP+ module. On the rear panel a removable fan
tray provides a cooling airflow from the rear to the front of the device. Two rear-panel power
supply receptacles accommodate up to two power supply units that also support a rear-to-front
cooling airflow.
• The Brocade FCX 648-E switch has forty four 10/100/1000 Mbps ports. The device has two
management interfaces on the front panel, a serial port (Console) and an RJ45 port (Out-of-band
Management Interface). The front panel has a slot for an optional four-port 1GbE SFP module
(works as Combo port) or four-port 10 Gbps SFP+ module. On the rear panel a removable fan
tray provides a cooling airflow from the front to the rear of the device. Two rear-panel power
supply receptacles accommodate up to two power supply units that also support a front-to-rear
cooling airflow..
• The Brocade FCX 648-I switch has forty four 10/100/1000 Mbps ports. The device has two
management interfaces on the front panel, a serial port (Console) and an RJ45 port (Out-of-band
Management Interface). The front panel has a slot for an optional four-port 1GbE SFP module,
(works as Combo port) or four-port 10 Gbps SFP+ module. On the rear panel a removable fan
tray provides a cooling airflow from the rear to the front of the device. Two rear-panel power
supply receptacles accommodate up to two power supply units that also support a rear-to-front
cooling airflow.
NOTE
All FCX models support Layer 2 and Enterprise Layer 3 protocols (RIP, OSPF, PIM). FCX models can
be ordered from the factory as -ADV (Advanded Layer 3) models, which adds support for the Layer 3
BGP routing protocol and GRE.
The following sections describe the physical characteristics of the FastIron CX models. For more
details about physical dimensions, power supply specifications, and pinouts, refer to the "Hardware
Specifications" section.
The following figures show the front panels of the FastIron CX models. For more information about
Combo ports, see Network interfaces for Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I
Product Overview
12 Brocade FCX Series Hardware Installation Guide
53-1002977-01

on page 15. For more information about control features in general, see Control features on page
15.
FIGURE 1 Brocade FCX 624S front panel
FIGURE 2 Brocade FCX 648S front panel
FIGURE 3 Brocade FCX 624S-F front panel
FIGURE 4 Brocade FCX 624S-HPOE front panel
FIGURE 5 Brocade FCX 648S-HPOE front panel
FIGURE 6 Brocade FCX 648S-HPOE rear panel
FIGURE 7 Brocade FCX 624-E front panel
FIGURE 8 Brocade FCX 624-I front panel
Product Overview
Brocade FCX Series Hardware Installation Guide 13
53-1002977-01

FIGURE 9 Brocade FCX 648-E front panel
FIGURE 10 Brocade FCX 648-I front panel
FIGURE 11 Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I rear panels
CAUTION
For the Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I devices, be sure that the
airflow direction of the power supply unit matches that of the installed resiliant quad-fan fan
tray. The power supplies and fan trays are clearly labeled with either a green arrow with an "E",
or an orange arrow with an "I".
Device Label on required power supply Label on required fan tray
Brocade FCX 624-E and Brocade
FCX 648-E
Product Overview
14 Brocade FCX Series Hardware Installation Guide
53-1002977-01

Device Label on required power supply Label on required fan tray
Brocade FCX 624-I and Brocade
FCX 648-I
Control features
Each device front panel includes the following control features:
• Serial management interface (the DB9 port labeled Console )
• Out-of-band RJ45 management Interface
Serial management interface (DB9 Console port)
The serial management interface allows you to configure and manage the device using a third-party
terminal emulation application on a directly-connected PC. A straight-through EIA or TIA DB9 serial
cable (M or F) ships with the device. The serial management interface (the DB9 Console port) is located
in the left corner of the front panel.
Out-of-band RJ45 management interface
The out-of-band RJ45 management interface enables you to configure and manage the device using a
third-party terminal emulation application on a directly-connected PC.
Network interfaces for Brocade FCX 624S, FCX 648S, FCX 624S-F, FCX 624S-HPOE, and FCX
648S-HPOE
FCX devices contain the following interfaces:
• 10/100/1000 Mbps ports with RJ45 copper connectors
• 100/1000 Mbps ports with mini-GBIC slots for SFP MSA-compliant fiber transceivers
• Optional 2-port 10Gbps Ethernet XFP module
• CX4 stacking ports
NOTE
Brocade recommends that you refer to Cable specifications before connecting a cable to any of the
ports.
Network interfaces for Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I
FastIron CX devices contain the following interfaces:
Control features
Brocade FCX Series Hardware Installation Guide 15
53-1002977-01

• 10/100/1000 ports with RJ45 copper connectors
• 100/1000 ports with mini-GBIC slots for MSA-compliant SFP transceivers
• Optional 4-port 1Gbps Ethernet SFP module
• Optional 4-port 10Gbps Ethernet SFP+ module
NOTE
Brocade recommends that you refer to Cable specifications before connecting a cable to any of the
ports.
FastIron CX 10/100/1000 BASE-T ports
All FastIron CX devices except for the fiber models contain 24 or 48 RJ45 ports that operate at 10
Mbps or 100 Mbps, half or full duplex, or at 1000 Mbps, full duplex. FCX fiber models contain 24 SFP
ports. Because all ports support automatic MDI or MDI-X operation, you can use straight-through
cables for all network connections to PCs or servers, or to other switches or hubs. In addition, it is
ideal and preferred to use straight-through cable for switch-to-switch connections.
Each of these ports supports auto-negotiation, so the optimum transmission mode (half or full duplex),
and the data rate (10, 100, or 1000 Mbps) can be selected automatically. If a device connected to one
of these ports does not support auto-negotiation, the communication mode of the port can be
configured manually.
Combination ports
FCX devices contain four combination ports, which are four Small Form Factor Pluggable (SFP)
network interfaces (1F~4F) that are shared with four of the RJ45 ports (ports 1~4). In the default
configuration, if an SFP transceiver is installed in a slot and has a valid link on its port, the associated
RJ45 port is disabled and cannot be used. The switch can also be configured to force the use of a
combination RJ45 port or SFP slot, as required.
NOTE
Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I devices do not ship with SFP ports. You
must install the optional SFP module for SFP support.
Slot locations
There are three slot locations on Brocade FCX Series devices: slots 3 and 1 on the front panel and
slot 2 on the rear panel.
FIGURE 12 Slot locations on the front panel of Brocade FCX Series devices
Product Overview
16 Brocade FCX Series Hardware Installation Guide
53-1002977-01

1. Slot 3
2. Slot 1
FIGURE 13 Slot location on the rear panel of Brocade FCX Series devices
1. Slot 2 (default stacking ports)
Slot designations
The slot designations for FCX models:
Stack unit slots for FCX stackable devices TABLE 2
Device Slot 1 Slot 2 Slot 3
Brocade FCX 624S 20 10/100/1000 Mbps ports plus 4
Combo ports (RJ45 ports 1-4, or SFP
ports 1F-4F)
2-port 16 Gbps CX4
stacking module on rear
panel
2-port 10 Gbps
XFP module
Brocade FCX 648S 44 20 10/100/1000 Mbps ports plus 4
Combo ports (RJ45 ports 1-4, or SFP
ports 1F-4F)
2-port 16 Gbps CX4
stacking module on rear
panel
2-port 10 Gbps
XFP module
Brocade FCX 624S-F 20 100/1000 Mbps SFP ports plus 4
Combo ports 10/100/1000 Mbps RJ45
on front panel
2-port 16 Gbps CX4
stacking module on rear
panel
2-port 10 Gbps
XFP module
Brocade FCX 624-E and
Brocade FCX 624-I devices
with optional 4-port 1 Gbps
SFP module
20 10/100/1000 Mbps RJ45 ports, plus
4-port 1 Gbps SFP module (optional
module) combined with the first four
10/100/1000 Mbps RJ45 copper ports
(acting as a Combo port).
N/A N/A
Brocade FCX 648-E and
Brocade FCX 648-I devices
with optional 4-port 1 Gbps
SFP module
44 10/100/1000 Mbps RJ45 ports, plus
4-port 1 Gbps SFP module (optional)
combined with the first four
10/100/1000 Mbps RJ45 copper ports
(acting as a Combo port).
N/A N/A
Brocade FCX 624-E and
Brocade FCX 624-I devices
with optional 4-port 10 Gbps
SFP+ module
24 10/100/1000 Mbps RJ45 ports 4-port 10 Gbps SFP+
module on front panel
(optional module)
N/A
Product Overview
Brocade FCX Series Hardware Installation Guide 17
53-1002977-01

Stack unit slots for FCX stackable devices (Continued)TABLE 2
Device Slot 1 Slot 2 Slot 3
Brocade FCX 648-E and
Brocade FCX 648-I devices
with optional 4r-port 10 Gbps
SFP+ module
48 10/100/1000 Mbps RJ45 ports 4-port 10 Gbps SFP+
module on front panel
(optional module)
N/A
SFP interfaces
This section describes the network interfaces supported on FCX devices. For information about
supported SFP and SFP+ transceivers, refer to the following Brocade website:
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/Optics_DS.pdf
SFP network interfacesTABLE 3
Interface Show Media Description
1000Base-BX-D M-GBXD
1000Base-BX-U M-GBXU
1000Base-LHA M-LHA
1000Base-LHB M-LHB
1000Base-LX M-LX
1000Base-LH M-LH
1000Base-SX M-SX
1000Base-T C
100Base-T C**
10Base-T C**
100Base-FX M-FX
Optional two-port 10 Gbps XFP uplink module
The Brocade FCX 624S, FCX 648S, FCX 624S-F, FCX 624S-HPOE, and FCX 648S-HPOE devices
include a slot on the front panel for a two-port 10 Gbps XFP uplink module. This module operates at
10 Gbps full duplex.
SFP interfaces
18 Brocade FCX Series Hardware Installation Guide
53-1002977-01