brondell PURESPA PS-65 User manual

OWNER MANUAL
PS-65 Bidet Attachment

Product Features ....................Page 2
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Product Specs.......................Page 4
Installation ..........................Page 4
Operation...........................Page 9
Maintenance ........................Page 10
Warranty............................Page 11
Contact.............................Page 12
Spanish Version .....................Page 13
French Version ......................Page 26
CONTENTS

PRODUCT FEATURES
• High-quality ABS material with full body panel
• Hygienic retractable nozzle
• Self-cleaning nozzle feature
• Ambient temperature bidet wash
• Positionable nozzle
• Adjustable water pressure
• Ceramic core internal valve with patented uni-body
construction for safety
• High-quality metal 7/8” T-valve
• Durable braided metal cold water hose
• No electricity or batteries required
• Easy installation and adjustable toilet fit
• All accessories included for standard installation
• One-year warranty
2

Bidet attachment with turn-dial control and adjustable brackets
T-Valve connector
⁄"x ⁄"x ⁄"
Owner manual
Large rubber washer (2)
PARTS LIST
3
WHAT'S IN THE BOX?
25” braided metal
bidet hose

4
PRODUCT SPECS
INSTALLATION
IMPORTANT
Please be advised that the provided
T-Valve should be installed at the Fill
Valve under the toilet tank, and NOT
at the cold water supply coming from
the wall.
If you do not have access to the Fill
Valve under the toilet tank, contact
Brondell Customer Service at
888.542.3355. We may be able to
guide you through the process.
4.1"–7.9"
3.14"
1.3" at deepest point
on control panel
0.4" deep
13.4"
6.3"
5.5"

1. Remove existing toilet seat
a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting
bolts. Alternatively, you may need to loosen
mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat,
mounting bolts and hardware aside.
INSTALLATION cont.
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water
shuto valve at the wall. If it is a rigid pipe, you will need to purchase a flexible
water supply hose to replace it before installing the PureSpa. The length of the
hose may vary, and the top connection size should be 7/8” Ballcock to connect to
the T-valve that you will install under the toilet tank, and the bottom connection will
vary (most common are 3/8” and 1/2” female compression).
BEFORE INSTALLATION
INSTALLING THE BIDET ATTACHMENT
Step 1b
5
Step 2c
2. Turn o water supply valve and flush toilet
a. Turn o water supply at the wall to stop flow
of water.
b. Flush toilet and hold down handle to
completely empty toilet tank.
c. Disconnect water supply hose from the fill
valve under the toilet tank.

6
3. Connect 7/8” T-Valve to Water Supply Line and
Fill Valve Under Toilet Tank.
a. Install the 7/8” T-valve with one or both of
the rubber washers to the incoming water
connection on the bottom of your toilet tank.
b. Connect the cold water supply line coming
from the wall to the bottom of the T-valve.
4. Connect Bidet Hose to T-Valve
a. Connect one end of the braided metal bidet
hose to the remaining open side of the
installed T-valve.
Step 3a
Step 3b
Step 4a

b. Make sure the adjustable brackets line
up with the holes in the toilet fixture. You
may need to move the adjustable brackets
accordingly to line up properly.
c. Replace the toilet seat on top of bidet
attachment and secure using original toilet
seat hardware. Make sure to tighten so that
the bidet attachment and seat do not move.
5. Install Bidet Attachment on Toilet
a. Place bidet attachment on the toilet so the
nozzle is as close to the back of the toilet
bowl as it will go. This will vary by toilet.
INSTALLATION cont.)
Step 5a
Step 5b
Step 5c
7

8
7. Turn on Water Supply and check for leaks
a. Open the main water supply valve slowly and check for leaks.
b. Wait 5-10 minutes, check again and if there are no leaks continue.
Note: if there is any leaking, check all rubber washers and make sure all water
connections are tight and secure. If necessary, you can use plumbers tape for
any leaking connections.
6. Connect Bidet Hose to Bidet Attachment
a. Connect open end of bidet hose to the
connection on the back side of the bidet
attachment.
Step 6a

To clean the bidet nozzle, turn the control dial towards the “Nozzle Cleaning”
position and water should wash over the nozzle.
For the general bidet wash function, turn the dial towards the “Wash” position.
• The further the dial is turned, the higher the water pressure will be.
• To lower the water pressure, turn the nozzle back towards the center.
The nozzle can be easily adjusted by gently
pulling the end of the nozzle forward or
backwards. Once desired position is set, the
nozzle will remain in that position until manually
moved.
OPERATION
USING THE PURESPA
NOZZLE POSITIONING
9