brondell Swash 300 User manual

OWNER’S MANUAL
S300-EW
S300-RW

2
This manual contains important safety information. Before operating the
unit, please read this manual thoroughly, and retain it for future reference.
TABLE OF CONTENTS
Section 1Product Features ......................................................... page 1
Section 2 Safety Precautions ...................................................... page 2-5
Section 3Parts & C............................................... page 6-7
Section 4Installation ..................................................................... page 8-11
Section 5Operation ....................................................................... page 12-17
Section 6 ............................................................... page 18
Section 7 Maintenance ................................................................. page 19-20
Section 8Troubleshooting ......................................................... page 21-22
Section 9 Warranty Information ............................................... page 23-24
Section 10 Contact Information .................................................. page 25

1
PRODUCT FEATURES
Ergonomic heated seat with sittable lid –heated seat has four temperature
settings (High/Med/Low/O .

Posterior and feminine warm water wash – warm water wash with adjustable
temperature and pressure settings.

Dual anti-bacterial nozzles – separate anti-bacterial nozzles resist soiling and
bacterial contamination for enhanced hygiene. T
accurate coverage for all types of users.

Wireless remote control – the intuitive remote control comes with a convenient
mounting bracket and includes its own Eco Mode to conserve battery life.

Aerated wash spray - micro-bubbles introduced into the wash spray create a gentler,
softer cleansing action designed for sensitive skin. In addition, the aerated spray
rective in cleansing the skin.

Automatic Eco Mode – when engaged, the power saving Eco Mode function
automatically lowers the seat temperature settings to conserve energy.

Gentle closing seat and lid –“slam free” gentle closing seat and lid are user friendly.

Quick release seat – quick release button for easy removal and cleaning of seat and
toilet.

Self cleaning nozzles – the nozzles automatically cleanse themselves after each use
of the bidet seat.

Safety tested – three part safety sensor system ensures complete safety by
y hazardous conditions. The PBA molding
forms a waterproof, airtight unit preventing moisture penetration.

2
SAFETY PRECAUTIONS
WARNING:
DANGER:
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
DANGER-To reduce the risk of electrocution
If not observed, serious injury or even death may occur as a result of
electrocution.
READ ALL INSTRUCTIONS BEFORE USING.
Save these instructions for future reference.
When using electrical products, especially when children are present, basic safety precautions
should always be taken:

3
SAFETY PRECAUTIONS

4
property damage or product damage.
used.
WARNING
SAFETY PRECAUTIONS

5
SAFETY PRECAUTIONS
• This product should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape route (wire) for the electric current.
This product is equipped with a cord consisting of a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
• If the repair or replacement of the cord or plug is necessary, do not connect the grounding
wire to either at blade terminal. The insulation wire with an outer green surface with or
without yellow stripes is the grounding wire.
• Check with a qualied electrician or service technician if you do not understand the grounding
instructions completely, or if you are in doubt whether the product is properly grounded.
• This product is for use on a nominal 120 V circuit, and has a grounding
plug that looks like the plug illustrated in Figure 1.
Grounded
Outlet Grounding
Pin
Figure 1
The improper use of the grounding plug can result in electric shock.
GROUNDING INSTRUCTIONS

6
PARTS & CONFIGURATION
The Swash 300 has the following dimensions:
The Swash 300: Round Size
The Swash 300: Elongated Size
Bottom View Distance Between Mounting Holes
70 mm (2.76 inch)

7
PARTS & CONFIGURATION
Product C ation
1. Lid
2. Warning sticker
3. IR sensor
4. Nozzles
5. Bidet seat
6. Bidet hose
7. T-valve connector
8. Power cord
9. Drain plug
10.
11.Mounting plate
12.Quick release button

8
INSTALLATION
Installation Parts
1. 2 ea Mounting Bolt
2. 2 ea Rubber Cone Washer
3. 2 ea Flat Washer
4. 2 ea Barrel Nut
5. Mounting Plate
6. 2 ea Adjustable Bracket
7. Rubber T-Valve Washer
8. T-Valve Connector
9. Bidet Hose
10. Remote Control Wall Mount
11. 2 ea Remote Screw
12. 2 ea Remote Anchor
13. 3 ea AAA Batteries

9
INSTALLATION

10
INSTALLATION

11
INSTALLATION

12
OPERATION
Display Controls
A
A

13
OPERATION
Quick Reference Guide: Remote Control
Controls
Display
A
B
C

14
OPERATION
Quick Reference Guide: Remote Control (continued)

15
OPERATION

16
OPERATION
1.
cleansing is operating, the cleansing function will stop.

17
OPERATION
Selecting/Cancelling Eco Mode
1. Press and hold the“Rear cleansing” button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the“Rear Cleansing”.
Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, Eco Mode is ON.
b. If the bell rings twice, Eco Mode is turned OFF.
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.
Selecting/Cancelling Silent Mode
1. Press and hold the“Rear cleansing” button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the“Front Cleansing” .
Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, Silent Mode in ON.
b. If the bell rings twice, Silent Mode is OFF. (The seat will now make a“ding” sound
each time a button is pressed on the remote or side of seat.)
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.
Selecting/Cancelling Seat Sensor Lock Mode
1. Press and hold the“Rear cleansing” button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the“Stop” ock
Mode. Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, the Seat Sensor is locked ON.
b. If the bell rings twice, the Seat Sensor is turned OFF. (Someone will need to be
sitting on the seat in order for the wash functions to work.)
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.

18
SPECIFICATIONS
800 W