Brookstone airphones BKH600 User manual

TRUE WIRELESS EARBUDS
BKH600

IN THE BOX
User GuideEarbud Tips
Charging Case
True Wireless Earbuds
USB Type-C cable
TRUE WIRELESS EARBUDS
1

Multifunctional
Touchpad
LED Indicator
Charging
Connector
USB Type-C port
LED Indicators
2

Charging using the USB Type-C cable
Insert the USB Type-C cable into the USB port of the
charging case as shown below and connect the other
end to any USB Charger or charging device. The Charging
Case’s LED indicators will flash while charging and become
solid when fully charged.
CHARGING
Wall outlet
USB Charger
(not included)
USB Type-C Cable
USB Type-C port
Charging Case
3

See pages 11 and 12 for more details regarding the
charging case’s LED indicators.
Qi Charging
Wirelessly charge the case by placing it on any Qi wireless
Charging Pad (not included) as shown below.
Qi Wireless Charging Pad
Charging Case
4

POWER ON/OFF
The earbuds will automatically power
on when taken out of the charging
case, and power off when placed back
into the charging case.
To manually power the earbuds ON
or OFF follow the instructions below:
Power ON:
Touch and HOLD the Multifunctional
Touchpad on both earbuds for 2 seconds.
Power OFF:
Touch and HOLD the Multifunctional
Touchpad of any earbud for 8 seconds.
Note: If not connected to a Bluetooth enabled device,
the earbuds will automatically power off after 3 minutes.
L R
5

Follow the steps below to pair and connect the earbuds
to your Bluetooth enabled device.
Connecting
1. The earbuds will automatically
be in Bluetooth pairing mode
when taken out of the case for
the first time.
2. After the earbuds link with each
other, the LED of the right earbud
will quickly flash RED while the
LED of the left earbud will slowly
flash WHITE indicating they are
in Bluetooth pairing mode.
3. Open your device’s Bluetooth
menu and find Brookstone
BKH600 and select it to pair.
BLUETOOTH PAIRING
4. Once paired, the voice prompt “Connected” will be
heard and the LEDs of both earbuds will slowly flash
WHITE.
Note: After taking the earbuds out of the case, they will
automatically link to each other and then try to connect
to a previously paired Bluetooth enabled device. If they
do not find a device to connect to, they will automatically
be in Bluetooth pairing mode.
Disconnecting
Open the Bluetooth settings on your device, and select
“Disconnect” to disconnect from an already connected
device. You'll hear a voice prompt "Disconnected" and
the earbuds will go into pairing mode.
Note: Do not select “Forget this device” or you will have
to go through the pairing process again.
R
Quickly flashSlowly flash
L
6

Follow the steps below to pair and connect the earbuds
to your Bluetooth enabled device.
Connecting
1. The earbuds will automatically
be in Bluetooth pairing mode
when taken out of the case for
the first time.
2. After the earbuds link with each
other, the LED of the right earbud
will quickly flash RED while the
LED of the left earbud will slowly
flash WHITE indicating they are
in Bluetooth pairing mode.
3. Open your device’s Bluetooth
menu and find Brookstone
BKH600 and select it to pair.
4. Once paired, the voice prompt “Connected” will be
heard and the LEDs of both earbuds will slowly flash
WHITE.
Note: After taking the earbuds out of the case, they will
automatically link to each other and then try to connect
to a previously paired Bluetooth enabled device. If they
do not find a device to connect to, they will automatically
be in Bluetooth pairing mode.
Disconnecting
Open the Bluetooth settings on your device, and select
“Disconnect” to disconnect from an already connected
device. You'll hear a voice prompt "Disconnected" and
the earbuds will go into pairing mode.
Note: Do not select “Forget this device” or you will have
to go through the pairing process again.
Bluetooth Profiles:
A2DP V1.3, AVRCP V1.6
HFP V1.7, HSP V1.2
Earbud
Bluetooth menu
Brookstone BKH600
DEVICES
Bluetooth
i
7

Follow the steps below to pair and connect the earbuds
to your Bluetooth enabled device.
Connecting
1. The earbuds will automatically
be in Bluetooth pairing mode
when taken out of the case for
the first time.
2. After the earbuds link with each
other, the LED of the right earbud
will quickly flash RED while the
LED of the left earbud will slowly
flash WHITE indicating they are
in Bluetooth pairing mode.
3. Open your device’s Bluetooth
menu and find Brookstone
BKH600 and select it to pair.
4. Once paired, the voice prompt “Connected” will be
heard and the LEDs of both earbuds will slowly flash
WHITE.
Note: After taking the earbuds out of the case, they will
automatically link to each other and then try to connect
to a previously paired Bluetooth enabled device. If they
do not find a device to connect to, they will automatically
be in Bluetooth pairing mode.
Disconnecting
Open the Bluetooth settings on your device, and select
“Disconnect” to disconnect from an already connected
device. You'll hear a voice prompt "Disconnected" and
the earbuds will go into pairing mode.
Note: Do not select “Forget this device” or you will have
to go through the pairing process again.
Brookstone BKH600
DEVICES
Bluetooth
i
Disconnect
Forget this device
<
Bluetooth
8

You can use the Right earbud alone to make or answer
calls while the Left earbud is in the case but the Left earbud
cannot be used alone while the Right earbud is in the case.
USING ONE EARBUD
RL
Correct
Wrong
9