Brookstone Big blue studio User manual

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

ONE (1) YEAR LIMITED WARRANTY

Brookstone®warrants this product against defects in

materials and/or workmanship under normal use for a

period of ONE (1) YEAR from the date of purchase by

the original purchaser (“Warranty Period”). If a defect

arises and a valid claim is received within the Warranty

Period, at its option, Brookstone will either 1) repair

the defect at no charge, using new or refurbished

replacement parts, or 2) replace the product with a

new product that is at least functionally equivalent to

the original product, or 3) provide a store credit in the

amount of the purchase price of the original product. A

replacement product or part, including a user-installable

part installed in accordance with instructions provided

by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged,

any replacement item becomes your property and the

replaced item becomes Brookstone’s property. When a

store credit is given, the original product must be returned

to Brookstone and becomes Brookstone’s property.

Obtaining Service: To obtain warranty service, call

Brookstone Limited Warranty Service at 1-800-292-

9819. Please be prepared to describe the product that

needs service and the nature of the problem. A purchase

receipt is required. All repairs and replacements must be

authorized in advance. Service options, parts availability

and response times will vary. You are responsible for

delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement,

per our instructions.

Limits and Exclusions: Coverage under this Limited

Warranty is limited to the United States of America,

including the District of Columbia and the U.S. Territories

of Guam, Puerto Rico, and the U.S. Virgin Islands. This

Limited Warranty applies only to products manufactured

for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their

packaging. The Limited Warranty does not apply to any

non-Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own warranties

to the purchaser, but Brookstone, in so far as permitted

by law, provides these products “as is.” This warranty

does not apply to: a) damage caused by failure to follow

instructions relating to product’s use or the installation

of components; b) damage caused by accident, abuse,

misuse, fire, floods, earthquake or other external causes;

c) damage caused by service performed by anyone who

is not a representative of Brookstone; d) accessories

used in conjunction with a covered product; e) a product

or part that has been modified to alter functionality or

capability; f) items intended to be periodically replaced

by the purchaser during the normal life of the product

including, without limitation, batteries or light bulbs; g)

any product sold “as is” including, without limitation, floor

demonstration models and refurbished items; or h) a

product that is used commercially or for a commercial

purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT,

OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS

ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF

BROOKSTONE CANNOT LAWFULLY DISCLAIM

STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long an

implied warranty lasts, so the above exclusions or

limitations may not apply to you. This warranty gives you

specific legal rights and you may also have other rights,

which vary from state to state.

PAIRING WITH BLUETOOTH®

You can pair one or both earbuds with your Bluetooth®

device. If pairing both, the earbud that is turned on

first will be the main earbud; the second will be the

auxilliary earbud.

1. Prepare your device (e.g., smartphone) to pair using

Bluetooth®, making sure that the device is within

3 feet (1 meter) of the earbuds. Refer to your

device's owner’s manual for information on using

the Bluetooth®function.

2. With the earbuds powered off, press and hold the

Multi-Function Button of one earbud until the LED

Indicator quick flashes blue and red alternately,

indicating that the earbud is in pairing mode.

Optionally, turn on the second earbud; its LED

Indicator will flash blue when it is paired with the

main earbud.

3. On your device, search the list of available pairing

devices and select BBlue Bead Buds. Note that

it may take a few seconds for the earbuds to be

listed as an available device. Depending on your

device, you may have to tap SCAN to update the

device list. Consult your device's owner's manual.

If the connection is not made within 120 seconds,

pairing mode is cancelled.

4. If prompted, type the password or PIN 0000.

5. The earbud's LED Indicator will flash blue,

indicating that it is paried with the device.

The earbuds will remain paired with your device, even

after being turned off, until you cancel the pairing.

Consult your device's owner's manual for information

on cancelling pairing.

The Bluetooth®word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under

license.

Big Blue®is a registered trademark owned by Big Blue Audio LLC.

POSITIONING THE EARBUDSOPERATION

Perform the following on one or both earbuds. Ensure

that the earbuds are within 3 feet (1 meter) of your

device.

Function Multi-Function Key

Power on Long press until the LED Indicator

flashes red, then blinks blue when

reconnected with your mobile phone.

Ensure that your device is within 3 feet

(1 meter) of the earbuds.

Ensure that Bluetooth is enabled on

your device and it has been paired with

the earbuds. Tap BBlue Bead Buds in

your device's Bluetooth list if necessary

to reconnect.

Depending on whether you paired one

or both earbuds, one earbud may be the

main earbud and must be powered on

for the auxiliary earbud to play.

Power off Long press until the LED Indicator

blinks red once then turns off.

Play/pause Short press.

Next track Press twice.

Answer a

call

Short press when there is an incoming

call. Caller ID is available. Call quality

is enhanced with CVC6.0 noise

cancellation technology.

End a call Short press while in a call.

Reject a call Press twice when there is an incoming

call.

Insert the earbud

into the outer ear. Rotate the earbud

to gently insert it

into the ear.

CARE AND MAINTENANCE

Clean the earbuds with a soft cloth or damp chamois

leather. Never use solvents.

SPECIFICATIONS

Dimensions, Case....................................Approx. 1.8 x 1.3 x 1.4 in.

(46 x 34 x 35 mm)

Dimensions, Earbuds............................Approx. 0.9 x 0.8 x 0.5 in.

(24 x 20 x 13 mm)

Weight, Earbuds........................................................Approx. .28 oz (8g)

Weight, Earbuds and Case ........................Approx. .88 oz (25 g)

Bluetooth Version Compatibility..........................................................4.2

Bluetooth Transmission Range......................Up to 33 ft (10 m)

Battery........................................................................260mAh Lithium -Ion

Battery Capacity.............................................................50mAh (earbud)

300mAh (charging case)

Battery Life.....................................Up to 2.5 hours (both earbuds)

Up to 5 hours (one earbud)

Standby Time.................................Up to 60 hours (both earbuds)

Up to 120 hours (one earbud)

Charging Time, Case....................................................Approx. 2 hours

Charging Time, Both Earbuds...................Approx. 1 to 2 hours

TROUBLESHOOTING

Bluetooth®pairing is unsuccessful.

Check that the earbuds are in pairing mode (red and

blue flashing), that the device's Bluetooth mode is

enabled, and that the device is within 3 feet (1 meter)

of the earbuds.

The earbuds are not paired with each other.

Turn off both earbuds, then turn them both on at the

same time by long pressing the Multi-Funciton Button

for more than 8 seconds. The LED indicators will flash

red and blue, then will flash blue when the earbuds

are paired with each other. Pair with your Bluetooth®

device.

The earbuds do not turn on.

Check that the battery is not depleted.

The earbuds disconnect from the device.

Ensure that no objects are interfering with the

connection. Ensure that the earbuds are within 33

feet (10 meters) of your device.

There is no sound.

Check the volume on your device and check that

Bluetooth®is enabled and supports the A2DP profile.

NOTE: Your device's app settings may prohibit control

of some apps by the earbuds.

324326 •324328 •324329

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Find thousands more

great ideas online

Big Blue®True Wireless

Earbuds

CAUTION

• Listening to audio at a high volume may affect your

hearing.

• For adult use only.

• Prolonged use may cause discomfort. If you

experience discomfort, remove the earbuds

• Do not drop, crush, bend or apply excessive force to

the device.

• Do not expose the device to moisture, extreme or

prolonged heat, cold, humidity, or other adverse

conditions. Avoid storage in damp, humid or wet

locations.

• The unit can only be opened by qualified personnel.

LITHIUM-ION BATTERY WARNING

This device contains a rechargeable Lithium-Ion

battery. The battery must be recycled or disposed of

properly. Contact your local waste management office

for information on battery recycling or disposal.

Use only the supplied cable to recharge the battery.

Improper charging may damage the battery and the

device.

Do not attempt to open the rechargeable battery or

battery pack. There are no serviceable parts inside.

Keep the battery out of reach of children. If swallowed,

consult a physician immediately.

Do not dispose of battery in a fire as it may explode.

Battery may also explode if damaged. BC

FCC INFORMATION

Caution: Changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B Digital Device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

WARNING: To comply with FCC's RF radiation

exposure limits for general population/uncontrolled

exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least

20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

This equipment complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference

received, including interference

that may cause undesired operation.

FCC ID: 2AKU9IP010

LOCATION OF PARTS AND

CONTROLS

5. Charging Pins

6. Earbud Charging Indicator

7. Micro-USB Port

8. Case Charging Indicator

9. Earbud Charging Button

1. Charging Contact Points

2. Microphone

3. LED Indicator

4. Multi-Function Button

CHARGING THE CASE AND

EARBUDS

Charge the case and earbuds before first use. If

not used for a long period of time, they may require

recharging.

To charge the case:

1. Plug the charging cable's USB connector into a

USB port on an active device, such as a laptop or

USB adapter.

2. Plug the charging cable's Micro USB connector

into the Micro-USB port on the case. The Case

Charging Indicator turns red during charging. The

indicator turns off when the case is fully charged.

3. When charging is complete, unplug the charging

cable.

You can charge the earbuds while the case is charging

or after the case is charged.

To charge the earbuds:

1. Place the earbuds into the charging case. When

properly inserted, the charging pins align with the

charging contact points.

2. Place the magnetic cover on the case.

3. Press the Earbud Charging Button on the bottom

of the case. The blue Earbud Charging Indicator

turns on. The earbuds' LED Indicators are red while

charging. They turn blue when fully charged.

4. When charging is complete, press the Earbud

Charging Button to end charging. The blue Earbud

Charging Indicator turns off.

Other manuals for BIG BLUE STUDIO

Table of contents

Other Brookstone Headphones manuals

Brookstone

Brookstone BIG BLUE STUDIO User manual

Brookstone

Brookstone airphones BKH650 User manual

Brookstone

Brookstone Noise Cancelling Compact Headphones User manual

Brookstone

Brookstone Bluetooth Wireless Headphones User manual

Brookstone

Brookstone AR127A1WHA User manual

Brookstone

Brookstone iDesign Power Speaker User manual

Brookstone

Brookstone airphones BKH600 User manual

Brookstone

Brookstone CLEAR User manual

Brookstone

Brookstone 306612 User manual

Brookstone

Brookstone YU-RF8131 User manual

Brookstone

Brookstone 683417 User manual

Brookstone

Brookstone 320610 User manual

Brookstone

Brookstone ISOLATENX User manual

Brookstone

Brookstone Wireless TV Headphones User manual

Brookstone

Brookstone AR102A4BKA User manual

Brookstone

Brookstone 324395 User manual

Brookstone

Brookstone Panda User manual

Brookstone

Brookstone ELITETOUCH BSTWS23 User manual

Brookstone

Brookstone 321964 User manual

Brookstone

Brookstone 322348 User manual

Brookstone

Brookstone Devil User manual

Brookstone

Brookstone 990635p User manual

Brookstone

Brookstone TOUCHPRO BSTWS22 User manual

Brookstone

Brookstone Wireless Cat Ear Headphones User manual

Popular Headphones manuals by other brands

Shure

Shure RMCE-BT2 Quick start quide

Sennheiser

Sennheiser HD 1000 manual

LTB Audio Systems

LTB Audio Systems MG-AC97 Quick installation guide

GOVO

GOVO GOBOLD 410 manual

Logitech

Logitech FITS Setup guide

Cowon

Cowon CM2 user manual

Philips

Philips SHC1300/00 Declaration of conformity

LG HBS-730 user manual

Philips

Philips SHN5200/28 quick start guide

Koss

Koss R50B operating instructions

Streetz

Streetz TWS-112 manual

nedis

nedis HPBT2261BK quick start guide

Huawei

Huawei T0012 quick start guide

Harman

Harman JBL WAVE300TWS quick start guide

Sony

Sony WF-1000XM3 Faq

Urbanista

Urbanista Boston manual

JBL

JBL ROCK OVER-EAR quick start guide

Sven

Sven AP-G988MV user manual