Brookstone Renew User manual

RenewTM
Massage Chair

Congratulations and thank you for trusting Brookstone. You're about
to discover the many joys of owning a premium Brookstone RenewTM
Massage Chair. Massage, combined with healthy eating, exercise and
a good sleep regimen, is a great way to take care of your body & mind,
leading to a happy, productive lifestyle.
For 50 years, Brookstone has been the trusted source for quality
products, that improve your life. This Brookstone RenewTM Massage
Chair represents our heritage of delivering amazing, quality products
since 1965. It is covered by a 2 year, parts and labor, limited warranty.
Take comfort in knowing our quality engineering team goes the extra
mile every day, to make sure our customers rarely need it.
We believe you are going to love this chair. If so, please tell others
how it’s changed your life. If we have somehow let you down, please
tell us directly. Continuous feedback from our customers, either
loving products or helping us to improve them, is critical to
Brookstone’s success for the next 50 years.
To communicate directly with us, please contact the Brookstone
Customer Care Center at 1-866-336-3199. Representatives are
available Monday through Friday from 8:00 A.M. to 10:00 P.M.
(Central Time), as well as, Saturday and Sunday from 9:00 A.M. to
5:30 P.M. (Central Time). You could also email us, anytime, at
[email protected]
Sincerely yours,
The Brookstone Product Development Team
RenewTM
Massage Chair

TABLE OF CONTENTS
Cautions and warnings …………………………………………………………… 2
Names of parts and functions …………………………………………………… 7
Preparation before use ……………………………………………………………11
Massage programs and selections ……………………………………………… 16
Product care and storage ………………………………………………………… 20
Troubleshooting ……………………………………………………………………21
Specifications ………………………………………………………………………22
Warranty ……………………………………………………………………………24
Before you start using your Brookstone RenewTM Massage Chair,
please read the operation manual thoroughly for the correct methods
of usage, especially taking note of the section on safety.
This manual should be kept on hand for easy reference. It is your
guide to safe and efficient operation.
1

IMPORTANT SAFETY INSTRUCTIONS
When using the Brookstone RenewTM Massage Chair, basic precautions should
always be followed, including the following: Read all instructions before using the
Brookstone RenewTM Massage Chair.
1. Always unplug this Brookstone RenewTM Massage Chair from the electrical
outlet immediately after using and before cleaning.
2. Never use pins or other metallic fasteners with this appliance.
3. Carefully examine the covering before each use. Call for service if the
covering shows any sign of deterioration, such as blistering, peeling or
cracking.
4. Keep dry – Do not operate in a wet or moist condition.
1. A Brookstone RenewTM Massage Chair should never be left unattended when
plugged in. Unplug from the outlet when it is not in use and before putting on
or taking off parts.
2. Close supervision is necessary when this Brookstone RenewTM Massage Chair
is used by or near children or disabled persons. Keep children away from
reclining backrest and extended leg rest.
3. Use this Brookstone RenewTM Massage Chair only for its intended use as
described in this manual. Do not use attachments not recommended by the
manufacturer.
4. Never operate this Brookstone RenewTM Massage Chair if it has a damaged
cord or plug, if it is not working properly, if it has been dropped or damaged,
or dropped into water. Contact Brookstone Customer Service at
866-336-3199.
5. Do not carry this Brookstone RenewTM Massage Chair by the power cord or
use cord as a handle.
6. Keep the cord away from heated surfaces
7. Never operate the Brookstone RenewTM Massage Chair with the air openings
blocked. Keep the air openings free of lint, hair and the like.
8. Never drop or insert any object into any opening.
9. Do not use outdoors.
10. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
11. To disconnect, turn all controls to the off position, then remove the plug
from the outlet.
12. Do not stand on or in the Brookstone RenewTM Massage Chair. Use only
while seated.
13. The product is not intended for use by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the product by a person responsible for their safety.
WARNING – To reduce the risk of burns, fire, electric shock or injury to persons:
READ ALL INSTRUCTIONS BEFORE USING.
DANGER – To reduce the risk of electric shock:
2

14. Children should be supervised to ensure that they do not play with the
product.
15. Use heated services carefully. May cause serious burns. Do no use over
sensitive skin areas or in the presence of poor circulation. The unattended
use of heat by children or disabled persons may be dangerous.
16. Temperatures sufficiently high to cause burns may occur regardless of the
control setting. Do not use on an infant or invalid or on a sleeping or
unconscious person. Check the skin in contact with the heated area of the
appliance frequently to reduce the risk of blistering.
17. Burns may result from improper use.
18. Do not crush – avoid sharp folds.
19. Keep children away from extended foot support (or other similar parts).
20. DO NOT WET – DO NOT USE PINS.
21. NEVER REMOVE COVER.
22. Connect this appliance to a properly grounded outlet only. See Grounding
instructions.
1. Usage Environment
•Do not use the Brookstone RenewTM Massage Chair in an excessively humid
or dusty environment as this may result in malfunction or electric shock.
• Do not use the Brookstone RenewTM Massage Chair in a room with a
temperature of 104° F or higher.
• Do not expose the Brookstone RenewTM Massage Chair to heaters, stoves or
direct sunlight.
• Place and use the Brookstone RenewTM Massage Chair on an even,
non-slip floor.
• The Brookstone RenewTM Massage Chair is designed for home use and not
for commercial purposes.
SAVE THESE INSTRUCTIONS
This Brookstone RenewTM Massage Chair is intended for household use only.
Caution
• The Brookstone RenewTM Massage Chair is to be used indoors only.
• If you use the Brookstone RenewTM Massage Chair in a cold room, do
not increase the room temperature abruptly. It is recommended that
you increase the temperature gradually to a normal level.
•If the Brookstone RenewTM Massage Chair is stored in a cold place
and is being brought into a warm environment, it is advisable to wait
one hour before use. This is because its performance may not be at
optimum level, as there may be water droplets on the mechanical parts
due to condensation. Using the Brookstone RenewTM Massage Chair
under such conditions may result in malfunction.
IMPORTANT SAFETY INSTRUCTIONS (continued)
3

2. Safety Precautions
Safety
• To ensure safe and correct use of the Brookstone RenewTM Massage Chair, do
not operate it without reading this operation manual carefully.
• Do not use the Brookstone RenewTM Massage Chair when the upholstery or
seat is removed. This may cause injury or malfunction.
• Do not use the Brookstone RenewTM Massage Chair in combination with other
therapeutic equipment or electric blanket, etc., as this may result in
ineffectiveness or injury.
• Do not use the Brookstone RenewTM Massage Chair an hour before or after
eating as this may have adverse effects on the user.
• Do not allow children or pets to play around the Brookstone RenewTM Massage
Chair, e.g., behind the backrest, under the seat or leg rest of the Brookstone
RenewTM Massage Chair. This may result in injury.
• Do not rest or place heavy objects on the armrests, leg rest or backrest as this
may result in malfunction or injury.
•Do not use the Brookstone RenewTM Massage Chair when your body is wet.
• Do not operate the Brookstone RenewTM Massage Chair with wet hands.
•It is not recommended to use the massage for more than 20 minutes.
•Do not perform continuous massage on the same spot of your body for more
than 5 minutes at a time as this may result in excessive stimulation and may
have adverse effects.
•Do not insert your hand or foot along the paths of the massage rollers during
use as this may cause injury.
• Stop operation immediately if you experience any discomfort.
• This product is not intended for self-treatment of conditions that should be
managed by a qualified health care provider.
• People on medication or with medical conditions, please consult your doctor
before use. Please do not use the product if you are not feeling well.
• Remove all scarves, neckties, necklaces and jewelry before using the massager.
3. People with Medical conditions
Consult your doctor before use if you:
• are under medical rest as ordered by a doctor.
• have spinal disorders, an abnormal spinal condition or have suffered a spinal
injury.
• have back problems
• have diabetes, osteoporosis or sensory impairment
• have joint dysfunction.
• have a pacemaker or other electronic medical devices.
• may be pregnant.
• have phlebitis or thrombosis.
• have an increased risk for blood clots.
• had recent surgery.
• have surgical pins, screw, or anything mechanical implanted in your body. 4

Safety
Caution
• The Brookstone RenewTM Massage Chair is not intended for use by children or
persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the Brookstone RenewTM Massage Chair by a
person responsible for their safety.
•Children should be supervised to ensure that they do not play with the
Brookstone RenewTM Massage Chair.
• Avoid using the Brookstone RenewTM Massage Chair under the influence of
alcohol.
•Do not apply massage rollers directly on the head, elbow or knee joints, torso
or abdomen.
• If your legs or feet slip off the leg rest during massage, do not force them
back in as this may result in injury.
• Remove the power plug from the electrical outlet immediately should liquid
be accidentally spilled onto the Brookstone RenewTM Massage Chair. Do not
use wet hands to connect or disconnect the power plug from the electrical
outlet.
• Do not tamper with the power cord or use the Brookstone RenewTM Massage
Chair with a damaged cord asthis may result in malfunction and electric shock.
In the following events, please switch off the main power switch immediately and
disconnect the power cord from the electrical outlet:
• If water is accidentally spilled onto the Brookstone RenewTM Massage Chair.
This may result in electric shock or malfunction
•If the fabric of the backrest is torn and the internal components are exposed.
• If pain or discomfort is felt during massage, stop operation immediately and
consult your doctor.
• If you detect any malfunction or any other abnormal condition during operation.
• If there is a power failure. Injury may occur when power is restored
unexpectedly.
• If there is lightning.
4. Instances when the Brookstone RenewTM Massage Chair should not
be used
5. Assembly and repair of the Brookstone RenewTM Massage Chair
• Do not disassemble the backrest cover of the Brookstone RenewTM Massage
Chair. Touching the internal components may result in malfunction or electric
shock.
• The Brookstone RenewTM Massage Chair must only be professionally serviced
or repaired. Do not attempt to disassemble or repair the Brookstone RenewTM
Massage Chair yourself.
5

This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for the electric current to reduce
the risk of electric shock. This product is equipped with a cord or an equipment-
grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or service
technician if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product – if it will not fit the outlet, have a
proper outlet installed by a qualified technician.
This product is for use on a nominal 120V circuit and has a grounding plug that
looks like the plug illustrated below. Make sure the product is connected to an
outlet having the same configuration as the plug. No adapter should be used
with this product.
• Check that the Alternating Current (AC) voltage corresponds with the
specification indicated for the Brookstone RenewTM Massage Chair.
• Do not connect or disconnect the power plug from the electrical outlet with
wet hands. This may result in malfunction or electric shock.
• When disconnecting the power plug, pull it by holding the plug, not the cord.
• Although operation will be stopped automatically by the Auto-Timer function,
always remember to switch off the main power switch after use.
• Do not place the power cord under the Brookstone RenewTM Massage Chair
or any other heavy objects.
•Do not wind the power cord around the Brookstone RenewTM Massage Chair
as this may damage the cord and result in a fire or electric shock.
•Do not operate the Brookstone RenewTM Massage Chair with a damaged cord
or extension cord.
• Do not use the Brookstone RenewTM Massage Chair if the electrical outlet is
loose.
•If the power cord is damaged, it should be replaced by a qualified technician.
Safety
6.Things to note about the power plug and cord
7.Grounding instructions
6

Names of parts and functions
1. Head pillow
2. Shoulder massage unit
3. Backrest cushion
4. Backrest cushion layer
5. Wheels
6. Legrest
7. Footrest
8. Seat cushion
9. Seat cushion layer
10. Remote control holder
11. Arm airbags
12. Backrest
13. Controller interface
14. Power switch
15. Fuse
16. Power inlet
2 11
10
9
567
1
4
3
8
12
13
14
15
16
7

Names of parts and functions
Controller
Power Button
Press once to Power On and
press again to Power Off
Heat Button
To turn the Lumbar
Heat feature on or off
Pause Button
To temporarily pause
the massage.
Speed Button
To increase the back
roller speed
Target Button
To stop the back massage
in a specific spot while
rollers travel up down back
Width Button
To adjust roller width coverage.
(Not available in Kneading mode)
Zone Button
To adjust back coverage area.
Refer to Page 18 for details
Airbag zone/Air bag
intensity button
To adjust air massage
location and aircell intensity
Adjust Button
Moves the back rollers to
the desired position
Timer Button
Each press will add 5 minutes
to the default time of the
running program – up to 15
minutes additional time
Quick Session Button
To run a 6 minute (approx.)
program
Zero Gravity Button
To move the chair into the Zero
Gravity position
Auto Program Buttons
Refer to Page 16 for details
Custom Massage Button
To choose one of 5 back
massage techniques.
(Can not be combined with
auto programs)
Chair Recline Button
Manually recline chair or return
chair upright.
Footrest Button
Moves the footrest up and down
8

Names of parts and functions
Controller (LCD Display)
1. Power on light – indicates chair is ready to use
2. Indicates chair is performing scan before massage begins
3. Indicates chair is ready to begin selected massage program
4. Massage is in Idle Mode
5. Indicates backrest and/or legrest are moving
6. Displays which massage type is being used. From top to bottom, Kneading,
Tapping, Kneading with Tapping, Shiatsu, Rolling
7. Depicts the direction the rollers are moving – up or down
8. One to three bars shows the massage speed level selected
9. Shows the air intensity level – Low, Medium, High
10. Shows massage roller width – Narrow, Medium, Wide
11. Indicates heat function is operating
12. Displays the location of the massage rollers and active air bags
13. Displays the remaining time of the current massage program
12 3 4
5
6
7
13
12
11
10 9 8
9

10
Caution for damage prevention
•Do not sit, step or place heavy objects on the controller
• Do not drop the controller. It is recommended that the controller unit
be placed in the remote control holder when not in use
• Do not exert excessive force on the controller
• Do not handle the controller with wet hands
• Do not operate the controller using sharp-edged or hard objects.
It may result in damage.
Caution

Preparation before use
• Do not move the Brookstone RenewTM Massage Chair when there
is someone sitting on it. This will cause the Brookstone RenewTM
Massage Chair to tip over resulting in accident and injuries.
Use 2 people to move the chair safely.
• Hold the back of the Brookstone
RenewTM Massage Chair and recline
the chair to approximately a 45°
angle.
• Roll it to the desired location, using
the casters on the bottom of the chair.
• Gently place the chair on the floor.
Moving the Brookstone RenewTM
Massage Chair
Caution
11

Setting up the Brookstone RenewTM
Massage Chair
Backrest cushion layer
Preparation before use
Removable Backrest cushion layer is
provided to help you achieve the
massage intensity you want.
• If you feel the massage is too light,
remove the Backrest cushion layer.
• If you feel the massage is too strong,
insert the Backrest cushion layer.
• Brookstone RenewTM Massage
Chair is shipped with the backrest
reclined.
• Before use, ensure that the backrest
is raised fully to it’s upright position
• Pull up the zipper to connect
backrest and cushion.
• Find Backrest cushion layer on
inside of backrest cushion.
Adjusting Shoulder Height
Shoulder position is adjustable
according to your height.
Adjust the position, up or down, in
small increments. NOTE: Be careful
not to exert too much pressure or it
could damage the chair.
Adjusting the Head Pillow
To increase intensity, the headrest can
be removed, as shown. NOTE:
Pillow is attached using Velcro and
can be easily removed.
To access Backrest Cushion Layer
Removable Seat Cushion Layer is
available to help you to get the
massage intensity you want.
• If you feel the massage is too light,
remove the Seat Cushion Layer
• If you feel the massage is too strong,
reattach the Seat Cushion Layer
Seat Cushion Layer
Cushion pad
Velcro
Backrest
Backrest pad
12

Positioning the Brookstone RenewTM
Massage Chair
Power On/Off
Checking the backrest pad
Preparation before use
• Ensure that there is an allowance of
more than 31” behind the massage
chair and more than 31” in front of
the Brookstone RenewTM Massage
Chair to allow the backrest to recline
and the leg rest to extend without
obstruction during operation.
Caution
• It is recommended that a carpet be
placed under the Brookstone RenewTM
Massage Chair to prevent scratching
the floor and to reduce noise level
during operation.
• As the Brookstone RenewTM Massage
Chair is heavy, please exercise extra
care not to damage the floor when
positioning it.
• Maintain a minimum distance of 3
feet from AV devices, such as a TV
or radio, to prevent signal
interference.
• Use the Brookstone RenewTM Massage
Chair only when it is placed on an
even, flat surface.
• Connect the power plug to the
electrical outlet. In the back of the
chair. Plug the power and into a
standand 110v electrical outlet.
• Turn on/off the main power switch,
located at the back of the Brookstone
RenewTM Massage Chair to power the
chair on / off.
• Ensure the power cord is not placed
under the Brookstone RenewTM
Massage Chair.
• Ensure all switches are turned “OFF”
(including the main power switch)
before connecting the power plug to
an electrical outlet.
• Always check to ensure that there are
no holes or tears on the backrest pad.
Stop using the Brookstone RenewTM
Massage Chair immediately if you find
even the slightest tear. Unplug the
Brookstone RenewTM Massage Chair
and contact Brookstone Customer
Service at 866-336-3199.
• Lift the backrest upholstery to ensure
that there are no holes or tears on the
backrest pad.
31.5''
31.5''
Caution
Caution
Caution
13

Sitting on the Brookstone RenewTM
Massage Chair
How to recline the backrest
Raising and lowering the foot rest
Foot rest extension and retraction
To use the heat function
Preparation before use
• The rollers are usually stored in the
upper part of the backrest. This
position is known as the “storage
position”.
• If the rollers are not in the storage
position, simply reset by pressing
the power button on the controller
before sitting on the massage
chair.
• Do not sit down on the chair with
the leg rest raised. Any sudden
heavy weight on the leg rest could
cause damage to the mechanism,
or it may result in accident or injury
if the chair tips over.
• Ensure that the backrest returns to
the upright position before sitting
on the chair, then recline it to your
preference.
• To raise the backrest, push and
hold the ▲(Incline button) until the
backrest is at your desired angle.
•To recline the backrest, push and
hold the ▼(Recline button) until the
backrest is at your desired angle.
The foot rest can be raised independently
for additional benefit.
•To raise the foot rest, press and hold
the foot rest button ▲until the foot
rest is at the desired angle.
•To lower the foot rest, press and hold
the foot rest button ▼until the foot
rest is at the desired angle.
• Raise the foot until your feet are
placed at a natural position.
• Stretch your feet to a comfortable
position. The foot rest will retract
or extend and stop at an
appropriate position.
• Press heat button to turn on / off
the lumbar heat function.
One touch to Zero Gravity
•Simply press the Zero Gravity
button once, to recline to Zero
Gravity position.
Caution
14

CAUTION
Preparation before use
•When adjusting the backrest and footrest,
always ensure there is no object under
the footrest / seat and keep children or
pets away to prevent injury.
•Do not sit on the Brookstone RenewTM
Massage Chair with the footrest raised.
Any sudden heavy weight on the footrest
could cause damage to the mechanism,
accident and injury if the Brookstone
RenewTM Massage Chair tips over.
•Ensure that the backrest returns to its
most upright position before sitting on
the Brookstone RenewTM Massage Chair
and reclining it according to your
preference.
•Do not place fingers or objects in the
gap between the seat and the backrest /
footrest.
•Ensure that there is no obstruction when
adjusting the angle of the backrest /
footrest.
• Do not place fingers or objects in
the gap between the seat and the
back rest / leg rest.
• Remove shoes when using chair.
• Do not stand on leg rest unit when
it is elevated.
• ALWAYS retract the leg rest unit to
its original position after use.
CAUTION
CAUTION
• Please refrain from putting hands
and arms in between the back rest
and side frame mechanism to
prevent injury when the back rest
rises.
Keep hands and legs
away from the gap.
Caution Caution
15

Note
Automatic massage programs
Massage programs and selections
You may select any automatic
massage program that best suits
your needs by pressing the
respective automatic program
button on the controller.
• Keep each massage session to no
longer than 20 minutes.
•Do not massage any particular area
of the body for more than 5 minutes.
Press Power button to switch on the controller.
Brookstone RenewTM Massage Chair will recline to its”
Ready” position and the LCD on the controller will light
up. If no selection is made after 3 minutes, the chair
will go into idle mode and the LCD light will go off.
(Ready position: Leg rest will raise slightly and backrest
will recline slightly)
The massage program begins once scanning is
complete.
You can adjust your desired shoulder position by
pressing the ▲or ▼button, within 5 seconds after
scanning is complete
The massage progress is shown on the LCD display.
After the massage is complete, the rollers will return to
their storage position and the chair will return to the
Ready position.
NOTE: Display will go to “Idle” after 3 minutes. Press
any button once to wake it up. Pressing again activates
the command of that button.
Select any of the 8 automatic programs.
Full Body – Head to toes, various massage techniques
in varying intensities to help improve your all-over
felling.(15mins)
Stress Relief – Focuses on Neck, Shoulder and Feet
where stress tends to manifest. (15mins)
Back Relief – Focuses on lower back with side to side
movement and stretching to help relax your back.
(15mins)
Renew – Uses aggressive tapping & rolling to help
blood circulation and help boost energy. (15mins)
Stretch – Uses air cells and stretching to help with
muscle recovery. (20mins)
All Air – 42 Air cells help to improve circulation (no
rolling).(20mins)
Soothe – Combination of Air, Shiatsu, Rolling, Kneading
& Rocking motion for a more gentle massage. (20mins)
Sleep – Slower massage with Rolling & Kneading (no
Tapping) combined with air cells to help relax your body
and make sleep easier. (20mins)
16

Custom massage
Massage programs and selections
Press Power button to switch on the controller.
Brookstone RenewTM Massage Chair will recline to its
ready position and the LCD on the controller will light
up. If no selection is made after 3 minutes, the chair will
go into idle mode and the LCD light will go off.
There are 5 types of custom back massage. Select the
custom massage button:
Once for Kneading
Twice for Tapping
3 times for Kneading with Tapping
4 times for Shiatsu
5 times for Rolling
Massage type will illuminate in the LCD screen.
Chair Recline
Select ▲ or ▼ to adjust the recline position of the chair
manually.
Foot Rest
Select ▲ or ▼ to adjust the foot rest independently
Adjust
Select ▲ or ▼ to move the back rollers to your desired
position, or changes the roller direction.
Airbag Zone
Use to select where you would like the airbags to
massage. Each press of the button will show the
corresponding location on the LCD screen.
Note
You may select and combine your favorite massage areas by pressing the respective
custom area massage buttons.
• Keep each massage session to no
longer than 20 minutes.
• Do not massage any particular area
of the body for more than 5 minutes.
Airbag Intensity
Allows you to adjust the intensity of the Airbag massage.
Each press of the button will change the intensity level :
One bar=Low; Two bars=Medium; Three bars=High
17

Massage programs and selections
Zone button
Adjusts what areas you want to focus your massage.
Each press cycles through Back, Waist, Seat, Back &
Waist, Waist & Seat and Whole Body.
Width button
Press to adjust massage roller widths. Repeated
pressing will cycle through Narrow, Medium and Wide.
This function is not available in Kneading mode.
Pause button
Will temporarily pause all massage and pause functions.
Rollers will not return to their storage position. To
resume press Pause button again.
Zero Gravity button
This will recline the chair automatically to a Zero Gravity
position a second press will return chair to Ready
position.
Adjusting automatic programs, localized area programs or manual program settings
Target button
Targets a particular area for the rollers to focus on and
remain. Location will be shown on the LCD screen.
Speed button
Press to increase the speed of the massage rollers.
Each press will cycle through:
One bar = Slow; Two bars = Medium; Three bars = Fast
Timer button
Each press will add 5 minutes to your selected program
time. Up to a maximum of 15 additional minutes.
18