BrookVent aircycle ONE+ 100 Mounting instructions

brookvent.co.uk
Installation, maintenance & user manual
Applicable to the following Aircycle ONE+ models:
PRODUCT CODE DESCRIPTION
AF 90-CYC-ONEP-100 aircycle ONE+ 100
AF 90-CYC-ONEP-150 aircycle ONE+ 150
single room heat recovery
with remote controller

1/21
CONTENTS
PLEASE KEEP THESE INSTRUCTIONS WITH THE PRODUCT.
Please read this manual fully prior to installing the MVHR unit.
1.0 Introduction ........................................................................................................................2
1.1 Model Variations.................................................................................................................2
1.2 Product Guarantee..............................................................................................................3
2.0 Safety ..................................................................................................................................3
2.1 Technical specifications ......................................................................................................4
2.2 Responsibility of the Installer..............................................................................................5
2.3 Responsibility of the Occupant ...........................................................................................5
3.0 Specifications/ Dimensions.................................................................................................6
3.2 Detailed Specification .........................................................................................................6
3.3 ErP Directive - Regulations 1253/2014 - 1254/2014 ..........................................................7
4.0 Operation............................................................................................................................8
4.1 Remote functions................................................................................................................8
4.2 Alerts and solutions ..........................................................................................................10
4.3 Disposal and recycling.......................................................................................................10
5.0 Installation and figures......................................................................................................11
Notes.............................................................................................................................................19
Customer Support.........................................................................................................................21

2/21
IMPORTANT
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
1.0 Introduction
A continuous running, low energy, ultra-quiet, alternate flow supply and extract fan with
heat retention for use in habitable areas such as living rooms, bedrooms, dining rooms,
basements and hallways.
The unit provides ventilation and reduces indoor air pollutants and humidity levels. The
unit is ideal for tackling problems associated with condensation dampness such as mould
growth.
It is recommended that two units are installed in pair: when one unit is pulling, the other
is pushing.
Pair of units can be installed in the same room or in different rooms (i.e. livingroom and
bedroom). The unit is suitable for installation on an outside wall.
The unit should operate continuously, and only be stopped for maintenance or service.
When heat exchange is not useful (for example in mid-seasons when indoor and outdoor
temperatures are similar), or when heat exchange is not recommended (for example with
the option “summer free cooling”), it is recommended to set the unit in “extract-only” or
“intake-only” mode and NOT to switch it off.
1.1 Model Variations
PRODUCT CODE DESCRIPTION
AF 90-CYC-ONEP-100 aircycle ONE+ 100
AF 90-CYC-ONEP-150 aircycle ONE+ 150

3/21
1.2 Product Guarantee
This product is guaranteed against defects for a period of 2 years from date of purchase
with the first year covering parts and labour and the remaining year covering parts only.
In the instance of a defect, Brookvent may repair the product, replace the product free of
charge or refund the cost of the product at Brookvent’s own discretion. In terms of
installation, operation and maintenance please follow all instructions provided. If this
product has been misused, not properly maintained or handled carelessly it may lead to
this guarantee being declared void.
Brookvent does not accept liability for damage caused by non-observance of the
installation instructions. Service activities must be carried out by Brookvent or by
competent installers using original Brookvent parts. This guarantee does not affect your
statutory right as a consumer.
Brookvent operate a policy of continuous innovation and improvement and thus reserve
the right to alter product specifications and appearances without notice.
2.0 Safety
The following information must be read carefully to ensure safe installation and
operation of the unit.
✓The device should not be used for applications other than those specified in this
manual.
✓After removing the product from its packaging, verify its condition. In case of
doubt, contact a qualified technician. Do not leave packaging within the reach of
small children or people with disabilities.
✓Do not touch the appliance with wet or damp hands/feet.
✓This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
✓Do not use the product in the presence of inflammable vapours, such as alcohol,
insecticides, gasoline, etc.
✓If any abnormalities in operation are detected, disconnect the device from the
mains supply and contact a qualified technician immediately. Use original spare
parts only for repairs.
✓The electrical system to which the device is connected must comply with
regulations.
✓Before connecting the product to the power supply or the power outlet, ensure
that:

4/21
❖the data plate (voltage and frequency) correspond to those of the electrical
mains
❖the electrical power supply/socket is adequate for maximum device
power. If not, contact a qualified technician.
✓The device should not be used as an activator for water heaters, stoves, etc., nor
should it discharge into hot air/fume vent ducts deriving from any type of
combustion unit. It must expel air outside via its own special duct.
✓Operating temperature: -20°C up to +50°C.
✓The device is designed to extract clean air only, i.e. without grease, soot, chemical
or corrosive agents, or flammable or explosive mixtures.
✓Do not leave the device exposed to atmospheric agents (rain, sun, snow, etc.).
✓Do not immerse the device or its parts in water or other liquids.
✓Turn off the main switch whenever a malfunction is detected or when cleaning.
✓For installation an omnipolar switch should be incorporated in the fixed wiring, in
accordance with the wiring regulations, to provide a full disconnection under
overvoltage category III conditions (contact opening distance equal to or greater
than 3mm).
✓If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
✓Do not obstruct the fan or exhaust grille to ensure optimum air passage.
✓Ensure adequate air return/discharge into/from the room in compliance with
existing regulations in order to ensure proper device operation.
✓If the environment in which the product is installed also houses a fuel-operating
device (water heater, methane stove etc., that is not a “sealed chamber” type), it is
essential to ensure adequate air intake, to ensure good combustion and proper
equipment operation.
✓contact with the Test Finger (test probe “B” of the norm EN61032) in compliance
with the current safety regulations.
2.1 Technical specifications
✓Front cover (A) removable for cleaning without the use of tools.
✓Inner ventilation unit (B) and wall support base (D) made of high quality, impact
and UV-resistant ABS, colour RAL 9010.
✓Integrated multi-colour led (C) to obtain a visual feedback of the unit status.
✓Smart humidity control.
✓Integral temperature sensor for the automatic management of the inversion time
(comfort mode).
✓Automatic anti-frost protection to prevent frost building up on the heat exchanger.
✓Wall support base (D) provided with a magnet “coupling/uncoupling” system which
allows the ventilation unit to be removed from its base during maintenance.
✓Back-up touch button (E) at the side of the ventilation unit.
✓Unique design winglet-type impeller, providing enhanced aerodynamic
properties, low noise and increased efficiency.
✓Highly efficient reversible EC motor with integral thermal protection, mounted on
sealed for life high quality ball bearings. Designed for continuous reversible
running.

5/21
✓Telescopic pipe (F) adaptable to the wall thickness.
✓Anti-mortar cap designed to be used also as template during the installation of the
wall support base.
✓Regenerative heat exchanger with ceramic core (G) with high thermal efficiency,
equipped with washable anti-dust filters (H).
✓External grille (I) made of high quality, impact and UV-resistant ABS, colour RAL
9010, with anti-insect net and water drip guard.
✓Infra-red remote controller with touch technology, LCD display and wall base
supplied as standard. Made from ABS, RAL 9010.
✓The unit is double insulated: no earth connection is required.
✓No need of condensation drainage system.
✓IPX4 degree of protection.
✓Power supply 220-240V~ 50Hz
2.2 Responsibility of the Installer
✓Correct Installation, balancing and commissioning of the unit.
✓Compliance to requirements and local additional rules.
✓Explanation of the ventilation system to the user.
✓Warning for the user, to check or replace the air filters on time.
2.3 Responsibility of the Occupant
✓To ensure maintenance of the ventilation unit on a regular basis. Filters should
be checked, cleaned or replace every 6 months. Details can be found on page
17 (maintenance).
✓To ensure that the fan is operating. The aircycle ONE+ ventilation units are
designed to operate 24/7.

6/21
3.0 Specifications/ Dimensions
Product
Version
Weight
A
B
C
D
E
F
G
H
I
L
M
aircycle ONE+ 100
2,3 kg
218
76
270-510
108
164
117,5
39
23
124
44
26,5
aircycle ONE+ 150
3,9 kg
218
76
300-560
158
218
117,5
39
23
124
44
26,5
3.2 Detailed Specification
✓IPX4 protection degree.
✓Aesthetic front cover easily removeable for cleaning without the need for tools.
✓Automatic management of the inversion time (comfort mode) to optimise the
acoustic and thermal comfort.
✓Free cooling (single direction flow; extract or intake) to prevent heat exchange
when not requested.
✓Integrated multi-colour led to indicate unit status.
✓Simplified synchronisation of up to 10 units: units get automatically
synchronised when they are wired to each other.
✓Totally recyclable plastic components.
✓Double insulated: no earth connection is required.
✓Tested to the latest standards: units are tested in the TÜV Rheinland recognised
laboratory. Designed and manufactured in accordance with EN60335-2-80 (Low
Voltage Directive) and the EMC Directive (Electromagnetic Compatibility).
✓No water drainage required.
✓Multifunctional remote controller with an LCD screen.
✓Back-up touch button at the side of the ventilation unit.
✓Smart humidity control increasing extract speed when needed.
✓Easy and safe maintenance thanks to a magnet system which allows the
ventilation unit to be quickly removed from its base.
✓Automatic anti-frost protection.

7/21
3.3 ErP Directive - Regulations 1253/2014 - 1254/2014
a)
Mark
-
BROOKVENT
b)
Model
-
aircycle ONE+ 100
aircycle ONE+ 150
c)
SEC class
-
A
A
c1)
SEC warm climates
kWh/m
2
.a
-17
-18,1
c2)
SEC average climates
kWh/m
2
.a
-40,6
-41,6
c3)
SEC cold climates
kWh/m
2
.a
-81,8
-82,8
Energy label
-
Yes
d)
Unit typology
-
Residential - bidirectional
e)
Type of drive
-
Multi-speed drive
f)
Type of Heat Recovery System
-
Heat recovery
g)
Thermal efficiency of heat recovery
%
74
74
h)
Maximum flow rate
m
3
/h
25
60
i)
Electric power input at maximum flow rate
W
3,5
6
j)
Sound power level (L
WA
)
dBA
39
40
k)
Reference flow rate
m
3
/h
18
41
l)
Reference pressure difference
Pa
10
10
m)
Specific power input (SPI)
W/m
3
/h
0,139
0,80
n1)
Control factor
-
0,65
0,65
n2)
Control typology
-
Local demand control
o1)
Maximum internal leakage rate
%
N/A
o2)
Maximum external leakage rate
%
1
1
p1)
Internal mixing rate
%
N/A
p2)
External mixing rate
%
N/A
q)
Visual filter warning
-
N/A
r)
Instructions to install regulated grilles
-
N/A
s)
Internet address for pre/disassembly instructions
-
www.brookvent.co.uk
t)
Airflow sensitivity to pressure variations
%
N/A
u)
Indoor/outdoor air tightness
m
3
/h
18
50
v1)
AEC-Annualelectricityconsumption-warmclimates
kWh
1
0,6
v2)
AEC - Annual electricity consumption - average climates jährlicher
kWh
1
0,6
v3)
AEC - Annual electricity consumption - cold climates jährliche
kWh
1
0,6
w1)
AHS-Annual heating saved - warm climates
kWh
19,5
19,5
w2)
AHS -Annual heating saved - average climates
kWh
43,1
43,1
w3)
AHS - Annual heating saved - cold climates
kWh
84,3
84,3

8/21
4.0 Operation
The unit is supplied with an infrared remote controller (K) as standard, as well as its
support base (L) which can be wall mounted. A magnet keeps the controller attached to
the base.
The controller is equipped with an LCD display to visualise the setting to be transferred
to the unit; anytime a touch button is pressed, the setting shown on the LCD display is
transferred to the unit. The IR receiver (J) is placed on the left side of the ventilation unit:
it is recommended to point the controller towards the receiver when any setting needs
to be transferred.
One remote controller can control numerous units.
When switched on the fan unit emits a long acoustic signal.
Through the IR controller the following functionalities can be activated/deactivated.
When a setting is transferred to the unit, a short acoustic signal is emitted and a green
led flashes.
In case the remote controller gets lost or the batteries are dead, speeds 1, 3 and OFF
position can be selected from the unit’s touch button (C). The airflow direction is always
alternate and the operation mode (either comfort or efficiency) is the last selected from
the remote controller.
It is possible to synchronized up to 10 units contemporaneously, through wire (2 pole
twisted pair type, max 30m length) so to have mode and inversion time synchronized.
When the unit is switched on for the first time, the rotation direction of each unit
(clockwise or anti-clockwise) is automatically established. Other functionalities like
speed, smart humidity control and boost, continue to be controlled independently on
each single unit.
Wiring diagram as per fig. 16B.
4.1 Remote functions

9/21

10/21
4.2 Alerts and solutions
4.3 Disposal and recycling
Information on disposal of units at the end of life.
This product complies with EU Directive 2002/96/EC.
The symbol of the crossed-out dustbin indicates that this product must be collected
separately from other waste at the end of its life. The user must,
therefore, dispose of the product in question at suitable electronic and electro-technical
waste disposal collection centres, or else send the product
back to the retailer when purchasing a new, equivalent type device.
Separate collection of decommissioned equipment for recycling, treatment and
environmentally compatible disposal helps to prevent negative effects
on the environment and on health and promotes the recycling of the materials that make
up the equipment.
Improper disposal of the product by the user may result in administrative
sanctions as provided by law.

11/21
5.0 Installation and figures

12/21

13/21

14/21

15/21

16/21

17/21

18/21

19/21
Notes