Brother DCP-L5500D User manual

Unpack the machine and check the components
NOTE:
• The available connection interfaces vary depending on the
model.
• You must purchase the correct interface cable for the interface
you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 2 metres long.
Network cable
(Except for DCP‑L5500D)
Use a straight‑through Category 5 (or greater) twisted‑pair
cable.
• The illustrations in this Quick Setup Guide show the
MFC‑L6900DW.
Remove the packing materials and install the drum unit and toner cartridge assembly
Load paper in the paper tray
Connect the power cord and turn the machine on
Select your language (if needed)
(Only for certain models)
Drum Unit and Toner Cartridge
Assembly
(pre‑installed in models
DCP‑L5500D / DCP‑L5500DN /
DCP‑L5600DN / DCP‑L6600DW /
MFC‑L5700DN / MFC‑L5750DW /
MFC‑L5755DW / MFC‑L5900DW /
MFC‑L6700DW / MFC‑L6800DW /
MFC‑L6900DW (For Oceania))
Drum Unit
(pre‑installed in model
MFC‑L6900DW only
(Except for Oceania))
Inbox Toner Cartridge
(model MFC‑L6900DW only
(Except for Oceania))
(For U.K.) (For Others)
AC Power Cord Telephone Line Cord
(For MFC models)
Quick Setup Guide Product Safety Guide Basic User's Guide
or Reference Guide
(only for certain models)
Installation CD‑ROM Telephone Line Cord Adapter
(Australia only) (For MFC models)
1. On the machine’s Touchscreen, press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press .
3
5
2
1
Adjust the paper
guides.
Back Front
DCP‑L5500D / DCP‑L5500DN / DCP‑L5600DN / DCP‑L6600DW / MFC‑L5700DN / MFC‑L5750DW / MFC‑L5755DW / MFC‑L5900DW / MFC‑L6700DW / MFC‑L6800DW / MFC‑L6900DW (For Oceania)
Remove the orange part.Discard the silica gel pack.
Select your country/language
(Initial setup only)
After turning the machine on, you may be required to set your country
or language (depending on your machine).
If required, follow the on‑screen instructions.
4
MFC‑L6900DW ONLY (Except for Oceania)
Remove the orange part. Remove the orange part.
Quick Setup Guide
DCP‑L5500D / DCP‑L5500DN / DCP‑L5600DN / DCP‑L6600DW /
MFC‑L5700DN / MFC‑L5750DW / MFC‑L5755DW / MFC‑L5900DW /
MFC‑L6700DW / MFC‑L6800DW / MFC‑L6900DW
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
Watch our Video FAQs for
help with setting up your
Brother machine:
solutions.brother.com/videos.
D0056H001‑01
UK
Version A

Connect your machine and install software
Macintosh/Windows®computer without CD‑ROM drive
Download the full driver and software package from the
Brother Solutions Center.
(Macintosh) solutions.brother.com/mac
(Windows®) solutions.brother.com/windows
Finish
6
Follow the on‑screen instructions
to continue installation.
NOTE:
If connection is unsuccessful, see Cannot set up
your machine? below.
NOTE:
If the Brother screen does not appear automatically, click
(Start) > Computer (My Computer).
(For Windows®8: click the (File Explorer) icon on
the taskbar, and then go to Computer (This PC).)
Double‑click the CD‑ROM icon, and then double‑click
start.exe.
Windows®computer with CD‑ROM drive
For other models
1. Restart your wireless access point/
router.
Alternate wireless configuration method (Setup Wizard)
4. Select the SSID.
To use with your computer uu Step Connect your machine and install software
Cannot set up your machine?
Wired network
USB
Wireless network
Disconnect the cable. Restart your machine,
computer and/or mobile
device.
Repeat .
Go to Alternate wireless
configuration method (Setup Wizard).
3. Press > [Setup Wizard] >
[Yes].
The LCD displays
[Connected].
SSID: XXXXXXX
Network key: XXXX
To use with your mobile device uu Print and scan using your mobile device (not available for DCP‑L5500D)
For DCP‑L5500D
2. Find the SSID and Network key.
5. Enter the Network key.
NOTE:
For information on how to enter text, see the
printed Basic User's Guide or Reference Guide.
Choose your Connection Type:
Print and scan using your mobile device (not available for DCP‑L5500D)
Download “Brother iPrint&Scan” to start using your machine with mobile
devices.
solutions.brother.com/ips
AirPrint is available for OS X and iOS users.
For more information, see the AirPrint Guide on your model’s Manuals
web page.
solutions.brother.com/manuals
Brother regularly updates firmware to add features and fix identified problems.
To check for the latest firmware, visit solutions.brother.com/up1.
Brother support website http://support.brother.com