Brother HL-L2380DW User manual

Unpack the machine and check the components
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct
installation procedure.
NOTE:
•The components included in the box and the AC power plug may differ depending on your
country.
•The illustrations in this Quick Setup Guide are based on the MFC‑L2740DW.
•You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
Network cable
Use a straight‑through Category 5 (or greater) twisted‑pair cable for 10BASE‑T or
100BASE‑TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the machine to your computer/mobile device
Connect the power cord and turn on the machine
Select your language (If needed)
(Only for certain models)
A
Drum Unit
(Pre‑installed)
AC Power Cord
(only for certain
models)
Quick Setup Guide CD‑ROM
B
(For U.K.) (For Others)
Inbox Toner
Cartridge
Telephone Line Cord
(For MFC models)
Product Safety Guide Basic User's Guide
(only for certain
models)
1. On the machine’s Touchscreen, press
(Settings) > All Settings >
Initial Setup > Local Language.
2. Press your language.
3. Press .
A
B
B
A
A
B
3
5
2
6
1
• Windows®PC with a CD‑ROM drive, go to step 6A
• Windows®PC without a CD‑ROM drive, go to step 6B
• Macintosh, go to step 6B
• Mobile device users, go to step 6C
Back Front
Select your country/language
(Initial setup only)
After turning on the machine, you may be required to set your country
or language (depending on your machine).
If required, follow the on‑screen instructions.
4
Remove the orange part. Remove the orange part.
Adjust the paper guides.
Quick Setup Guide
HL‑L2380DW / DCP‑L2560DW / MFC‑L2720DW /
MFC‑L2740DW
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Watch our FAQ Videos for help with setting up your
Brother machine: solutions.brother.com/videos.
Version 0
UK

Configuration using the CD‑ROM (Windows®)
Follow the on‑screen
instructions until the
Connection Type screen
appears.
Finish
6A
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
After you download the driver and software package, follow the on‑screen instructions until the Connection Type screen appears. Refer to 6A Configuration using the CD-ROM
(Windows®).
Connect the machine and wireless LAN access point/router from the machine’s control panel.
Connection Type
Print and scan using your mobile device
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Wireless setup for mobile devices
Wireless setup is now complete.
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Configuration without using the CD‑ROM (Windows®without CD‑ROM drive or Macintosh)
On the machine’s control panel, press
> Setup Wizard > Yes.
6C
6B
Finish
Select the specified SSID, and then enter the
Network key.
Download “Brother iPrint&Scan” to start using your machine with mobile devices.
solutions.brother.com/ips
NOTE:
Before you can use your machine with your mobile device, download “Brother iPrint&Scan.”
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double‑click the CD‑ROM icon, and then double‑click start.exe.