Brune HP50 User manual

1
Connecting the dehumidifier HP50/HP25 to a WLAN
Switch on the dehumidifier HP50/HP25.
Search the network environment on the PC or search for "Brune WLAN" under Network & Internet
settings (mobile device) and connect to it:
Now enter the IP address 192.168.4.1 in the web browser and open the start page of the network
setup.

2
Click on "Settings" to open the menu for the WLAN configuration.
1.) The mode must be changed from "Config" to "Client".
2.) Enter the name of your WLAN network in the SSID field.
3.) Enter the corresponding password for your WLAN network in the PWD field.
Transfer all entries to the device with "Apply" to finalize.
The dehumidifier connects to your WLAN and receives a new IP address. You can now control your
dehumidifier HP50/HP25 with the Brune Control APP (available for iOS and Android) or via the
remote portal.

3
The dehumidifier HP50/HP25 can be controlled with the Brune Control app (available free of charge
for Android and iOS).
Activate Brune WLAN / Reset network settings
Switch off the device by using the standby button. Now press the standby button and hold it down
for 5 seconds until "Ad" appears on the display.
Press the blower level button (HP50) / SET button (HP25) to select the "n9" menu. Pressing the
HUMIDITY + and - buttons simultaneously triggers a countdown to reset the settings.
ATTENTION!
Once the countdown is complete, all settings of the WLAN/WiFi module are deleted (display "n0").

4
To enable operation of the device via the remote portal, you must log in under
https://brune.remoteportal.de.
To do this, enter the labelled MAC address and the password below it in the login window.
HP50 HP25
The homepage of the remote portal opens and configurations can be made.
After registering, you can use the remote portal free of charge for 30 days via a trial account.