Brunt WRAKR1801 User manual

Brunt Fast Wireless Charger N
Manual

General Description
The Brunt Fast Wireless Charger N is a device that recharges your smartphone just putting on it.
Size
General Specifications
- Model : Brunt Fast Wireless Charger N (WRAKR1801)
- Feature : Quick Charge
- Maximum Input Power : 15W
- Maximum Input Voltage / Current : 9V / 1.6A, 5V / 1.7A
- Maximum Output Power : 10.8W
- Maximum Output Voltage / Current : 9V / 1.2A, 5V / 1.2A
- Conversion Rate : 75%(Max)
- Sensing Distance : 1.5 ~ 4.5 mm (from the top of charger)
- Working Temperature : -10 ~ 45 °C

Component
1 USB 2.0 Micro 5pin Cable (Length 1M)
1 Fast Wireless Charging Pad
1 Rubber Prop
Installation Guide
Connect a quick charge adapter and this device with included USB cable.
Power on the quick charge adapter
Place your smartphone on the charger
Warning
Please read the below instructions for safety.
Do not disassemble or attempt to service this product.
Do not immerse product in any liquid or expose to heat or moisture.
If product is operating improperly, contact Brunt support immediately.
Do not give a shock to the product while it is powered.
Keep device out of reach of children.
LPS test passing adapter use only
If the product smells strange or smoke coming out from it, immediately unadapter and contact
Brunt
Support
For other questions, please refer to the FAQ. ( www.brunt.co )

Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
RF Exposure Statement
This appliance and its antenna must not be co-located or operation in conjunction with any other
antenna or transmitter.
A minimum separation distance of 15 cm must be maintained between the antenna and the
person for this appliance to satisfy the RF exposure requirements.
Applicant: Brunt Co., Ltd.
Address: 4F. Olympia B/D, 89, Yangjaecheon-ro, Seocho-gu, Seoul, Korea
Manufacturer: Woo Young Co., Ltd.
Address: 46, Bongsu-daero 501beon-gil, Seo-gu, Incheon, 22770 Korea