BT9 HiTag 2 User manual

HiTag 2 User manual
The Xsense HiTag is a sensing unit of the Xsense Cold Chain Monitoring System. Placed inside
one of the product cartons in a pallet, it monitors the temperature and relative humidity of the product’s
immediate environment. When an Xsense Communication Unit (CU) is in the vicinity, data is
transmitted to the Xsense System and immediately viewable to users via the secure, web-based Xsense
application.
Activating the tag is a simple two step procedure:
1. Press and hold the button for one second until the LED starts flashing
2. Check that the indicator LED is flashing.
NOTE: The indicator LED is located beneath the plastic casing.
If it does not slowly flash and stops after 10 seconds the HiTag failed to activate

FCC ID: QYGHiTag2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Warning
Modifications not expressly approved by the manufacturer could
void the user authority to operate the equipment under FCC Rules.