
BUGERA BTX36000
Guitar Amplifiers 3,800-WattTrue Bi-Amping Stereo Bass Amplier Head
with Compressor and Graphic EQ
The NUKE
We call it “The NUKE” for a good reason —
with 3,800-Watts in bridged mode and 2 x 1,950
when run in stereo or bi-amped mode, this bad
boy is the most powerful bass amp in the world!
But The NUKE isn’t just about power. With its
staggering array of tone-sculpting options,
including a 3-band EQ with sweepable mids,
Ultra-High, Ultra-Low and Bright switches,
and a 9-band graphic EQ — The NUKE is all
about tone!
Extremely Broad Tonal Toolkit
All the power in the world won’t save you if
your tone sucks! That’s why we gave
The NUKE the ultimate in tone-shaping
capability. Sure, you get the typical BASS, MID
and TREBLE controls, but you also get total
command over your bass’“voice”via the Mid
Frequency sweep control, which allows you to
dial in the midrange frequency that best suits
your instrument or playing style. Simply choose
one of the ve settings (220 Hz, 450 Hz, 800 Hz,
1.6 kHz or 3 kHz) and adjust the MID control
to the desired level. For example, if you play in
a serious metal band and really need to crank
out hard bass, select either 220 or 450 Hz and
boost the MID control. Need to scoop out the
mids for slap-style funk, choose 800 Hz and
lower the MID control. Sweepable mids make
dialing in your tone incredibly easy and fast.
You can also take advantage of The NUKE’s
boost switches to emphasize certain
dedicated frequency ranges. For instance,
you can add some top-end quickly by
engaging the BRIGHT (centered at 2 kHz, +6dB)
or the ULTRA HIGH buttons (5 kHz, +6 dB).
Feel like wielding the “hammer of the gods?”
Throw the ULTRA LOW switch for a fuel-
injected 50 Hz excursion to Valhalla.
But The NUKE Doesn’t
Stop There…
Sometimes you need even ner control of
your rig’s frequency response — that’s where
The NUKE’s 9-band graphic EQ comes in.
Imagine the frequency range of your sound
as a highway, a very wide one with nine
lanes. Each of these “lanes”represents a
specic frequency range. The rst three
lanes, labeled 33-150 Hz, contain the really
low frequency stu, mainly the lower string
fundamentals, or“true” pitch. The next
three lanes, labeled 300-900 Hz cover the
fundamental tones of the upper strings. The nal
three EQ lanes (2, 5 and 8 kHz) handle the bulk
of the upper harmonics, and they can make or
break your sound.
• Extremely powerful 3,800-Watt true
bi-amping stereo bass amplier
• Ultra-exible 2 x 1,950-Watt stereo or
3,800-Watt bridged mode
• Integrated Crossover with dedicated
Frequency and Balance controls for
bi-amping operation
• Active, ultra-musical 9-band graphic EQ
for total sound control
• Dedicated Bass, Mid, Treble and additional
Mid frequency control enable ultimate
sound shaping
• Switchable Ultra Low and Ultra
High processing for ultimate tone
• Integrated Compressor increases sustain
and smoothes out volume peaks when
playing dynamic slaps
• Bright function for brilliant
sound enhancement, even with
heavy compression
• Switchable Limiter for ultimate
volume without distortion plus total
system protection
• Balanced DI outputs with pre/post
routing for direct connection to your
mixing console
• Tuner outputs on front and rear panel
• Stereo Eects loop for external eects
devices (stomp boxes, rack eects, etc.)
• Dual footswitch for graphic EQ and Eects
loop included
• Independent DC and thermal overload
protection on each channel automatically
protects amplier and speakers
• High-quality components and
exceptionally rugged construction
ensure long life