BullFrog AKITO OD1047 User guide

ASSEMBLY AND INSTRUCTION MANUAL
08.11.2021
MODEL OD1047 AKITO
© 2014 K URT BEI E R &KATI QU I N G E R
www.bullfrog-design.com
For general informations please refer to the information about outdoor furniture!
Bullfrog recommends the suitable waterproofed protective covers for outdoor furnitures.
Galvanised castors (extra charge) Armrest and back
completely foldable
With practical shelf
due to lateral seat adjustment

OD1047 AKITO
© 2014 K URT BEI E R &KATI QU I N G E R
Use of back- and armrest function
Akito does not need connectors to build a corner group.
Sitting
1. Adjustment of back slant:
To adjust the desired position grip the back from the outside and pull it carefully into your direction.
3. From zero position you can easily snap the back into desired position.
2. To obtain zero position pull the back carefully beyond the top position into your direction and fold down into
zero position.
ATTENTION!
DON`T SIT DOWN ON BACK OR ARMREST EXCEPT THEY ARE AT LOWEST POSITION.
To adjust armrest, proceed the same way.