BullFrog OD1037 LETTINO User guide

ASSEMBLY AND INSTRUCTION MANUAL
MODEL OD1037 LETTINO
© 2011 K URT BEI E R &KATI QU I N G E R
www.bullfrog-design.com
Lounger Lettino with intermediate table
...as comfort double lounger
Flexibility due to practical castors
Lettino chair with and without stool
Functional lounger Lettino, single or...

OD1037 LETTINO
© 2011 K URT BEI E R &KATI QU I N G E R
1. Adjustment of footrest with type 224 (1):
Grip the footrest at bottom side and pull upwards into
your direction until you have reached the desired position.
How to fold down in zero position:
To obtain zero position pull the footrest carefully
beyond the top position into your direction and fold
down into zero position.
3. Adjustment at headrest (3):
Grip the head rest and pull it carefully into your direction.
To obtain zero position pull the head rest carefully beyond the last position into your direction and fold down into zero
position.
From zero position you can easily snap the head rest into desired position.
Footrest, functional back and headrest:
2. Adjustment of back slant (2):
Grip the back at waist level and pull it carefully into your direction.
To obtain zero position pull the back carefully beyond the top position into your direction and fold down into zero position.
From zero position you can easily snap the back into desired position.
1
3
3
3
3

OD1037 LETTINO
© 2011 K URT BEI E R &KATI QU I N G E R
How to insert table 859:
TOPSIDE
Lounger 1 Lounger 2
Table
The table lies on the frame.
Topside
Press the cushion
slightly upwards...
..and hang the table in the
frames between the 2 couches.

Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.com
OD1037 LETTINO
© 2011 K URT BEI E R &KATI QU I N G E R
Lounger 1 Lounger 2
Connector clips VB1:
Fixation with
2 connector clips (VB1)
From above
From above
From the front
From the front
Push 2 loungers together and connect them
with the 2 connector clips from above (a) and
from the front (b).
(a)
(a)
(a)
(a)
(b)
(b)
(b)
(b)
Lounger 1 Lounger 2