Bumble Bee 92752 User manual

Camouflage Hunting BlindCamouflage Hunting Blind
Camouflage Hunting BlindCamouflage Hunting Blind
Camouflage Hunting Blind
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit ourWeb site at http://www.harborfreight.com
Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor FreightTools.
For technical questions and replacement parts, please call 1-800-444-3353
92752

SKU92752 Page 2
Specifications
Warning:This item is NOT FIREPROOF. Do not expose to fire or flame .
The camouflage is of “Mossy Oak”pattern.The interior has a black polyurethane
“Shadow Guard” coating. A spring steel frame is sewn into the fabric for easy
assembly and taking down of this blind.There are three observation windows.The
supplied backpack carrying case makes it easy to carry this item into and out of
thewoods.
SaveThis Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When assembling this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to equip-
ment. Read all instructions before assembling this Hunting Blind!
1. Keep work area clean when assembling. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use this product in high wind or other
extreme weather conditions. Do not expose to high heat, fire or flame.
WARNING:This product is not a toy.Children must not be allowed to play on, in or
aroundit.
3. Use the right product for the job.This product is ideal for camouflage
situations in mossy oak areas. Do not modify this product and do not use this
product for a purpose for which it was not intended. Note:This is only a
camouflage item, not a security device. Harbor FreightTools is not
responsible for its use in high risk or other extreme conditions.
4. Dress properly. Do not wear loose clothing or jewelry when assembling this
product, as they can be caught in zippers or other moving parts.
:noitcurtsnoC retaWhtiwemarFleetSgnirpS llehSretseyloPtnatsiseR :noitavresbO swodniWdereppiZ)3( spalFnwod-eithtiw
delbmessA :snoisnemiD nalproolferauqS"2/1-6 thgieH'6 detcapmoC :snoisnemiD xerauqs"2/1-11 kcihT"2/1-4
dedulcnI :seirosseccA gaBgniyrraC/kcapkcaB sekatSnwod-eiT.aiD"61/3x"8 :thgieWteN.sbL2.9

SKU92752 Page 3
5. Do not overreach. Keep proper footing and balance at all times when
assembling or using this product. Do not reach over or across this product.
6. Stay alert. Watch what you are doing, use common sense when assembling
or using this product. Do not try to assemble or use this product when you are
tired.
7. Check for damaged parts. Before assembling this product, any part that
appearsdamagedshould be carefully checked to determine thatit will operate
properlyand perform its intended function. Anypart that isdamaged should be
properlyrepairedorreplaced.Ifpartsaredamagedormissing,contactHarbor
FreightTools at the number listed on the front of this manual.
8. Do not attempt to assemble or use this product if under the influence of
alcohol or drugs. Read warning labels on prescriptions to determine if your
judgmentor reflexes are impaired whiletaking drugs.If thereis anydoubt, do
not attempt to assemble or use this product.
Warning:Thewarnings,cautions,andinstructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are fac-
tors which cannot be built into this product, but must be supplied by the opera-
tor.
Unpacking
When unpacking, check to make sure all parts are included.
CamouflageHuntingBlindOuthouse
Backpack carrying case
(10)Tie-downstakes
If any parts are missing or broken, please call Harbor FreightTools at the number
on the cover of this manual.

SKU92752 Page 4
Assembly and Operation
Find a level, dry area to assemble this item. Pay attention to wind direction, game
trails,andother information relevant toyour huntingor observation program.
CAUTION: This item is not suited for use in high wind situations or other extreme
conditions.
1. Remove the blind from its carrying bag.
2. As you unfold the blind, pay attention to how it is folded.This will make it
easier for you to refold the blind when you want to return it to its carrying
case.
3. Because of the spring steel inserts sewn into the cloth, this blind is “self
erecting”. As it infolds, it assumes its erected shape.
4. Remove any objects on the ground that might cut or damage the cloth, and
position the blind as desired.
5. To prevent the blind from shifting or blowing over, stake it to the ground using
the included metal stakes. Place these one at a time through the loops sewn
into the base of the blind, and press them into the ground.You may need to
use a small hammer to drive them into the ground. The included rope can be
used to further stabilize the blind. Attach one end of the rope to loops above
the windows, while attaching the other end of the rope to stakes on the
ground.
6. The loops at the base of the blind can also be used to hold brush to further
blendinto the environment.
WARNING:Theblindis NOTFIREPROOF.Neveruseanyfire or heating device
within the blind. Exposure to flame or high heat may cause the blind to catch on fire
possiblycausingsevere injury or death.
WARNING: Never use anyheating deviceinside the blind.In addition tofire
hazard,someheatingdevicesproducecarbonmonoxide.CarbonMonoxideisa
colorless, odorless gas which can cause severe injury or death.
7. Inaddition tothe horizontal windows,there are vertical windowsin three sides.
If desired one or more of these windows may be opened by pulling back the
flaps and tying the flaps in place with the supplied tieback straps.
8. To enter the blind, unzip the door way and enter.Zip the doorway closed
behindyou.This doorway is wheelchair accessible.

SKU92752 Page 5
To fold up the blind:
1. Remove any stakes or brush that may be in place.
2. Lay the blind on its side, and flatten it.Tuck the floor and side material neatly
in place.
3. Grasp the floor of the blind and lift it
toward the top. When you are a little
morethan half way to folding the
bottom onto the top, twist it
completelyover, either to the right or
left. See photo at right.
4. Once twisted over, the bottom
will lay flat on the top, effectively
folding the blind in half. See photo at
left.
5. Again,graspthelowerportionof
the blind, and begin to fold it toward
the top. Again, when a little more than
halfwayfolded, twist the lower portion
completely over, then lay flat on the
top.See photo below. Note:Do not let
go of the folded blind as it will unfold quickly and possibly cause personal
injuryand/orpropertydamage.
6. Theblindisnow folded small
enough to fit in the backpack
carryingcase.

SKU92752 Page 6
Maintenance
1. Always be sure the blind is clean and dry before folding and putting it away.
2. Neverexposethe blind to fire or flame. Itis not fireproof.
3. Store in a dry place where it will be safe from possible damage, and out of
reachof children or other unauthorized persons.
Replacement Parts
Replacementpartsarenot available for this item.
NOTE: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES That ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.