Burmester Musiccenter 151 MK2 User manual

Operation Manual

iPad® is a registered trademark of Apple® Inc., registered in the U.S. and other countries.
All trademarks listed are the property of their respective owners.
The use of third-party services (Internet radio, music streaming service providers) with the 151 MK2
Musiccenter may be subject to the terms of use of the third-party providers as well as technical
requirements for the user and third parties (Internet access, availability of the services), over which
Burmester Home Audio GmbH has no influence.
Software version 4.10
Dear music lover,
Congratulations on your purchase and thank you for choosing Burmester.
You have chosen a device that combines absolute fidelity and uncompromising quality with technical
innovation and maximum versatility.
Before using the device for the first time, we recommend that you read through the complete manual
at least once so that you can make full use of the capabilities of this exceptional audio device. Should
you still have questions, please contact your dealer or contact us directly.
We’re always happy to discuss your special requests, no matter how unusual. We love a good
technical challenge.
We wish you an exceptional listening experience.
Your Burmester team

151 MK2 Musiccenter 3
W C I D    .......................................
H D I U T M............................................
Symbols and text labels used ................................................................6
Meaning of warning symbols and words ......................................................6
I S I.........................................
D O .....................................................
Front .....................................................................................8
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The remote control ........................................................................11
U  S U  D..................................
Unpacking ...............................................................................12
Scope of Delivery .........................................................................12
Setup ....................................................................................12
H D I C  D........................................
Connecting the Wi-Fi antennas..............................................................13
Connecting analogue signal sources.........................................................13
Connecting digital signal sources ...........................................................13
Connecting the digital output...............................................................14
Connecting the analogue output ............................................................14
Connecting USB storage media .............................................................14
Connecting the network cable ..............................................................15
Connecting a network cable ................................................................15
Connecting a preamplifier or power amplifier.................................................16
S O  D .............................................
C  C   POWER LED .............................
C  D   N .................................
Establishing a cabled connection to the network ..............................................18
Establishing a connection to the network via Wi-Fi.............................................19
T  C

4
U    W  N ................................
O  O    ...................................
Operation on the device or using the remote control ..........................................20
Operation using an iPad®and the iPad®app .................................................21
Operation via a web browser ...............................................................21
H  I        ........................
Connection types with a network connection using anetworkcable .............................22
Connection types with a network connection via Wi-Fi .........................................23
Establishing a LAN connection between the router and the computer............................23
Establishing a Wi-Fi connection between the 151 MK2 and an iPad®.............................23
Establishing a Wi-Fi connection between the 151 MK2 and atablet/PC/Mac ......................23
H D I P  CD .................................................
H D I P C   USB S D ...................
H D I P C   N............................
H D I P C   I ............................
Streaming music online via Idagio, Qobuz or TIDAL............................................25
H D I P C T I S  D ..................
H D I R  CD ..................................................
U    P   D S .............................
D  S N  D V .....................
C O  S U .....................................
M, R  C ........................................
D............................................................
W...........................................................
S.......................................................

WHAT CAN I DO WITH THE 151 MK2?
151 MK2 Musiccenter 5
W C I D    
The 151 MK2 Musiccenter combines several high-quality components in one device
and thus provides various options for playing music with exceptional quality.
COMPLEX ANALOGUE CIRCUIT TECHNOLOGY
The 151 MK2 has been designed with sophisticated symmetrical circuit technology
throughout. The fully DC-coupled signal path with no interfering coupling capacitors
ensures precise low-end sound reproduction, as there is no phase shift in the
acousticrange.
CD drive
Play CDs directly or transfer them to the internal hard drive (ripping).
Internal SSD
Save music tracks to the 2 TB hard drive and optimise the sound quality at the
sametime.
If the device is connected to the Internet, CD covers as well as album and artist details
are automatically downloaded and saved.
Play the stored music either by selecting the track, artist, album and genre or using the
search function.
Home network
Using the DLNA/UPnP standard, the device is able to access music stored on other
network devices in your home network or make the music stored on its hard disk
available to these devices.
Music streaming, downloads and Internet radio
Stream high-resolution music from IDAGIO, QOBUZ and TIDAL using an existing
Internet connection, download high-resolution music from the Internet from
HIGHRESAUDIO or QOBUZ and access a large number of Internet radio stations.
Operation using the iPad®app and web browser
• You can operate the 151 MK2 conveniently with an Apple iPad®using the free
BurmesterMC app.
• If you do not have an iPad®, you can also access the device using any standard web
browser. The web browser interface provides a number of extra functions in addition
to playing albums, tracks and playlists.

HOW DO I USE THIS MANUAL?
6
H D I U T M
This operation manual informs the user how to set up, connect and operate the
151MK2 Musiccenter.
In order to take advantage of the full range of functions offered by the 151 MK2, you
will need either an Apple iPad®with the BurmesterMC app or a computer (PC, tablet,
Mac) with a web browser (an iPad®and computer are not included with delivery).
Please observe the following instructions:
►Read and follow the information provided, in particular the general information on
safety measures and the warning information in the chapters.
►Keep this operation manual.
Symbols and text labels used
3Prerequisite
Indicates a requirement that must be met before a subsequent action can be
performed.
►Action
Indicates a single action.
1.
2.
3.
Sequence of actions
Indicates a sequence of actions that must be performed in the given order.
ªResult
Indicates the result of an action.
Meaning of warning symbols and words
The following warnings, symbols and warning words are used in this document:
The general hazard symbol, in conjunction with the warning words
CAUTION, WARNING or DANGER, warns of the risk of serious
injury. Follow all of the subsequent instructions to avoid injury or
death.
The lightning symbol, in conjunction with the warning word
DANGER, warns of potentially fatal electrical voltage.
ATTENTION The word ATTENTION indicates a hazard that could damage or
destroy the device.
CAUTION The word CAUTION indicates a hazard that poses a low or
moderate risk of injury.
WARNING The word WARNING indicates a hazard that could cause serious
injury or death.
DANGER The word DANGER indicates a hazard that will lead directly to
death or serious injury.

IMPORTANT SAFETY INSTRUCTIONS
151 MK2 Musiccenter 7
I S I
Opening the device
Do not open the device. There are no parts that can be serviced by the user inside the
device. Fuses in the device may be replaced only by authorised personnel such as your
specialist dealer.
Power connection
Use the 3-wire power cable supplied with the device to connect it to the power supply.
The protective earth contact must never be disabled. Furthermore, the device must be
connected to a socket with a properly functioning protective earth connection.
The device has a power supply that automatically adapts to the mains voltage.
Thismeans that the device can be operated with any standard mains voltage.
Route the power cable in such a way that it cannot be damaged. Do not continue to
use the power cable if it is damaged. Instead, switch off the device and contact your
specialist dealer.
Disconnecting the device properly from the mains
To fully disconnect the 151 MK2 from the mains, use the easily accessible mains power
switch on the rear of the device and then disconnect the power cable from the device.
Setup
Consider the following points when choosing where to position the device:
• Avoid exposure to direct sunlight as well as excessive heat, cold, moisture and dust.
• Ensure adequate ventilation. Never place the device on an enclosed shelf.
• The slots and openings on the device are used for ventilation purposes and must
notbe covered.
• Do not expose the device to dripping or splashing water, and do not place
containers of liquid on the device.
• Do not place any open fire sources on the device.
Operation during thunderstorms
ATTENTION
Overvoltages caused by lightning
Overvoltages in the mains — caused by lightning strikes — can damage or even
destroy the device.
►If a thunderstorm is imminent, remove the power plug from the socket. It is not
sufficient to simply switch off the mains power switch, as overvoltages are able to
“jump” over contacts that are not closed.

DEVICE OVERVIEW
8
D O
Front
12
7
346
5
98

DEVICE OVERVIEW
151 MK2 Musiccenter 9
1 LED indicators
• CD IMPORT: Data is being transferred from the CD to the hard drive.
• FILE IMPORT: A file import is in progress via the web interface.
• BACKUP: Your music data is currently being backed up or restored.
• USB ACCESS: A USB device is connected and has been recognised.
• MESSAGE: You have a message.
• NETWORK: There is a connection to the network.
Meaning of the colours:
– Red = No network is available.
– Orange = The device is connected to the network or is in stand-alone
mode.
– Green = There is a connection to the Internet.
2 Left-hand row of buttons for selecting signal sources
• STORED MUSIC: Internally stored music is selected as the source.
• INTERNET MUSIC: Selects Internet radio and if pressed again, selects
TIDAL>QOBUZ>IDAGIO as the source (if streaming sources are configured
on the device).
• USBCD: Selects the USB connection and then the CD as the source one
afterthe other.
• TVDIGITALANALOG: Selects the TV input, the digital input and the analogue
input as the source one after the other.
3 Infrared receiver
The IR receiver receives the signals from the remote control.
4 Right-hand row of buttons for operating all sources
• PLAY/PAUSE: Starts or pauses playback
• STOP/EJECT: Stops playback or ejects the CD.
• SKIP >>I: Playback jumps to the next track.
• SKIP I<<: Playback jumps to the previous track or to the start of the track
currently being played.
5 USB connection
6 LED (operation/standby)
7 Display
8 CD slot
9 ON/OFF switch (POWER)
• ON: Briefly pressing the button upwards switches on the device.
Pressingitupwards again switches the device to standby mode.
• STBY: The device is in standby mode and can also be switched on using
theremote control.
• OFF: The device is switched off. It cannot be switched on using
theremotecontrol.

DEVICE OVERVIEW
10
Rear
10 11 12 14 15
16
13
18 19 2017
10 Connections for the Wi-Fi antennas
11 Network connection: 1x RJ45
12 Analogue input: 1x symmetrical (2x mini XLR)
13 BURLINK interface: 1x D-sub
14 Mains socket
15 Mains power switch
16 USB connections: 3x USB 2.0, 1x USB 3.0 (blue)
17 Digital inputs: 1x TOSLINK, 1x RCA
18 Digital outputs: 1x TOSLINK, 1x RCA
19 Analogue outputs: 1x symmetrical (2x XLR), 1x asymmetrical (2x RCA)
20 Remote control input and output

DEVICE OVERVIEW
151 MK2 Musiccenter 11
The remote control
21 Switch on / put into standby mode
22 Number buttons
Numbers for entering the device settings display (see OSD) and for
selecting tracks directly.
23 Adjust volume
24 Change information on the display
25 Playback control:
Stop playback.
Start or pause playback.
Internet radio: Navigate between stations in the station list.
For all other sources: Jump to the start of the track that is
currently being played. Press a second time to jump to the
previous track.
Rewind playback by 10seconds.
Internet radio: no function
Fast forward playback by 10seconds.
Internet radio: no function
Internet radio: Navigate between stations in the station list.
Allother sources: Jump to the next track.
26 Source selection:
TUNER Selects Internet radio or streaming services as the source.
PHONO The analogue input is selected as the source.
TAPE Internally stored music is selected as the source.
DISC Selects USB followed by CD as the source.
AUX Selects the TV input followed by the digital input as
thesource
27 PROGR. Switch shuffle on/off
28 REPEAT Switch repeat on/off
29 MODE Switch smooth on/off
30 AUDIO Switch between 96kHz and 192kHz sampling frequency.
31 DIM Dim the display brightness
32 OSD Display and change device settings.
►First press theOSD button and then enter one of the following
codes on the remote control:
– 1 – 1– 1: IP address and MAC address
– 2 – 2– 2: Serial number and device versions
– 2 – 5– 8: Perform a firmware update
– 7 – 8– 9: Switch between standard, Wi-Fi and stand-alone mode
21
22
23
24
25
26
30
28
31
32
29
27

UNPACKING AND SETTING UP THE DEVICE
12
U  S U  D
WARNING
Suffocation hazard
The device is delivered packed in a plastic bag, which can pose a suffocation hazard
for children.
►Keep the plastic bag out of the reach of children.
Unpacking
1. Place the box on the floor and remove all accessories and the device.
2. Position the device on a stable and level surface.
3. Protect the device from heat and moisture.
4. Connect the device as described in the following chapter.
Scope of Delivery
The following parts are included with delivery of the 151 MK2:
• 151 MK2
• 2 screw-on antennas for Wi-Fi reception
• Power cable
• Remote control
• 2 XLR to mini XLR adapter cables
• 2 XLR-RCA adapters
• Operation manuals (OM): OM for the 151 MK2 Musiccenter, instructions for
operation via the iPad®app, instructions for operation via a web browser,
TIDALinstructions
Setup
Carefully remove the device from the packaging and place it in a suitable location.
Toprotect the device against overheating, ensure there is adequate ventilation when
choosing where to position the device. Avoid exposure to direct sunlight, dust
andmoisture.
Make sure that the surface on which you position the device is sturdy enough to take
itsweight.
The slots and openings on the device are used for ventilation purposes. They must not
be covered by newspapers, tablecloths, curtains, etc.
Additional ventilation must be ensured if using the device in very warm environments.
The device should not be used in extremely damp environments, such as the
bathroom.
The IR receiver receives the signals from the transmitter in the remote control and
should not be covered by objects.

HOW DO I CONNECT THE DEVICE?
151 MK2 Musiccenter 13
H D I C  D
Connecting the Wi-Fi antennas
ATTENTION
Damage due to missing or incorrect connection
If antennas are not connected, it can result in damage to the Wi-Fi unit. Screwing in
the antennas too tightly can damage the connections.
►Always mount both antennas even if you will not be using Wi-Fi.
►Tighten the screw base by hand only. Do not use a tool.
►Mount the two antennas supplied into the antenna sockets.
Connecting analogue signal sources
1. Connect the adapter cable supplied to the mini XLR connections.
Connect a symmetrical NF cable to the adapter cable.
or
Connect an asymmetrical cable to the adapter cable using the
XLR-RCAadapterssupplied.
or
Connect the adapter cable directly to the signal source device.
Connecting digital signal sources
►Use an electrical or optical digital cable.

HOW DO I CONNECT THE DEVICE?
14
Connecting the digital output
The output signal is available in digital format at these connectors.
►Use an electrical or optical digital cable.
Connecting the analogue output
The output signal is available in analogue format at these connectors.
►Use a symmetrical or an asymmetrical cable.
Connecting USB storage media
The 151 MK2 has five USB sockets: four on the rear and one on the front of the device.
Note: USB hard drives with high power consumption should be connected to the
USB3connection. This connection is labelled on the rear of the device and is easy
toidentify as it is blue rather than black.

HOW DO I CONNECT THE DEVICE?
151 MK2 Musiccenter 15
Connecting the network cable
WARNING
Missing or faulty protective earth contact
A missing or incorrectly connected protective earth contact poses
arisk to life.
►Before connecting the device, make sure that the protective earth
contact in your plug socket is in operation.
►Contact a professional if you are in any doubt.
3The MAINS power switch is set to OFF.
1. Insert the supplied power cable into the mains socket on the device and plug it into
the plug socket.
2. Switch the MAINS power switch to ON.
Connecting a network cable
The 151 MK2 can be connected to your home network using the Ethernet connection
and a network cable.
►Use a network cable to connect the device to the router.

HOW DO I CONNECT THE DEVICE?
16
Connecting a preamplifier or power amplifier
The Musiccenter has analogue and digital outputs for connecting a preamplifier or
power amplifier. As the volume can be controlled using the remote control, you can
connect the Musiccenter directly to a power amplifier. The digital output is ideal for
connecting to a preamplifier with a digital input.
ATTENTION
Damage from connecting components during operation
Connecting components that are switched on can result in damage to the
Musiccenter or other components.
►Switch all components off before connecting them with one another.
►Make sure that all connections are correct before switching on the system.
Connecting the 151 MK2 to a preamplifier
You can use the analogue or the digital outputs to connect the device to a preamplifier.
A digital connection is recommended if the digital-to-analogue converter (DAC) in
yourpreamplifier is of very high quality. With an analogue connection, the balanced
connection gives you the better result in terms of sound.
3The components to be connected are switched off.
1. Connect the Musiccenter and preamplifier as required.
2. Choose a suitable audio profile via the iPad®app or the web interface.
Connecting the 151 MK2 to a power amplifier
Symmetrical XLR sockets and asymmetrical RCA sockets are provided for the analogue
connection to a power amplifier. The balanced connection ensures a better sound.
3The components to be connected are switched off.
1. Connect the Musiccenter and power amplifier as required.
2. Choose a suitable audio profile via the iPad®app or the web interface.

SWITCHING ON THE DEVICE
151 MK2 Musiccenter 17
S O  D
1. The MAINS switch (rear of the device) is set to I(On).
2. Switch the POWER switch on the front of the device to the middle position.
ªFollowing a delay of up to 3 seconds, the LED lights up.
3. Press the POWER switch briefly upwards or press the POWER button on the
remotecontrol.
ª“STARTING” followed by “PREPARE” appears on the display.
ªOnce the 151 MK2 has been started successfully, “MC 151” appears on the
display. The LEDs on the left-hand side of the front of the device indicate the
current operating mode.
Switching the device to standby mode:
►Press the POWER switch on the device briefly upwards or press the POWER button
on the remote control.
ªThe display shows “SHUTDOWN”.
ªOnce the system has shut down, the device enter standby mode.
Switching the device off completely:
►Press the POWER switch downwards to the O (Off) position.
ªOnce the system has shut down, the device switches off. The device can no
longer be switched on using the remote control.
Note: Always switch the device off using the ON/OFF switch before switching the
mainspower switch (15) to OFF.
C  C   POWER LED
You can change the colour of the LED (6). Two different colour schemes are available.
In the delivery state, the POWER LED lights up red in standby mode. When the device
is switched on, it lights up green. When the device is off, the POWER LED is not
illuminated.
Changing the colour scheme:
3The device is in standby.
3Press the Power switch (8) upwards for 10 seconds.
ªThe colour of the LED changes.
ªThe device has switched to the other colour scheme.
Scheme Switched on Standby Switched off
1 green red off
2red orange off

CONNECTING THE DEVICE TO A NETWORK
18
C  D   N
The 151 MK2 must be connected to a network in order to use it together with other
media devices and to access the Internet. An Internet connection enables you to use
additional functions:
• Retrieve album information from the Internet when ripping CDs.
• Choose from a wide variety of Internet radio stations.
• Stream music content from IDAGIO, TIDAL and QOBUZ (subject to a charge).
• Download music content from HIGHRESAUDIO and QOBUZ (subject to a charge).
• Receive messages e.g. about a software update.
• Receive direct customer support via the integrated Help system.
• Perform a software update via the Internet.
Detailed information about these functions can be found in the iPad® and Web
interface operation manuals.
Note: You can also use the 151 MK2 without a network. For information, see "Using the 151
MK2 Without a Network" on page20.
Establishing a cabled connection to the network
Router
1. Connect the 151 MK2 to your router using a network cable.
2. Press the OSD button on the remote control, followed by the buttons 7–8–9.
ªAll the LEDs on the device light up orange.
3. For standard mode, press 0followed by OK.
ªDuring the switching process, the NETWORK LED on the device flashes red and
“SWITCHING NETWORK” appears on the display. Once the switch has taken
place, the NETWORK LED lights up orange. As soon as the device is connected
to the Internet, the NETWORK LED lights up green.
NOTE: If you experience problems connecting to the network, you can also contact your
Burmester dealer. They will be happy to assist you with the installation process.

CONNECTING THE DEVICE TO A NETWORK
151 MK2 Musiccenter 19
Establishing a connection to the network via Wi-Fi
Router
Standard process:
1. Press the OSD button on the remote control, followed by the buttons 7 – 8 – 9.
ªAll the LEDs on the device light up orange.
2. Press 2followed by OK.
ªThe network scan commences and the Network LED flashes red. Once the
network scan is complete, the Network LED flashes alternately green and orange.
3. Connect your computer to your 151 MK2 via Wi-Fi (see "Establishing a Wi-Fi
connection between the 151 MK2 and atablet/PC/Mac" on page23).
4. Open a web browser on your computer and enter the device IP address
192.168.111.1 or its name http://musiccenter151.local in the address field.
ªThe Network page of the web interface is opened. A list of all available
Wi-Finetworks is displayed.
5. Click on the name of the Wi-Fi network you wish to use.
6. An encrypted network is indicated by a key symbol. In this case, enter the
Wi-Fipassword for your router and click accept.
ªThe Network LED initially lights up orange. It then changes to green once the
device is connected to the Internet.
ªThe network settings are saved. The device is connected to the Wi-Fi network.
Note: If you are using an iPad®to operate the device, you can also open the BurmesterMC
app once you have connected the iPad®with the 151 MK2. Click Configure. The
browser is started automatically and the selection window for Wi-Fi networks opens.
Note: In the case of a hidden Wi-Fi network, you must click the Not in list (hidden ssid)
selection button and add the name of the Wi-Fi network in the SSID field. Then enter
the Wi-Fi password for your router and click accept.
Note: If an incorrect password is entered, the device will not connect and the Network
LEDlights up red (after max. 1.5 minutes). Start again with step 1 to establish a
Wi-Ficonnection.
Note: If the 151 MK2 is connected to the network as a Wi-Fi client, it does not provide its own
access point. In this case, communication with the device is possible only via the router.

USING THE 151 MK2 WITHOUT A NETWORK
20
U    W  N
You can also use the device without a connection to your network and operate it via
Wi-Fi with a computer (tablet, PC, MAC). In this case, however, you cannot connect
the151 MK2 to other network devices or use the benefits of an Internet connection
(see"Establishing a cabled connection to the network" on page18).
To operate the 151 MK2 without a network, the operating mode must be changed from
the standard mode set at the factory to stand-alone mode.
Switching the operating mode to stand-alone mode:
1. Press the OSD button on the remote control, followed by the buttons 7–8–9.
ªAll the LEDs on the device light up orange.
2. For stand-alone mode, press1followed by OK.
ªThe NETWORK LED on the device flashes red during the switching process.
ªOnce the switch has taken place, the NETWORK LED lights up orange.
In stand-alone mode, the device itself acts as an access point. To operate it via
acomputer (tablet, PC, MAC), you can now establish a direct Wi-Fi connection between
the 151 MK2 and a tablet.
O  O   
There are various options available to you for operating the 151 MK2, including the
supplied remote control, an iPad®or other tablet, or a PC (or Mac). You can create your
ideal operating environment by selecting your preferred device, operating software
(app or web interface) and connection type (Wi-Fi or network cable). The following
sections provide details on the various options.
Operation on the device or using the remote control
The simplest way to operate the 151 MK2 is by using the buttons on the front of the
device or the remote control. You do not need a Wi-Fi connection to the device or
aconnection between the device and your home network in order to operate it in this
way. However, only the basic functions will be available to you in this case. All you will
be able to do is select a music source, control playback, switch the device on or off and
adjust the playback volume. A detailed description of the buttons and functions can be
found in the chapter entitled "Device Overview" on page8.