Burster 9180 User manual

MULTIFUNCTION
DIGITAL PANEL INSTRUMENT
TYP 9180
MODBUS PROTOCOL COMPATIBLE
INSTRUCTIONS MANUAL
Valid for instruments from Firmware BM2.00
MULTIFUNCTION
DIGITAL PANEL INSTRUMENT
TYP 9180
MODBUS PROTOCOL COMPATIBLE
1/2
INSTRUCTIONS MANUAL
Valid for instruments from Firmware BM2.00
4348-BA9180EN-5999-011524
CODE: 30727119 EDITION: 28-09-2010

E U - K o n f o r m i t ä t s e r k l ä r u n g (nach EN ISO/IEC 17050-1:2010)
EU-Declaration of conformity (in accordance with EN ISO/IEC 17050-1:2010)
Name des Ausstellers:
burster präzisionsmesstechnik gmbh & co kg
Issuer’s name:
Anschrift des Ausstellers: Talstr. 1-5
Issuer’s address:
76593 Gernsbach, Germany
Gegenstand der Erklärung:
Digitalanzeiger / DIGILOW
Object of the declaration: Digital Display / DIGILOW
Modellnummer(n) (Typ): 9180 / 9186
Model number / type:
Diese Erklärung beinhaltet obengenannte Produkte mit allen Optionen
This declaration covers all options of the above product(s)
Das oben beschriebene Produkt ist konform mit den Anforderungen der folgenden Dokumente:
The object of the declaration described above is in conformity with the requirements of the following documents:
Dokument-Nr. Titel Ausgabe
Documents No. Title Edition
2011/65/EU Richtlinie zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in
Elektro- und Elektronikgeräten
2011
Directive on the restriction of the use of certain hazardous substances in
electrical and electronic equipment
2014/35/EU Richtlinie zur Harmonisierung der Rechtsvorschriften der Mitgliedsstaaten über
die Bereitstellung elektrischer Betriebsmittel zur Verwendung innerhalb
bestimmter Spannungsgrenzen auf dem Markt
2014
Directive on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within
certain voltage limits
2014/30/EU Richtlinie zur Harmonisierung der Rechtsvorschriften der Mitgliedsstaaten über
die Elektromagnetische Verträglichkeit
2014
Directive on the harmonization of the laws of the Member States relating to
electromagnetic compatibility
EN 61010-1 Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und
Laborgeräte – Teil 1: Allgemeine Anforderungen
2010 +
Cor.:2011
Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 1: General requirements
EN 61326-1 Elektrische Mess-, Steuer-, Regel- und Laborgeräte –
EMV-Anforderungen – Teil 1: Allgemeine Anforderungen
2022
Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements
EN 55011 Industrielle, wissenschaftliche und medizinische Geräte – Funkstörungen –
Grenzwerte und Messverfahren
2022
Industrial, scientific and medical equipment – Radio-frequency disturbance
characteristics – Limits and methods of measurement
Gernsbach 12.01.2023 ppa. Christian Karius
Ort / place Datum / date Quality Manager
Dieses Dokument ist entsprechend EN ISO/IEC 17050-1:2010 Abs. 6.1g ohne Unterschrift gültig
According EN ISO/IEC 17050 this document is valid without a signature.

3
3
INTRODUCTION TO THE SERIES TYP 9180
This catalogue does not constitute a formal
agreement.
A
ll information given in this manual is subject to
change without notice.
The SERIES TYP9180 brings a new phylosophy in digital
panel instrumentation which is expressed by multipurpose,
modular-concept devices providing a rich array of basic
functions and advanced capabilities.
With a fully MODULAR DESIGN, it is possible to implement a
wide variety of applications by only adding the adequate
options.
Intelligence within allows the meter to recognize the options
installed and ask for the necessary parameters to properly
function within desired margins. The basic instrument without
output options omits these data in the program routines.
The instrument's CALIBRATION is made at the factory
eliminating the need for adjustment potentiometers.
Any circuit or option that may need any adjust incorporates a
memory where calibration parameters are stored, making it
possible the optional cards be totally interchangeable without
need of any subsequent adjust.
Custom CONFIGURATION for specific applications can be
made quickly and easily through five front panel keys,
following structured choice menus aided by display prompts
at each programming step.
Other features of the TYP9180 family include:
•CONNECTIONS via plug-in terminal blocks without
screws and CLEMP-WAGO clips cable retention system.
•DIMENSIONS
96x48x120 mm DIN 43700
•CASE MATERIAL UL-94 V0-rated polycarbonate.
•PANEL INSTALLATION by means of single part fingertip
without screws.
To guarantee the meter's technical specifications, it is advised to
check its calibration at periodical intervals according to the ISO9001
standards for the particular application operating criteria. Calibration
should be perfomed at the factory or in a qualified laboratory.
INTRODUCTION TO THE SERIES TYP 9180
This catalogue does not constitute a formal
agreement.
All information given in this manual is subject to
change without notice.
The SERIES TYP9180 brings a new phylosophy in digital
panel instrumentation which is expressed by multipurpose,
modular-concept devices providing a rich array of basic
functions and advanced capabilities.
With a fully MODULAR DESIGN, it is possible to implement a
wide variety of applications by only adding the adequate
options.
Intelligence within allows the meter to recognize the options
installed and ask for the necessary parameters to properly
function within desired margins. The basic instrument without
output options omits these data in the program routines.
T
he instrument's CALIBRATION is made at the factory
eliminating the need for adjustment potentiometers.
Any circuit or option that may need any adjust incorporates a
memory where calibration parameters are stored, making it
possible the optional cards be totally interchangeable without
need of any subsequent adjust.
Custom CONFIGURATION for specific applications can be
made quickly and easily through five front panel keys,
following structured choice menus aided by display prompts
at each programming step.
Other features of the TYP9180 family include:
•CONNECTIONS via plug-in terminal blocks without
screws and CLEMP-WAGO clips cable retention system.
•DIMENSIONS
96x48x120 mm DIN 43700
•CASE MATERIAL UL-94 V0-rated polycarbonate.
•PANEL INSTALLATION by means of single part fingertip
without screws.
To guarantee the meter's technical specifications, it is advised to
check its calibration at periodical intervals according to the ISO9001
standards for the particular application operating criteria. Calibration
should be perfomed at the factory or in a qualified laboratory.

DIGITAL PANEL INSTRUMENT
MODEL TYP9180
DIGITAL PANEL INSTRUMENT
MODEL TYP9180
4
4
Index
1 - TYP9180 model overview ......................................................................................................................................... 6 - 7
1.1 Mode RUN: front-panel description ....................................................................................................................... 8
1.2 Mode PROG: front-panel description ..................................................................................................................... 9
2 - Getting started ........................................................................................................................................................... 10
2.1 Power and connectors................................................................................................................................. 11 - 12
2.2 Programming instructions............................................................................................................................ 13 - 14
2.3 Programming guide ........................................................................................................................................... 15
3 - Programming module 10. Input configuration diagram........................................................................................... 16 - 17
3.1 Program process input. Menu 11 ................................................................................................................. 18 - 20
3.1.1 Connections (V, mA)...................................................................................................................... 21 - 22
3.2 Program load cell input. Menu 12 ................................................................................................................ 23 - 24
3.2.1 Connections (mV/ V) ............................................................................................................................ 25
3.3 Program Pt100 input. Menu 13 .................................................................................................................... 26 - 27
3.3.1 Connections ......................................................................................................................................... 28
3.4 Program thermocouple input. Menu 14 ........................................................................................................ 29 - 31
3.4.1 Connections (J, K, T, R, S, E) ................................................................................................................ 32
3.5 Program potentiometer input. Menu 15............................................................................................................... 33
3.5.1 Connections ......................................................................................................................................... 33
Index
1 - TYP9180 model overview..........................................................................................................................................6 - 7
1.1 Mode RUN: front-panel description........................................................................................................................8
1.2 Mode PROG: front-panel description......................................................................................................................9
2 - Getting started............................................................................................................................................................10
2.1 Power and connectors .................................................................................................................................11 - 12
2.2 Programming instructions ............................................................................................................................13 - 14
2.3 Programming guide ............................................................................................................................................15
3 - Programming module 10. Input configuration diagram ...........................................................................................16 - 17
3.1 Program process input. Menu 11 ..................................................................................................................18 - 20
3.1.1 Connections (V, mA) ......................................................................................................................21 - 22
3.2 Program load cell input. Menu 12 .................................................................................................................23 - 24
3.2.1 Connections (mV/ V).............................................................................................................................25
3.3 Program Pt100 input. Menu 13.....................................................................................................................26 - 27
3.3.1 Connections..........................................................................................................................................28
3.4 Program thermocouple input. Menu 14 .........................................................................................................29 - 31
3.4.1 Connections (J, K, T, R, S, E).................................................................................................................32
3.5 Program potentiometer input. Menu 15 ...............................................................................................................33
3.5.1 Connections..........................................................................................................................................33

DIGITAL PANEL INSTRUMENT
MODEL TYP9180
DIGITAL PANEL INSTRUMENT
MODEL TYP9180
5
5
4 - Programming module 20. Display configuration diagram ........................................................................................ 34 - 35
4.1 Scaling. Menus 21 and 22............................................................................................................................ 36 - 45
4.2 Integrator. Menu 23.................................................................................................................................... 46 - 48
4.3 Display options, Filters and Round ...................................................................................................................... 49
4.3.1 Display options. Menu 24 ..................................................................................................................... 50- 51
4.3.2 Filters. Menu 25.................................................................................................................................. 52 - 53
4.3.3 Round. Menu 26 ........................................................................................................................................ 54
4.4 Automatic volume calculation. Menu 27........................................................................................................ 55 - 58
5 - Front-panel functions and remote inputs
5.1 Front-panel functions ..............................................................................................................................59 and 65
5.2 Remote inputs ................................................................................................................................................... 66
5.2.1 Table of remote input logic functions ................................................................................................... 67 - 69
5.2.2 Program remote input logic functions .......................................................................................................... 70
6 - Programming parameters lockout................................................................................................................................. 71
6.1 Lockout routine.................................................................................................................................................. 72
7 - Output options..................................................................................................................................................... 73 - 74
8 - Technical specifications ........................................................................................................................................ 75 - 76
8.1 Dimensions and mounting .................................................................................................................................. 77
9 - Warranty .................................................................................................................................................................... 78
10 - Declaration of conformity ............................................................................................................................................ 80
ANNEXES. Index................................................................................................................................................................ 82
4 - Programming module 20. Display configuration diagram ........................................................................................ 34 - 35
4.1 Scaling. Menus 21 and 22............................................................................................................................ 36 - 45
4.2 Integrator. Menu 23.................................................................................................................................... 46 - 48
4.3 Display options, Filters and Round ...................................................................................................................... 49
4.3.1 Display options. Menu 24 .................................................................................................................... 50 - 51
4.3.2 Filters. Menu 25.................................................................................................................................. 52 - 53
4.3.3 Round. Menu 26 ........................................................................................................................................ 54
4.4 Automatic volume calculation. Menu 27........................................................................................................ 55 - 58
5 - Front-panel functions and remote inputs
5.1 Front-panel functions .............................................................................................................................. 59 and 65
5.2 Remote inputs ................................................................................................................................................... 66
5.2.1 Table of remote input logic functions ................................................................................................... 67 - 69
5.2.2 Program remote input logic functions.......................................................................................................... 70
6 - Programming parameters lockout................................................................................................................................. 71
6.1 Lockout routine.................................................................................................................................................. 72
7 - Output options..................................................................................................................................................... 73 - 74
8 - Technical specifications ........................................................................................................................................ 75 - 76
8.1 Dimensions and mounting .................................................................................................................................. 77
9 - Warranty .................................................................................................................................................................... 78
10 - Declaration of conformity ............................................................................................................................................ 80
ANNEXES. Index................................................................................................................................................................ 82

ANALOG OUTPUT
OPTION
BCD PARALLEL
OUTPUT OPTION
MULTI-INPUT
CARD
RS232C/ RS485
OUTPUT OPTION
RELAY/ OPTO
OUTPUT OPTION
POWER FILTER
CIRCUIT
CASE WITH
FIXING CLIPS
MAIN CIRCUIT
FRONT
COVER
ANALOG OUTPUT
OPTION
BCD PARALLEL
OUTPUT OPTION
MULTI-INPUT
CARD
RS232C/ RS485
OUTPUT OPTION
RELAY/ OPTO
OUTPUT OPTION
POWER FILTER
CIRCUIT
CASE WITH
FIXING CLIPS
MAIN CIRCUIT
FRONT
COVER
6
9
6
DISPLAY AND
KEYBOARD MODULE
DISPLAY AND
KEYBOARD MODULE

7
7
The TYP9180 model incorporates new technical and
functional characteristics including more filtering
options, software lockout, a variety of programmable
remote inputs and many other performance capabili-
ties that provide an extraordinary flexibility to adapt
to a wide range of indication and control needs.
The TYP9180 model is a digital multifunction instrument
whose input stage admits, as selected by the user the
following configurable input types:
- PROCESS (V, mA)
- LOAD CELL (mV/V)
- Pt100 SENSOR
- THERMOCOUPLE (J, K, T, R, S, E)
- POTENTIOMETER
T
he input card allows direct connection to a wide variety of
transducers, transmitters or primary sensors without need for
changing any component or circuit. The meter's configuration
for a particular input type is made entirely by software.
An optional 8-digit totalizer/integrator accumulates time
dependent quantities using a timebase or either stores batch
readings.
Standard features of the basic instrument include the reading
of the input variable plus a selectable second variable in the
lower display, max and min readings detection, remote hold,
tare operation and a full complement of programmable logic
functions.
Special software capabilities are program lock-out for individual
menus or the entire program parameters, as well as the possibility to
restore factory configuration at any time.
In addition, a variety of plug-in output cards can be installed
at any time to meet further system requirements: analog or
digital control via 0-10V/ 4-20mA or relay/ transistor outputs
and communication via serial RS232C/ RS485 or BCD parallel.
Each option has a separate programming module to configure
relating parameters, which is activated when the card is
installed.
All output options are optoisolated from input signal and
power supply.
The basic instrument is a soldered assembly composed of the
main board, the display and keyboard module, the power
filtering circuit and the multi-input card (see page 6).
1. MODEL
T
YP9180
This instrument conforms to the following directives: EMC 2004/108/CEE and LVD 2006/95/CEE
Caution: Read complete instructions to ensure safety protections.
The TYP9180 model incorporates new technical and
functional characteristics including more filtering
options, software lockout, a variety of programmable
remote inputs and many other performance capabili-
ties that provide an extraordinary flexibility to adapt
to a wide range of indication and control needs.
The TYP9180 model is a digital multifunction instrument
whose input stage admits, as selected by the user the
following configurable input types:
- PROCESS (V, mA)
- LOAD CELL (mV/V)
- Pt100 SENSOR
- THERMOCOUPLE (J, K, T, R, S, E)
- POTENTIOMETER
T
he input card allows direct connection to a wide variety of
transducers, transmitters or primary sensors without need for
changing any component or circuit. The meter's configuration
for a particular input type is made entirely by software.
An optional 8-digit totalizer/integrator accumulates time
dependent quantities using a timebase or either stores batch
readings.
Standard features of the basic instrument include the reading
of the input variable plus a selectable second variable in the
lower display, max and min readings detection, remote hold,
tare operation and a full complement of programmable logic
functions.
Special software capabilities are program lock-out for individual
menus or the entire program parameters, as well as the possibility to
restore factory configuration at any time.
In addition, a variety of plug-in output cards can be installed
at any time to meet further system requirements: analog or
digital control via 0-10V/ 4-20mA or relay/ transistor outputs
and communication via serial RS232C/ RS485 or BCD parallel.
Each option has a separate programming module to configure
relating parameters, which is activated when the card is
installed.
All output options are optoisolated from input signal and
power supply.
The basic instrument is a soldered assembly composed of the
main board, the display and keyboard module, the power
filtering circuit, the and the multi-input card (see page 6).
1. MODEL
T
YP9180
This instrument conforms with the following directives: EMC 2004/108/CEE and LVD 2006/95/CEE
Caution: Read complete instructions to ensure safety protections.

1.1 - RUN MODE: FRONT-PANEL FUNCTIONS
LED HOLD
Indicates display hold
LED TARE
Indicates non-zero
tare value in memory
TARE RESET LIMIT MAX/MIN DATA
ESC ENTER
M
A
X
M
I
N
HOLD
TARE
1
2
3
4
1.1 - RUN MODE: FRONT-PANEL FUNCTIONS
LED HOLD
Indicates display hold
LED TARE
Indicates non-zero
tare value in memory
TARE RESET LIMIT MAX/MIN DATA
ESC ENTER
M
A
X
M
I
N
HOLD
TARE
1
2
3
4
8
8
TARE KEY
Tares the display
RESET KEY
In conjunction with MAX/MIN and TARE,
resets the max, min or tare values.
(load cell: total and batch)
LIMIT KEY
Recalls the setpoint values
MAIN DISPLAY
Reads the variable being measured
KEYBOARD IN RUN MODE
LABEL
Engineering units
MAX/MIN KEY
Recalls peak, valley and tare/offset to the
second display (load cell: total and batch)
DATA KEY
Shows programming data.
Gives access to PROG mode
AUXILIARY DISPLAY
Shows the type of variable being
displayed on the secondary display
LED MIN
Indicates detection of a min reading
LED MAX
Indicates detection of a max reading
TARE KEY
Tares the display
RESET KEY
In conjunction with MAX/MIN and TARE,
resets the max, min or tare values.
(load cell: total and batch)
LIMIT KEY
Recalls the setpoint values
MAIN DISPLAY
Reads the variable being measured
KEYBOARD IN RUN MODE
LABEL
Engineering units
MAX/MIN KEY
Recalls peak, valley and tare/offset to the
second display (load cell: total and batch)
DATA KEY
Shows programming data.
Gives access to PROG mode
AUXILIARY DISPLAY
Shows the type of variable being
displayed on the secondary display
LED MIN
Indicates detection of a min reading
LED MAX
Indicates detection of a max reading

1.2 - PROG MODE: FRON
T
-PANEL FUNCTIONS
TARE RESET LIMIT MAX/MIN DATA
ESC ENTER
M
A
X
M
I
N
HOLD
TARE
1
2
3
4
1.2 - PROG MODE: FRON
T
-PANEL FUNCTIONS
TARE RESET LIMIT MAX/MIN DATA
ESC ENTER
M
A
X
M
I
N
HOLD
TARE
1
2
3
4
9
9
ESC KEY
Exits from the programming mode
without saving changes
KEY
Increments the value of the active digit
SECOND DISPLAY
Indicates which parameter is
being programmed
MAIN DISPLAY
Reads the value of the parameter being programmed
KEYBOARD IN PROG MODE LABEL
Engineering units
KEY
Shifts one digit to the right or moves
around selectable options
ENTER KEY
Validates changes on currently being
programmed parameter and advances
one program step
AUXILIARY DISPLAY
Shows the current program
step number
ESC KEY
Exits from the programming mode
without saving changes
KEY
Increments the value of the active digit
SECOND DISPLAY
Indicates which parameter is
being programmed
MAIN DISPLAY
Reads the value of the parameter being programmed
KEYBOARD IN PROG MODE LABEL
Engineering units
KEY
Shifts one digit to the right or moves
around selectable options
ENTER KEY
Validates changes on currently being
programmed parameter and advances
one program step
AUXILIARY DISPLAY
Shows the current program
step number

10
10
Packing contents
Instructions manual in English, including Declaration of
Conformity.
Digital panel meter model TYP9180.
Accessories for panel mounting (sealing gasket and fixing
clips).
Accessories for wiring connections (plug-in terminal block
connectors with a fingertip key).
Wiring label sticked to the plastic case
Set of labels with engineering units
9 Check the packing is complete.
Configuration
Power supply (pages 11 & 12)
The instruments with 115/230V AC power supply are set
by default for a supply voltage of 230V (USA market 115 V
AC).
The instruments with 24/48V AC power supply are set by
default for a supply voltage of 24V.
9 Check wiring label before applying power to the
instrument.
2. GETTING STARTED
Programming instructions (pages 13, 14 & 15)
The software is divided into several independently
accessible modules for configuration of the input, the
display, the setpoint outputs, the analog output, the
communication output and the logic inputs.
9 Read carefully this section.
Input types (pages 16 & 17)
9 Verify input confi
g
uration before connectin
g
the input
signal.
Programming parameters lockout (page 54)

T
he instrument is shipped from the factory with all
programming levels accessible to the operator.
Software allows selective lockouts of the programming
parameters.
9Lockout is recommended after programming the
instrument.
Packing contents
Instructions manual in English, including Declaration of
Conformity.
Digital panel meter model TYP9180.
Accessories for panel mounting (sealing gasket and fixing
clips).
Accessories for wiring connections (plug-in terminal block
connectors with a fingertip key).
Wiring label sticked to the plastic case
Set of labels with engineering units
9 Check the packing is complete.
Configuration
Power supply (pages 11 & 12)
The instruments with 115/230V AC power supply are set
by default for a supply voltage of 230V (USA market 115 V
AC).
The instruments with 24/48V AC power supply are set by
default for a supply voltage of 24V.
9 Check wiring label before applying power to the
instrument.
2. GETTING STARTED
Programming instructions (pages 13, 14 & 15)

T
he software is divided into several independently
accessible modules for configuration of the input, the
display, the setpoint outputs, the analog output, the
communication output and the logic inputs.
9 Read carefully this section.
Input types (pages 16 & 17)
9
V
erify input confi
g
uration before connectin
g
the input
signal.
Programming parameters lockout (page 54)

T
he instrument is shipped from the factory with all
programming levels accessible to the operator.
Software allows selective lockouts of the programming
parameters.
9Lockout is recommended after programming the
instrument.