Bush Hog 3414 User manual












SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 26
 
 14 ft
 2 1/2 inch diameter
(width x length)14 ft 7 inches x 9 ft 1 inch (Lift), 14 ft 7 inches x 13 ft 5 inches (Pull)
 14 ft 8 inches
 3 Point Cat. II & III Standard & Quick Hitch, Cat. II & III (Semi-Mount) and Center Pull Self Leveling
 2 to 13 inches
 10 gauge
 1/4 x 10 inches
 90 PTO (Lift), 75 PTO (Pull)
 ASAE Cat. 5 (For 540 RPM Lift, Pull and Semi-Mount), ASAE Cat. 4 (For 1000 RPM Pull Models)
 ASAE Cat. 5 Rubber Element or Optional Cat. 4 Shear Pin/Rubber Element
 (3) 205 - Center, 190 - Outboard
 540/1000 RPM
 4 Plate PTO Slip Clutch
 Choice of Manual Height Bundle or Hydraulic
 Straight or Round
 1/2 x 4 inches - Uplift
 15,242 FPM
 Laminated, Pneumatic, Aircraft
 Rubber Cushioned, Choice of Single or Dual on Pull and Semi-Mount Models
 Front Belting and Rear Band, Optional Chains
 Standard for Pull Models
 (Pull with Single Axle) 3383 lbs
 Standard
 Chain Shielding, Shredder Attachment, Third tailwheel for Lift or Semi-Mount Models
 1 year limited warranty with a 5 year gearbox limited warranty