Bush LE-32GKA User manual

Instruction manual
LE-32GKA

You’ll soon be enjoying your new TV.
It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your TV. Should you require any guidance, a
simple solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 604 0105
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

3
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105
Contents
1Safety information
Safety information 6
2Getting Started
TV Features 10
Accessories included 10
Installing/Removing the BaseStand 11
Viewing remote control - TV 12
TV - Control buttons (Right side) 14
Aerial connection 14
Power connection 14
Remote control - Inserting batteries 15
Switching the TV On and Off 15
Operation using TV control buttons 16
3Connections
Left side connections explained 20
Left bottom connections explained 21
HDMI Connections 22
SCART Connections 22
4First time setup
First time setup 26
5How to use your TV
Selecting Input Source 30
Using The Electronic Programme Guide(EPG) 30
Viewing Teletext 32
Using The Time Shift Function 33
Recording DTV Programmes 34
Using The Programme Timer 35
Watching Recorded Programmes 37
6TV systems management
Picture Menu 42
Sound Menu 43
Channel Menu 44
Lock Menu 48
Time Menu 49
Network 51
Setting Menu 51
7Entertainment Features
Using The Usb Features 56
Viewing Movies 57
Listening to music 58
Viewing photos 59
8Other information
Specifications 64
Digital reception 64
Plug replacement - UK and Ireland only 65
Energy label 65
Trouble shooting 44
Supported file formats 45
Disposal information 45
9Product Support
Trouble shooting 68
Supported file formats 69
Disposal information 69
Help and assistance 70
Disposal 71
Guarantee 72

5
Safety information 1

6
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Safety information
Safety information
Important - Please read these instructions fully before
installing or operating
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLEPARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock of persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Power source
• The TV should be operated only from a 100-240V AC,
50 Hz outlet.
• Warning: Do not leave your TV in standby or operating
mode when you leave your house.
Positioning the TV
• For ventilation, please leave a clear space of at least
10cm all around the TV.
10cm
10cm
10cm
• Do not block the ventilation openings.
• Do not place the TV on sloping or unstable surfaces,
the TV may tip over.
• To prevent damage to the TV, do not place any objects
on top of the TV.
• Only use the TV in moderate climates.
Power cord and plug
• The power cord plug should be easily accessible. In
case of storms and lightning, when going on holiday,
or when the TV is not used for a long period of time
disconnect the power cord from the mains power
socket.
• Do not place the TV, furniture, etc. on the power cord
or pinch the cord.
• Handle the power cord by the plug, do not unplug the
TV by pulling the power cord.
• Never touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.
• Never make a knot in the power cord or tie it with other
cords.
• Power cords should be placed in such away that they
are not likely to be stepped on or driven over.
• A damaged power cord/plug can cause fire or give you
an electric shock. When damaged it must be replaced,
this should only be done by qualified personnel.
Moisture and Water
• Do not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, and near the
washing machine).
• Do not expose this TV to rain or water, as this may be
dangerous.
• Do not place objects filled with liquids, such as
flower vases, on top of the TV. Avoid from dripping or
splashing.
• If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Ventilation
• The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation.
• To prevent overheating, these openings must not be
blocked or covered in anyway.

7
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information
Heat sources and Flames
• Do not expose the TV to direct sunlight or other heat
sources.
• The TV should not be placed near to open flames and
sources of intense heat such as an electric heater.
• Ensure that no open flame sources, such as lighted
candles, are placed on top of the TV.
Headphone volume
• Excessive sound pressure from earphones and
headphones can cause hearing loss, please take care.
Wall mounting (optional)
To prevent injury, this TV must be securely attached to the
wall in accordance with the installation instructions (if the
option is available).
LCD Screen
• The LCD screen is a very high technology product
with about a million thin film transistors, giving you
fine picture details. Occasionally, a few non-active
pixels may appear on the screen as a fixed blue, green
or red point. Please note that this does not affect the
performance of your product.
• Take care not to scratch the screen with fingernails or
other hard objects.
Cleaning
• Before cleaning, unplug the TV from the wall socket.
• Do not use liquid or aerosol cleaners. Only use a soft,
dry cloth.
Batteries
• Warning: Incorrect installation of batteries may cause
battery leakage and corrosion, resulting in damage to
the remote control.
• Do not mix old and new batteries, or
batteries of different types.
• Do not dispose of batteries in a fire.
• Do not dispose of batteries with normal household
waste, take to a local recycling centre.
Replacement parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorised
substitutions may result in fire, electrical shock or other
hazards.
Servicing
• Warning: Risk of exposure to radiation from class 1/
class 3b visible and invisible laser beams. Do not open
the TV and stare directly into beam.
• Warning: Risk of electric shock, do not attempt to
repair, service or modify this TV yourself. Contact the
manufacturer, their approved service agent or the
Customer Helpline: 0345 604 0105 .
This equipment is a Class II or double insulated electrical
appliance. It has been designed in such a way that it
does not require a safety connection to electrical earth.
• Warning: To prevent the spread of fire,
keep candles or other open flames
away from this product at all times.
Safety information
Important - Please read these instructions fully before
installing or operating

9
Getting Started 2

10
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting Started
You’ll be up and running in no time
Getting Started
TV - Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
• USB input.
• 100 programmes from VHF, UHF (analogue).
• 400 programmes for digital mode (DTV).
• OSD menu system.
• Scart socket for external devices (such as video, video
games, audio set, etc.).
• Stereo sound system.
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• AVL (Automatic Volume Limiting).
• PLL (Frequency Search).
• PC input.
• Plug & Play for Windows 98, ME, 2000, XP, Vista.
Accessories included
TV Remote Control
Batteries: 2 x AAA
MINI YPBPR Cable MINI AV Cable
Stand Base Screws (4PCS)
Instruction Book

11
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting Started
You’ll be up and running in no time
Getting Started
Installing / Removing the Base Stand
Base Stand Assembly Instruction
1. Place the TV with the display side down on a flat
surface.Use a cloth to protect. Locate the bottom at
the stand.
2. Fix the stand base to the TV with the 4PCS provided
screws.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts, 50/60
Hz power supply. Never connect straight to a DC power
supply.
Locate the TV in a room where light does not strike the
screen directly. Total darkness or a reflection on the
screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
WALL MOUNTING INSTALLATION GUIDELINES
This television can be wall mounted as follows:
1. Place the LED LCD Television onto a solid surface.
Please place some soft material over the front of the
screen to protect it from any damage.
2. Remove the screws (4PCS) from the lower part of the
television, where the base joins to the TV, and take
away the stand (put the stand somewhere safe for
future use).
3. Use the 4PCS provided screws to fix the TV onto a
wall mounting bracket (not included) via the four
VESA standard holes on the back of the television.
200 x 200mm VESA mount

12
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting Started
You’ll be up and running in no time
Getting Started
Viewing remote control - TV
1 . :Switch the TV between on and standby mode.
2 . MUTE:Mutes and restores your TV sound.
3 . 0-9 Number Button:Use to select a programme.
(ATV/ DTV mode)
4. CH.LIST:Display programme list. (ATV / DTV mode)
5. :Go back to the previous viewing channel.
(ATV/ DTV mode)
6. MENU:Display the main menu
7. SOURCE:Select among the dierent input signal
sources:DTV / Analogue TV / Composite/AV / SCART/
Component /YPbPr / HDMI 1 / HDMI 2 / HDMI 3 /
HDMI 4.
8. OK:Confirm the selection.
:Allows you to navigate through the OSD
menu and adjust the TV ‘s settings to your preference.
9. RETURN:Return to previous menu.
10. EXIT:Exit the OSD menu.
11. EPG:Display the Electronic Program Guide (DTV mode).
12. VOL+/-:Adjust the volume.
13. CH / :Select a channel.
14. /RECORD:One button recording function,press
to record current program (DTV mode).
15. : Start or pause playback (USB / DTV modes).
TIMESHIFT: Press to turn the timeshift function on and
o (DTV mode).
16. : Press to skip to the beginning of the previous
chapter or track (USB / DTV modes).
TTX: Turn on and o the teletext function.
(ATV/DTV Modes)
17. : Press to skip to the beginning of the next
chapter or track (USB / DTV modes).
HOLD: Press to freeze a multi-pageTeletext passage
on screen (DTV / AV / SCARTmodes).
18. : Press to fast rewind (USB / DTV modes).
CANCEL: Press to cancel the Teletext mode
(DTV / AV / SCART modes)
19. : Press to stop playback (USB / DTV /ATV modes).
FAV: Press to show your Favourite Channels list
(DTV / ATV modes).
20. : Press to fast forward (USB / DTV modes).
REVEAL: Press to reveal hidden information such as
answers to aquiz on Teletext(DTV /AV / SCART modes) .
21. RED / GREEN / YELLOW / BLUE: Use these buttons
to select corresponding function shown on screen and
in menus.
22. INDEX: Press to select the page number of the index
from Teletext (DTV mode).
23. SUBPAGE: Press to display the subpage on the Teletext
screen (DTV / AV / SCART modes).

13
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting Started
You’ll be up and running in no time
Getting Started
Viewing remote control - TV
24. SIZE:Press to enlarge the picture on the TV Teletext
(DTV / AV / SCART modes).
25. LANG:Select the DTV audio language (DTV mode).
:Press to switch between dierent audio languages
(only applicable when the broadcast supports this
function).
26. SUBTITLE: Press to display information about the
current screen such as current channel or input source.
27. DISPLAY:Press to show information about the current
screen such as current chanel or input source.
28. ASPECT:Select from the following settings:
Auto/ 4:3 / 16:9 / Zoom 1 / Zoom 2.
29. FREEZE:Freeze the picture.
30. TV.RD:Press to select between TV and Radio
programs(DTV mode).
31. P.MODE:Press to select picture mode.
32. S.MODE:Press to select select sound mode.
33. SLEEP:Press to set TV’s sleep timer.

14
Getting Started
You’ll be up and running in no time
TV - Control buttons (Right side)
4. CH / button
Press to select a channel.
5. VOL +/- button
Press to adjust the volume.
1. ( )button
Switch the TV between On / Standby mode.
2. SOURCE button
Press to select among different input signal sources.
3. MENU button
Display the OSD (on screen display) menu.
Aerial connection
Connect the “aerial” or “cable TV” plug to AERIAL INPUT
(ANT.) socket located on the back of the TV .
Power connection
Please note: After unpacking, allow the TV to reach
ambient room temperature before connecting the TV to
the mains power socket.
Connect the power cord plug to the mains power socket.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting Started

15
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace the
battery cover.
Note: When the remote control is not going to be used
for long periods of time, the batteries should be removed.
Otherwise the remote control may be damaged, caused
by battery leakage and corrosion.
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket and TV in ‘Standby’ mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the “ ” button.
b: The TV; Press the “ ” button at the
bottom of the TV.
Switching the TV Off
Either press the “ ” button on the remote
control or press the “ ” button at the bottom of the TV,
the TV will then switch to standby mode.
Getting Started
You’ll be up and running in no time
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting Started
Push open Close
Note the correct
polarity (+ or -).

Getting Started
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Operation using TV control buttons
The VOL+/VOL- buttons will function as volume up/
down as default. Even if you set other functions for these
buttons, the VOL+/VOL- buttons will return to volume
control after a short while.
Volume Setting
Press VOL+/VOL- buttons to increase or decrease
volume.
Programme Selection
Press CH+/CH- buttons to select the next or previous
programme.
The remote control is designed to control all the functions
of the model you selected.
Volume Setting
Press VOL+ button to increase the volume. Press VOL-
button to decrease the volume. A volume level scale (slider)
will be displayed on the screen.
Programme Selection (Previous or Next Programme)
Press CH- button to select the previous programme.
Press CH+ button to select the next programme.
Programme Selection (Direct Access)
Press number buttons on the remote control to select
programmes between 0 and 9. The TV will switch to the
selected programme.
Getting Started
You’ll be up and running in no time
16

19
Connections 3

20 Connections
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Connections
Bringing it all together
Left side connections explained
1. LAN
Network connection port.
2. HDMI Inputs
Connect to a High-Definition(HD) signal output device.
3. SCART Socket
Connect to SCART cable between the SCART socket
on the TV and the SCART socket on the external device
(decoder,or DVD player).
4. PC AUDIO Input
Connect to a computer audio output.
5. VGA Input
Connect to a computer or other devices with a VGA
interface.