Bushnell 201740 User manual

1
Model: 201740 ENGLISH/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO 1016

CONTENTS
English
Français
Español
Deutsch
Italiano
3–14
15–26
27–38
39–50
51–62

3
 - Bushnell®Pro X - Laser Rangender
Congratulations on your purchase of the Bushnell® Pro X Laser Rangender, our top of the line laser rangender for
golfers and used by more golf professionals than any other brand. e Pro X is a precision Laser Rangending optical
instrument designed to provide many years of enjoyment. is booklet will help you achieve optimum performance
by explaining its adjustments and features as well as how to care for this precise laser rangending optical instrument.
To ensure optimal performance and longevity, please read these instructions before using your Pro X.
INTRODUCTION
Your Bushnell® Pro X is an advanced premium laser rangender comprised of Digital Technology and turbo
processors allowing range readings from – yards / – meters, and combines the best of a premium compact
monocular with the new Dual Display Technology™. Measuring . x  x  inches, the -ounce Pro X with nd
Generation E.S.P.™ (Extreme. Speed. Precision.) delivers extremely fast acquisition and incredible ½ Yard accuracy
and / precision from – yards and +/-  yard Accuracy from – yards. e Pro X features PinSeeker™
technology with JOLT, allowing the golfer to easily and quickly “zero” in on the ag without acquiring background
targets, and Superb Optical Quality.
x Magnication
Rubber Armored Metal Housing Adjustable
Diopter Setting
Adjustable
Posi-Thread™
Battery Door
PinSeeker™ with Jolt
Mode
E.S.P.™ - Extreme. Speed. Precision.
• Gen  Turbo Processor Provides Faster Acquisition
• Provides / Yard Accuracy; / Precision from – Yards
Dual Display Technology™
Mode Button (“B”Logo)
Dual Display Technology™
Power Button
ENGLISH
Slope Switch
(see pg. )

4
HOW OUR DIGITAL TECHNOLOGY WORKS
e Pro X emits invisible, eye safe, infrared energy pulses. e Pro X Advanced Digital microprocessor and ASIC
chip (Application-Specic Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated
digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the
rangender, to the target, and back.
RANGING ACCURACY
e ranging accuracy of the Pro X is plus or minus one yard / meter under most circumstances. e maximum range
of the instrument depends on the reectivity of the target. e maximum distance for most objects is  yards / 
meters while for highly reective objects the maximum is  yards /  meters.
Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental
conditions at the time the distance of an object is being measured. The color, surface finish, size and shape of the target all affect reflectivity and range.
The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the least reflective
color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle to the target also has
an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted energy pulses) provides
good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the
ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease
the unit’s maximum range.
E.S.P.2™ (Extreme. Speed. Precision. 2nd generation), our advanced second generation ranging technology, provides the fastest, most accurate ranging
measurement based on target conditions. The laser analyzes multiple individual measurements to the target and calculates and displays the best possible
result. Target variations such as reflectance, shape and color can affect the accuracy of a laser measurement, but E.S.P.2™ automatically assesses the
conditions and improves the measurement up to 1/2 Yard Accuracy whenever possible from 5–125 yards. When this occurs, display readout precision will
be refined to 1/10th yard. For those who prefer their distances displayed in whole units (full yard or meters), E.S.P.2™ can be disabled in the Setup Menu.

5
DUAL DISPLAY
TECHNOLOGY
GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Pro X, depress the power button once to activate the display. Place the aiming circle
(located in the center of the eld of view) upon a target at least  yards away, depress and hold the power button down
until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming circle
indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. e
crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is no
longer being transmitted).
Note: Once activated, the display will remain active and display the last distance measurement for 7 seconds. You can depress the power
button again at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long
periods of time with magnified lenses. The maximum time the laser is transmitted (fired) is 7 seconds. To re-fire, press the button down
again.
ADJUSTING THE EYEPIECE
e Pro X is equipped with an adjustable eyepiece (+/-  Diopter Adjustment) that allows
you to focus the display relative to the image. Simply rotate the eyepiece until the display
is in focus.
DUAL DISPLAY (SELECTING RED OR BLACK DISPLAY)
e Pro X features Dual Display Technology, which lets you easily toggle between a
bright red display featuring VDT (Vivid Display Technology) or a crisp black display,
based on lighting conditions or your preference. To toggle between red and black displays,
briey press and release the round “B” logo plate on the left side of the unit.

6
SLOPE-SWITCH TECHNOLOGY
Slope-Switch Technology lets the golfer easily turn Bushnell’s patented Slope function on and o. is allows the
golfer to conveniently utilize Slope to get compensated distances around the course when they want it and have a
USGA conforming device that is legal for tournament play when they need it.
DISPLAY INDICATORS
Your Pro X display incorporates the following illuminated indicators:
PinSeeker™ Indicator (1)
Aiming Reticle (2)
Battery Life Indicator (3)
Active Laser (4)
Distance Displayed in Yards/Meters ()
Slope Compensated Distance ()
BATTERY LIFE INDICATOR
Battery Indicator:
Full charge
/ battery life remaining
/ battery Life remaining
Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.
103
PinSeeker beyond E.S.P range— 20196, 205107, 205108
PinSeeker & E.S.P—201960
PinSeeker & E.S.P“Play-As”PinSeeker Slope & E.S.P






110

7
INSERTING THE BATTERY
Remove the Posi-read™ battery door by lifting the battery door tab and then rotating counter clockwise.
Insert a CR2 3-volt lithium battery into the compartment negative end rst, then replace the Posi-read™
battery door.
Note: It is recommended that the battery be replaced at least once every 6 months.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. e crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
PINSEEKER™ WITH JOLT ®
Ever have trouble getting distance to the ag? is advanced mode allows easy acquisition of the ag without
inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.
For ease of use, the device will always be in PinSeeker™Mode.
To use, align the aiming circle reticle onto the ag that you want distance to. Next, press and hold the power button
and move the laser slowly over the ag or desired object until a circle surrounds the ag indicator. If the laser beam
recognized more than one object (i.e. ag and background trees), distance of the ag will be displayed and a circle will
surround the PinSeeker™ indicator informing the user that distance to the ag (i.e. closer object) is being displayed.
e Jolt Technology provides two short bursts of vibration to conrm that the distance displayed is to the ag. ere
may be times when only the laser beam only sees one object in its path. In this case, the distance will be displayed, but
because more than one object was not acquired, a circle will not surround the ag indicator.
Tip: While pressing the Power button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that
you are only displaying the closest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last mode used.

8
PINSEEKER™WITH SLOPE +/™
When slope is enabled by sliding the slope switch on the side of the unit up
until “SLOPE” is visible, Bushnell’s patented Slope Technology is displayed.
e Slope +/- mode will automatically compute an angle compensated range
based upon distance and slope angle determined by the laser rangender and
built-in inclinometer. is data is then combined with internal algorithmic
formulas dealing with average club use and ball trajectories. e angle
compensated range provides direction on how to play the shot (i.e. add
distance if an incline, subtract distance if a decline). Slide the slope switch
back down out of slope mode, and your Pro X now conforms to USGA Rule
-, with the slope angle compensated ranging feature removed.
HOW TO USE SLOPE +/™
Once in this mode, you will see a “ - - - ” in the eld of view informing you that you are in the Slope +/- Mode. Press
the Power button to obtain distance to the ag or other objects. Once the range is displayed, release the Power button.
Once you have released the power button, a degree of angle and compensated range will be displayed beneath the
standard distance.
In the example on the next page, the true distance is  yards, slope is + degrees,
and the compensated (“play-as”) range is  yards. e display would show this:

9
THE ADVANTAGE OF SLOPE +/™
e distance to ag A in the drawing below is  yards. It is also  yards to ag B although it is on a slope. However, if you
were to play this hole as  yards, the ball (X) would fall short of the hole/ag because you did not take slope into account.
DISPLAYBRIGHTNESSV.D.T.
e Pro X has Vivid Display Technology. is bright red LED display dramatically improves contrast, clarity, and
light transmission while increasing brightness of the digital readout, making distance readings legible in low light
environments. ere are four intensity settings to choose from and this is the rst setting within the SETUP menu.
Hold the Mode button (“B” logo on side of device) for  seconds to get into the SETUP menu. e existing
brightness setting will be ashing (i.e. BRT1, BRT2, BRT3, or BRT4). Pressing the Mode (“B” logo) button will toggle
between the four brightness settings. “BRT1” is the lowest intensity while “BRT4” is the brightest. Simply press the
Mode button until the desired brightness setting is displayed, then press and release the Power button to save the
setting.
SETUPMENU/ MODEBUTTON
162 YARDS
162 YARDS
X
4°
Slope-Switch
Technology

10
UNIT OF MEASURE OPTIONS
e Pro X can be used to measure distances in yards or meters. e
unit of measure indicators are located in the lower right portion of
the display. ere are two measuring settings to choose from and this
is the second setting within the SETUP menu. Look through the
eyepiece, depress the Mode button (“B” logo) and hold it down for
approximately  seconds to get into the SETUP menu. Brief presses
of the Mode button will toggle through the brightness settings if
the bright red LED display is selected. Press the Power button to go
to the Unit of Measure options, and again briey press the Mode
button to select your preference. A change in unit of measure will be
indicated by the illumination of the Mfor meter indicator while the
Yfor Yard indicator is turned o. If you are changing from meters to
yards, the opposite will occur. e Pro X will return to the last unit
of measure setting used each time the unit is turned on.
E.S.P.™ ON/OFF
e Pro X distance readout to a tenth of a yard/meter (E.S.P. feature) can be enabled/disabled per user preference.
With “ESP O” selected (E.S.P. disabled), distances will be indicated only in whole yards/meters. With“ESP On”
selected (E.S.P. enabled), distances will be indicated to a tenth of a yard/meter.
MENU OPTION SETTINGS
Display Brightness BRT1
BRT2
BRT3
BRT4
Unit of Measure Y (Yards)
M (Meters)
ESP (1/10 units) ESP On
ESP Off
Enter SETUP menu: long press on Mode (“B”) button
While in the SETUP menu:
• Select setting for option: short press on Mode button
• Save setting: short press & release of Power button
• Select next menu option: short press on Power button
Exit SETUP menu: long press on Mode button, or let power
time out