Buspro HDL-MWM70-RF.12 User manual

User Manual
Wireless Motorized Curtain
HDL-MWM70-RF.12
www.hdlautomation.com

User Manual
HDL-MWM70-RF.18
Wireless Curtain Motor – User Manual
Document updates:
Version
Date
Description
V1.0
2015.09.05
Finish new document

User Manual
HDL-MWM70-RF.18
Wireless Curtain Motor – User Manual
INDEX
1. Overview....................................................................................................................................................................1
1.1 General Information...................................................................................................................................... 1
1.1.1 Description.......................................................................................................................................... 1
1.1.2 Serial Numbers...................................................................................................................................1
1.2 Function Qualities Description.................................................................................................................... 1
1.3 Device Description........................................................................................................................................ 2
2. Technical Data.......................................................................................................................................................... 3
3. Curtain Rail Installation........................................................................................................................................... 4
3.1 Characteristic................................................................................................................................................. 4
3.2 Notice...............................................................................................................................................................4
3.3 Connecting......................................................................................................................................................5
3.4 Curtain Rail Accessories.............................................................................................................................. 5
3.5 The dimensions of ceiling bracket.............................................................................................................. 6
3.6 Installation steps............................................................................................................................................ 6
4. Curved Rail................................................................................................................................................................9
5. Software Configuration......................................................................................................................................... 10
5.1 Workflow........................................................................................................................................................10
5.2 Wireless Setting via Mesh Gateway.........................................................................................................10
5.3 Confirm motor running mode.....................................................................................................................11
5.4 Testing for Installation (very important)....................................................................................................12
5.5 Set position for open and close.................................................................................................................13
5.5.1 Position open setting....................................................................................................................... 13
5.5.2 Position close setting.......................................................................................................................14
5.6 Set the drag mode.......................................................................................................................................15
5.7 Set curtain’s action after power on........................................................................................................... 16
5.8 Control Way.................................................................................................................................................. 16
5.8.1 Dry Contact Control......................................................................................................................... 16
5.8.2 Panel Control.................................................................................................................................... 17
6. FAQ.......................................................................................................................................................................... 18
7. NOTES.................................................................................................................................................................... 20

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 1
1. Overview
1.1 General Information
1.1.1 Description
HDL-MWM70-RF.12 is the wireless curtain motor, which is configured by mesh gateway. It can control
the curtain to open, close, stop and percentage control. And it has over load protection and over heat
protection.
1.1.2 Serial Numbers
1.2 Function Qualities Description
Test the distance of the curtain automatically
Manual mode: long drag, short drag, drag no action
Percentage control
Communication: wireless
Support online upgrading
Support easy programming
Built-in new generation clutch, precise planetary reduce, noise level 40dB.
Dry contact switch, it can control the curtain to open, close, stop.
Be suitable for all small to medium-scale curtain applications, linear and arched, one-and two-side
opening
MWM70-RF.12
Master
MWM70S.12
Slave

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 2
1.3 Device Description
LED Indicator
Function
LED status
enter into the status
exit the status
Working fine
LED turns ON 1 time
per 2s
－－
－－
Modify the address
of motor
LED turns on
long press the button 3s
long press the button 3s
/ no operation 2minutes
Testing for
installation
LED turns OFF 1 time
per 2s
long press the button 5s
long press the button 5s
/ no operation 20minutes
Easy programming
LED Turns OFF 2 times
per 2s
long press the button 10s
long press the button 10s
/ no operation 20minutes
Wireless setting
LED flashes
Press the button 3 times
continuously
Press the button 1 time/ no
operation for 4 minutes
Note: the above operations are carried out in normal work.
Motor terminal: Pull the latch to unlock direction,
and then insert the motor terminal into the C-Driver
Unit. Then, put the latch into the locked hole.
Motor terminal
○
a
LED Indicator
○
b
Programming button
○
c
Antenna
○
d
AC220V power line, 1 meter (Brown for L, Blue for N, Y/G
for PE)
○
e
RJ11 6P network port, it supplies the working voltage for
slave motor
○
f
Dry contact switch, control the curtain to open, close,
stop（COM+FROW is open, COM+REV is close, COM+STP
is stop）
○
a
○
b
○
c
○
d
○
e
○
f
70mm
50mm
284mm

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 3
2. Technical Data
Electric Parameters:
Rated voltage
AC220V 50Hz
Voltage range
AC220V±20% 50HZ
Slave interface
6P internet port
Rated power
70W
Rated torque
1.0Nm
Rated speed
112rpm
Rail belt speed
16cm/s
Communication
Wireless
Wireless transmit power
+10dbm
Wireless receive sensitivity
-90dbm
Indoor communication distance
30m(barrier free)
RSSI receive signal intensity
>-80dbm
Wireless central frequency:
(China) WPAN
780MHz to 786MHz
(Europe) SRD
864MHz to 870MHz
(North America)
904MHz to 928 MHz
Default band
780MHz
Default PSK
HDL-SecurityKey0
Environmental Conditions:
Working temperature
-5℃~45℃
Working relative humidity
<95%
Storage temperature
-20℃~+60℃
Storage relative humidity
<93%
Approved:

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 4
CE
RoHS
Production Information:
Dimensions
284×70×50（mm）
Weight
1352g
Housing material
ABS, aluminum
Installation
Wall hanging
Protection
IP41
Insulation
E
3. Curtain Rail Installation
3.1 Characteristic
AC power input, make the operation more stable and reliable
Built-in a new generation of clutch, system operating noise no more than 40dB
The curtain’s horizontal pull reaches 8KG
3.2 Notice
Read all instructions in detail before use
Non-Contact with the liquids or inflammable gas and object when using
Make sure there is no short-circuits or wiring errors before power on
Power off before install and uninstall
When install the motor to the drive unit, please check and make sure that the latch has switched back
to the locket position.
After the installation, please don’t pull the curtain forcibly, don’t put any additional weight on the
curtain rail; please don’t climb the curtain or hang anything on it; otherwise the rail and the motor will
fall down then lead to personal injury and product damage
Pay attention to water-proof, steam-proof
Please use the dry cloth to wipe when cleaning, can’t use the damp or corrosive stuff for wiping
Has any abnormal situation, please stop the operation and turn off the power, then contact with the
technical service or our company

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 5
3.3 Connecting
Please follow the connecting showed below strictly.
Master, Slave:
The Master is connected to the Buspro port and AC220V, and it provides DC12V to the Slave by the
RJ11 6P6C. HDL provides the RJ11 cable is 1 meter.
Ceiling Bracket’s mounting distance：
On the top of rail, recommend every 600 mm installing a Ceiling Bracket.
3.4 Curtain Rail Accessories
Hook Unit Belt Roller Runner Fixture Rubber
Ceiling Bracket Insertion Clamp Carriers and its handles
RJ11 6P6C Track Joiner
Rail
Drive Unit
Ceiling Bracket
Drive Unit
Latch
Carrier
Fixed Hole
Hook Unit
Roller Runner
Ceiling Bracket
RJ11 Cable
RJ11 Cable

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 6
3.5 The dimensions of ceiling bracket
3.6 Installation steps
a) The length of the rail and the belt need to customize according to the size of the window.
b) Turn to the reverse side of the rail, put the Track Joiner to the rail.
c) Turn to the forward side of the rail. Take the Belt, thread it into one of the rails (left side), drag it to the
Drive unit, then pull it out. At the end of the Belt, insert the Clamp1, then plug the Fixture1.
Motor Motor Base Socket Master Slave
Drive Unit and Roller Runner Drive Unit and Hook Unit Motor Lock
Clamp1
Fixture1
left part
Track Joiner

User Manual
HDL-MWM70-RF.12
Wireless Curtain Motor – User Manual 7
d) Adjust the Belt’s position of the Fixture1 (as shown in figure), and insert the Clamp2 to the other side
of the belt, next to the Fixture1.
e) Adjust the Belt’s position, insert the Clamp3 between the Fixture1 and the Clamp2, next to the
Clamp2.
f) Adjust the Belt’s positions according to the figure, put the Carrier1 onto the Clamp2、3, its handle
should point to the Fixture1.
g) Thread the other side of the belt into the right path rail, drag it to the Drive unit, then pull it out. At the
same time, push the carrier1 into the rail.
h) At the end of the belt, insert the Clamp4, then plug the Fixture2.
i) Adjust the belt, make the Fixture1 and Fixture2 closer, and place the Rubber (the Rubber can buffer
the collision between two Handles of the Carrier)
Fixture2
Carrier1
Clamp4
Carrier1
carrier1
Fixture1
Clamp2
Clamp3
Clamp2
Fixeture1
Clamp3
固定卡 1
Clamp2
Fixture1
Fixture1
固定卡 1
固定卡 1
carrier1
carrier1
Fixture1
Fixture1
left part
left part
left part
left part
right part
left part