buzztv XRS 4900 User manual

REDEFINING TV
USER MANUAL
XRS4900

1
AV Connection
a. Connect the AV cable of the 3
color (red/ white/yellow) to the
XRS4900’s AV output interface, and
the other end to the TV’s AV input
interface. Connection can be made
by colour.
b. Power on the XRS4900. Set the TV
video mode to AV input.
HDTV Connection
a. Connect HDMI cable to the XRS4900’s
output interface, and the other end to
the TV’s HDMI input interface.
b. Power on the XRS4900. Set the TV
video mode to HDTV input.
2CONNECTION
PACKAGE CONTENTS
XRS4900
Device
HDMI
Cable
Remote
Control
Power
Adaptor
DC 12V
AV HDMI
OPTICAL
ETHERNET

4TROUBLESHOOTING
Warning: Under no circumstances should you try to repair the XRS4900 by yourself, as this will invalidate the warranty.
Do not open it as there is a risk electrical shock. If any fault occurs, please first check with this troubleshooting
checklist. If you are unable to remedy a problem by following this guide, contact your dealer for help.
The TV box does not
respond to the remote
control
• Aim the remote control directly at the sensor on thefront of the TV box
• Reduce the distance to the TV box
• Replace batteries in the remote control
• Possibility of system crash, disconnect and reconnect the power supply
No sound or
distored sound
• Adjust the volume
• Check that the speakers are connected correctly
No Picture • Re-Connect the HDTV cable or AV cable
• Check if the TV is powered on
No Power • Check if the power adapter is properly connected to the power and the TV box
• Press the power on the remote controller to turn on the power
No sound during playback • The audio codec may not be supported by the TV box
• Check the volume
The contents of the USB or
flash drive cannot be read
• The USB or flash drive format is not compatable with the box
• If one of the USB can not be read, please turn o the TV box for
30 seconds and restart the TV box
Slow operation of the
USB flash drive
• Large file size or high resolution USB flash drive takes longer time to read
and display on the TV screen
The TV screen is blank and
the player LED is blinking
• Turn o the TV box, wait 30 seconds and turn on again
• Check if HDTV connection is correct or try changing the HDTV cable
Problem Solution
3INSTALLATION STEPS
1. Connect XRS4900 TV Box to the power supply.
2. Connect XRS4900 to your TV with an HDMI Cable or AV Cable.
3. For a wired connection, plug-in an Ethernet cable from the TV Box to your modem or
router. For wireless, choose your Wi-Fi network and input your Wi-Fi password.

TV Power Button
STB - Standby. Power ON/OFF
Source
Source Volume + / Volume -
Favourite Channels
To view categories when in Live TV/
EPG/TV Series/VOD Menus
Search
Rewind
Play/Pause
Fast Forward
Record
Stop
Server Settings
Video On Demand
TV Series
Personal Video Recorder
Menu
Back
Arrow Keys / OK
Information
Last Channel
Live TV
Home
Guide
Volume - Up (+) / Down (-)
Pointer
Mute
Channel - Up (+) / Down (-)
Number Pad
Page Down Page Up
Red Button
Green Button
Yellow Button
Blue Button
5REMOTE + BUTTON LIST

Learning Remote Feature
Learning methods please see as below:
1. Long Press the "TV Power" + “Source" keys on the RCU at the same time
for 3 seconds until the Blue LED turns solid Blue.
The RCU has now entered learning mode.
2. Press the key on the RCU to be programmed, for example "TV Power" Key,
the Blue LED will start blinking.
3. Aim the TV RCU that you want to learn from towards the front of the RCU
(Distance less than 3cm).
Press the button on the TV RCU that you want the BT-100 RCU remote to learn
from. If the BT100 RCU is programmed correctly the Blue LED on the BT-100 \
RCU will blink 3 times then turn solid Blue.
This will indicate that you have programmed it properly.
4. Repeat Steps 2-3 for the "Source" button.
5. Short press "TV Power" key + "Source" key at the same time on the BT-100 RCU to
exit learning remote.
7SATA DRIVE (Oponal)
Installing Sata Drive:
1. Remove bottom plate (A)
2. Orientate the 2.5 Sata
connectors (B) to the
corresponding connector
on the XRS4900 and attach
3. Replace bottom plate
A
B

7LIGHTS & INDICATORS
Lighting on Front of XRS4900
indicates the following:
Blue light - Unit is on
Red light - Unit is o
8PAIRING RCU (REMOTE) AND XRS4900
9WARRANTY INFORMATION
For warranty information and registration, please visit:
www.buzztv.com/register
www.buzztv.com/support
[e-mail]
How to put RCU into Pairing Mode for BT
Press “OK” + “VOL - ” for 3 seconds until Red LED “breathing on”. RCU enters
pairing mode. Device name is BuzzTV BT-100. You will need to have the STB
searching for BT in order to fully pair the remote.
How to turn the Back lit Feature On/O
Long press the blue button on the bottom right of the remote for 5+ seconds. This
will turn the back lit feature on/o (illuminates for approximately 5 seconds when on).