2
NOTE: To guarantee the ENVIROMONITOR
operates safely, please use the appropriate DC
wire with UL2468 #24AWG spec.
SNMP-RC210 Connection
Connect the supplied network cable from the
communication port of the ENVIROMONITOR
to the RS-232 port of the SNMP-RC210. Use
another network cable to connect from the
RJ45 port of the SNMP-RC210 to LAN.
(Refer to Image 3)
NOTE: If the supplied network cable is not
long enough for your application, you may
substitute another longer cable (do not exceed
50 feet). After making the connection, a green
LED will light up and the unit will start to
operate.
Software Installation
After the unit is connected, please follow the
steps below to install PowerFrame Business
monitoring software from the internet.
1. Go to bxterra.com/downloads
2. Click PowerFrame Business software to
download the software
3. Follow the on-screen instructions to install
the software
4. When your computer restarts, the
monitoring software will appear as a
shortcut on your desktop and in the
system tray, near the clock
INSTALLATION CONTINUED... POWERFRAME OPERATION
Image 3
Step 1:
Double click the “PowerFrame”
icon to launch the software.
Step 2:
PowerFrame Business will
be automatically activated.
Select “SNMP Manager” by
right-clicking PowerFrame
Business icon in the
task tray.
Step 3:
The SNMP Manager will automatically
search the local network for bXterra SNMP-
RC210 cards and display the list of results in
the top-left of the SNMP Manager window.
Step 4:
After the SNMP-RC210 card is
successfully detected, select
“Open Monitor” by right-
clicking the PowerFrame
Business icon in the task
tray.
Step 5:
When launching the PowerFrame Business
software, click the “Environmental
information”tab to view the status of your
UPS.
Image 2
