BZB Gear BG-UM-88ANS User manual

BG-UM-88ANS
Crestron Driver User Manual

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 2

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Table of Contents
Statement 4
Safety Precaution 4
Introduction 5
Installation 5
Inputs 6
Outputs 7
Tech Support 8
Warranty 8
Mission Statement 8
Copyright 8
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 3

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●Unplug this device during lightning storms
●Clean only with a soft dry microfiber cloth.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
●Only use accessories specified by the manufacture
●Product specifications may be subject to technical upgrades without further notice
●Do not hot plug when it is working.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 4

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Introduction
This driver has been designed to provide control for the BZBGEAR BG-UM-88ANS 8x8
HDMI Matrix Switcher via RS232 and TCP/IP.
Installation
●You will need to copy all of the files in the folder to your project directory to allow
Simpl Windows to recognize the driver module.
●When using RS-232 for the connection use the following settings:
○Baud Rate: 9600
○Data Bits: 8
○Stop Bits: 1
○Parity: None
●When using TCP/IP for the connection use the following settings:
○IP: The IP you set for the product. (Default: 192.168.1.100)
○Port: The port you set for the product. (Default: 8000)
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 5

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Inputs
The module has the following commands available as inputs:
Command
Type
Description
GetSystemStatus
D
Signal used to get the connected device’s current status.
Reboot
D
Signal used to reset the connected device.
PowerOn
D
Signal used to turn on the connected device.
PowerOff
D
Signal used to turn off the connected device.
BeepOn
D
Signal used to turn on the connected device’s buzzer.
BeepOff
D
Signal used to turn off the connected device buzzer.
PanelLockOn
D
Signal used to turn on the connected device’s panel lock.
PanelLockOff
D
Signal used to turn off the connected device’s panel lock
Input_Port
A
Signal used to set the command parameter, the signal range from
1 to 8
1- Input port1
2- Input port2
3- Input port3
4- Input port4
5- Input port5
6- Input port6
7- Input port7
8- Input port8
Output_Port
A
Signal used to set the command parameter, the signal range from
1 to 8
1- Output port1
2- Output port2
3- Output port3
4- Output port4
5- Output port5
6- Output port6
7- Output port7
8- Output port8
AV_SwitchOver
D
Signal used to switch over the connected device which
according to the Input port and Output Port.
AV_SwitchOver_all
D
Signal used to switch over the connected device the
selected Input port to all Output Port.
AV_PTP_SwitchOver
D
Signal used to switch over the connected device the Input port to
Output Port. Input 1 = > output 1
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 6

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Outputs
The module has the following commands available to be used as feedback outputs:
Command
Type
Description
Rebooting_busy
D
The signal indicates that the connected
device is currently rebooting.
FB_PowerOn
D
The signal indicates that the connected device
is Powered On.
FB_PowerOff
D
The signal indicates that the connected device
is Powered Off.
FB_BeepOn
D
The signal indicates that the connected device
has its buzzer enabled.
FB_BeepOff
D
The signal indicates that the connected device
has its buzzer disabled.
FB_PanelLockOn
D
The signal indicates that the connected device
has its Panel Lock enabled.
FB_PanelLockOff
D
The signal indicates that the connected device
has its Panel Lock disabled.
FB_Input_Port
A
The signal indicates the currently controlled
input port of the device.
The valid range of X is 1-8.
FB_Output_Port
A
The signal indicates the currently controlled
output port of the device.
The valid range of X is 1-8.
FB_HDMI_Output[X]_Signal_Status
A
The signal indicates the connected devices
output port signal source.
The valid range of X is 1-8.
1-Signal source is input port 1
2-Signal source is input port 2
etc…
FB_HDMI_Input[X]_Connection_On
D
The signal indicates the connected devices
input connection is on.
The valid range of X is 1-8.
FB_HDMI_Output[X]_Connection_On
D
The signal indicates the connected devices
output connection is on.
The valid range of X is 1-8.
To_Matrix
S
The signal is used to send character commands
to the connected device.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 7

BZBGEAR BG-UM-88ANS Crestron Driver User Manual
Tech Support
Have technical questions? We may have answered them already!
Please visit BZBGEAR’s support page (bzbgear.com/support) for helpful information and
tips regarding our products. Here you will find our Knowledge Base
(bzbgear.com/knowledge-base) with detailed tutorials, quick start guides, and step-by-step
troubleshooting instructions. Or explore our YouTube channel, BZB TV
(youtube.com/c/BZBTVchannel), for help setting up, configuring, and other helpful how-to
videos about our gear.
Need more in-depth support? Connect with one of our technical specialists directly:
Phone
1.888.499.9906
Email
[e-mail]
Live Chat
bzbgear.com
Warranty
BZBGEAR Pro AV products and cameras come with a three-year warranty. An extended
two-year warranty is available for our cameras upon registration for a total of five years.
For complete warranty information, please visit bzbgear.com/warranty.
For questions, please call 1.888.499.9906 or email [e-mail].
Mission Statement
BZBGEAR is a breakthrough manufacturer of high-quality, innovative audiovisual equipment
ranging from AVoIP, professional broadcasting, conferencing, home theater, to live
streaming solutions. We pride ourselves on unparalleled customer support and services.
Our team offers system design consultation, and highly reviewed technical support for all
the products in our catalog. BZBGEAR delivers quality products designed with users in
mind.
Copyright
All the contents in this manual and its copyright are owned by BZBGEAR. No one is allowed
to imitate, copy, or translate this manual without BZBGEAR’s permission. This manual
contains no guarantee, standpoint expression or other implies in any form. Product
specification and information in this manual is for reference only and subject to change
without notice.
All rights reserved. No reproducing is allowed without acknowledgement.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 8