C-MORE EA1-S6ML User manual

®
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860
inimum items required to create a working system:
•C-more 6” Micro-Graphic panel
•C-more Micro-Graphic ProgrammingSoftware EA-MG-PGMSW (Downloadable versionavailable from the
AutomationDirect web site atno charge.)
•C-more Micro-Graphic USB to RS232 Programming Cable Assembly EA-MG-PGM-CBL used to connect
between a PC and theMicro-Graphic panel’s built-in serial port.The panel will operate inLow-Power mode
when powered by the PC and the screen brightness is diminished.
• Power source – An external 12-24VDC power source is required for normal High-Power operation.
Recommended power supplies are AutomationDirect partnumbers PSC-24-015 or PSC-24-030.
• Personal computer – torun the C-more Micro-Graphicprogrammingsoftware
• Communications Cable (serial) – to connect the C-more Micro-Graphic panel to your controller
Before you begin...
Become Familiar with Available Communication Ports
Accessing the C-more Micro-Graphic Panel Setup Screens
Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start GuideQuick Start Guide
Programming Software & Programming Cable (sold separately)
Copyright 2015, Automationdirect.com Incorporated/All ights eserved Worldwide
Agency Approvals
UL
CUS
R
EA-MG- GMSW
EA-MG- GM-CBL
Additional Help and Support
Setup Menu
1. Information 1. Memory
2. Setting 1. LCD Contrast
2. Backlight
3. Beep
4. Calibration
5. Clear User Memory
1. Serial Port1 – Loop Back Test
2. Serial Port2 – Loop Back Tes t
3. PLC Enquiry Test
Do you want to exit from System Screen?
No[F1] / Yes[F5]
3. Test Menu
4. Exit
2. Protocol
3. Extensions
4. Versions
6. Reset to Factory Default
7. Hourglass
8. Rotation
4. Buzzer Test
5. Touch Panel Test
General Description
The C-more 6” icro-Graphic panel has a 5.7-inch STN LCD monochrome 320 x 240 dot display. odel
EA1-S6 L has five selectable LED-driven backlight colors including Green, Red, Amber, Yellow and Lime.
odel EA1-S6 LW has five selectable LED-driven backlight colors including White, Pink1, Pink2, Pink3
and Red. Both models feature five user-defined function keys, each key with a user-defined red LED indi-
cator. The panels can display up to 40 lines by 80 characters of static text and up to 40 lines by 40 charac-
ters of dynamic text with embedded variables and phrases mixed with graphics at landscape orientation.
Portrait orientation can display 60 characters and 53 lines of static text and 40 lines by 40 characters of
dynamic text. Each model is rated UL for use on a flat surface ofType 1, 4X enclosure (indoor use only).The
C-more 6” icro-Graphic panels are powered from a 12-24 VDC power supply or can operate in low-power
mode when powered from the serial communications port of select AutomationDirect PLCs.
Other features include:
• 1792 KBmemory
• Built inRJ12 serialcommunications port(RS-232)
• Built in15-pin serial communications port (RS-232/422/485)
• Adjustable contrast
• 2 optional keypad bezels 20-button landscapeand 21-button portrait mount
• Optional replaceable clear screen overlay
• Built inAlarm Control setupthat activates beep backlight flash customized alarm banner and red LED blinking
• Up to 999 screens limited onlyby memory usage
• 0 to 50 °C (32 to 122 °F) operating temperature range
• UL cUL & CE agency approvals (see below fordetails)
• 2-year warranty from date of purchase
rogramming Software USB to RS232 rogramming
Cable Assembly
NOTE: Free download of the
CC--mmoorree Micro-Graphic
programming software at the
AutomationDirect web site.
Safety Information
WARNING: To minimize the risk of potential safety problems, you should follow all applicable
local and national codes that regulate the installation and operation of your equipment. These
codes vary from area to area and it is your responsibility to determine which codes should be
followed, and to verify that the equipment, installation, and operation are in compliance with the
latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes
and standards. We do not guarantee the products described in this publication are suitable for your
particular application, nor do we assume any responsibility for your product design, installation, or
operation.
If you have any questions concerning the installation or operation of this equipment, or if you need
additional information, please call us at 1-800-633-0405 or 770-844-4200.
This publication is based on information available at the time it was printed. At
Automationdirect.com® we constantly strive to improve our products and services, so we reserve
the right to make changes to the products and/or publications at any time without notice and
without obligation. This publication may also discuss features that may not be available in certain
revisions of the product.
Connect C-more 6” Micro-Graphic Panel to PLC
Install the Software and Develop a Project
• For product support specifications and installation troubleshooting a Hardware User Manual can be downloaded from
the On-line Documentation area of the AutomationDirect web site or purchased through the AutomationDirect Sales
team @ 1-800-633-0405 as part number EA1-MG6-USER-M.
• For software programming help refer to the C-more Micro-Graphic Programming Software on-line embedded help.
• Refer to demos of the product at: www.CmoreMicro.com/software/software_demo.html
• For additional technical support and questions call our Technical Support team @ 1-800-633-0405 or 770-844-4200.
Install C-more 6” Micro-Graphic Panel
NOTE: ecommended DC power supply to power the C-more Micro-Graphic Panel, AutomationDirect
Part No. PSC-24-015 or PSC-24-030.
To access the Setup Menu of the panel’s setup
screens, press the the BAK [F1] and ENT [F5]
function keys simultaneously for three (3) seconds.
From the Setup enu, information about the panel
can be obtained, settings can be adjusted, and panel
functions can be tested.
Menu flow Chart
Connect C-more Micro-Graphic Panel to Computer
Use an EA- G-PG -CBL, USB to RS-232 Programming Cable Assembly, from a USB port type A on the
project development PC, through the supplied converter, to the RJ12 RS-232 programming/PLC serial
communications port on the C-more icro-Graphic panel as shown below.
C-more 6 inch
Micro Graphic
Panel
USB
Cable
User PC
Serial
Cable
PC to Panel Programming
Cable Assembly
(Includes serial & USB cables)
EA-MG-PGM-CBL
USB to RS232
Converter
USB to RS-232
rogramming Cable Assembly
C-more 6” Micro-Graphic Panels, Accessories & Replacement Parts
*NOTE: CC--mmoorreeMicro-Graphic panels with the letter “W” in the part number designate units with
5 selectable background colors of White, Pink1, Pink2, Pink3 and ed. Part numbers without the
letter “W” are provided with 5 selectable background colors of Green, ed, Amber, Yellow and Lime.
NOTE: Software and Firmware Version 2.0 or later is required with models EA1-S6ML and
EA1-S6MLW. Available for free download at www.automationdirect.com.
EA1-S6MLW
shown in ortrait (Vertical) mode
EA1-S6ML
shown in Landscape (Horizontal) mode
Cutout
Template
Function Key
Label Inserts
Mounting
Clips
C-more 6 Inch
Micro-Graphic
Panel
DC Power
Connector
1Unpac and Inspect
• Unpack the C-more Micro-Graphic panel from its shipping
carton. Included in the carton are the following:
• C-more 6” Micro-Graphic panel
• cutout template
• mounting clips
• gasket
• function key label inserts
• Quick Start Guide
• DC Power Connector
• Unpack any accessories that have been ordered such as:
Keypad Bezel DC Power Supply programming cable
communications cable etc.
• Inspect all equipment for completeness. If anything is missing
or damaged immediately call the AutomationDirect returns
department @ 1-800-633-0405.
2Install Optional Hardware Accessories (sold separately)
C-more 6 Inch
Micro-Graphic Panel
20 Button
Keypad Bezel
EA-MG6-BZ2
1. Remove
Expansion
Connector
Protective
Cover from
rear of
panel.
2.Use the (4) Panel Mounting
Clips that are supplied with
the panel,to secure panel to
keypad bezel and compress
the gasket between the
panel and the keypad bezel.
Tighten screws to a torque
of 21-28oz-in [0.15-0.2 Nm].
3.Use (8) Bezel MountingClips to
secure keypad bezel through
enclosure cutout. Tighten screws
to a torque of 21-28oz-in
[0.15-0.2 Nm].
Function
Key Label
Insert
4.Peel Protective Film
from front of panel.
Shown is an example of a
C-more 6” icro-Graphic
panel being assembled with
an optional 20-button
Keypad Bezel.
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
3
R
R
LISTEDLISTED
7M177M17
Datecode:****Datecode:****
55443322 11 R01.R01.
MADEIN CHINAMADEIN CHINA
EA1-S6MLW+ serial numberEA1-S6MLW+ serial number
MODEL:EA1-S6MLWMODEL:EA1-S6MLW
INPUT:12-24V 6.5WINPUT:12-24V 6.5W
IND.CONT.EQ.IND.CONT.EQ.
6 5 4 3 2 1
Pin Signal
1 Logic GND
not used
RXD (232C)
TXD (232C)
2
3
4
5 Receives 5VDC
6 Logic GND
81
15 9
Pin Signal
1 Frame GND
TXD (232C)
RXD (232C)
Supplies +5VDC
2
3
4
5 Logic GND
Pin Signal Pin Signal
6 LE
CTS (232C)
RTS (232C)
RXD+ (422/485)
7
8
9
10 RXD– (422/485)
11 TXD+ (422/485)
TXD– (422/485)
Term.Resistor
do not use
12
13
14
15 do not use
RS-232
RS-232/422/485
Expansion
Connector
RJ12 serial
communications Port1
PLC 15-pin serial
communications Port2
The C-more 6” icro-Graphic panels include a built-in RJ12 serial communications port (RS-232) used to
communicate with a PC during project development and later as a PLC communications interface. There is
also a second 15-pin RS-232/RS-422/RS-485 port for communications to a PLC.
anel Cutout (all models)
Landscape cutout shown
The C-more 6” icro-Graphic panel can be
mounted through a cutout in an enclosure by using
the template provided with the panel, or using the
dimensions shown. The optional keypad bezels also
include templates. The enclosure mounting thickness
range for the panels and the keypad bezels is
0.04”–0.2” [1–5 mm]. ounting screw torque is 21-
28 oz-in [0.15-0.2 Nm].
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
Enclosure Thickness
0.260
[6.6]
0.256
[6.5]
0.256
[6.5]
0.260
[6.6]
R .118 [R3]
CUTOUT
CUTOUT
OUTLINE
BEZEL
OUTLINE
122.2 +1
–0
+0.04
–0.00
4.811
161.0 +1
–0
+0.04
–0.00
6.339
4
5
6
7Provide Power to the C-more 6” Micro-Graphic Panel
1). The panel should be powered by a 1 Amp @ 12-24 VDC
class 2 power source in normal operation.
2). The C-more 6” Micro-Graphic panel is powered during
programming from the PC through the USB to RS-232
Programming Cable Assembly EA-MG-PGM-CBL. When
powered from the PC the panel will operate in Low-Power
mode.
3). Optionally the C-more 6” Micro-Graphic panel can be
powered in Low-Power mode* from most AutomationDirect
PLC’s RJ12 serial communications port by using a
DV-1000CBL communications cable or a DV-1000CBL
communications cable with a FA-15HD 15-pin HD
DSub/RJ12 Adapter connected to an AutomationDirect
PLC’s 15-pin HD communications port (DL06 D2-250-1 &
D2-260) PLCs. See Chapter 6: PLC Communications in the
Hardware User Manual (EA6-USER-M) for additional
details.
R
R
LISTEDLISTED
7M177M17
Datecode:****Datecode:****
5
5443322
1
1
R01.R01.
MADEIN CHINAMADEIN CHINA
EA1-S6MLW+ serial numberEA1-S6MLW+serialnumber
MODEL:EA1-S6MLWMODEL:EA1-S6MLW
INPUT:12-24V 6.5WINPUT:12-24V 6.5W
IND.CONT.EQ.IND.CONT.EQ.
81
159
Supply to Panel:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
+
–
GND Equipment
GroundRecommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
*NOTE: When the panel is powered through Port1 from a connected PLC or PC, the screen brightness
is diminished because the panel is running in Low-Power Mode. For full brightness, connect an
external 12-24 VDC power source to the panel’s power connection. Low-Power Mode should be
used during initial programming only. Connect an external 12-24 VDC power source when the
panel is installed in its application.
NOTE: Install C-more Micro-Graphic
Programming software before connecting
the panel to the PC to ensure the panel
drivers install correctly.
Following are the minimum system requirements for running C-more icro-Graphic Programming
Software, EA- G-PG SW, on a PC:
• Operating System - Windows® XP Home / Professional Edition Service Pack 2 Windows® 2000 with Service Pack 4
Windows® Vista (32 or 64 bit) Windows® 7 (32 or 64 bit) or Windows 8 (32 or 64 bit)
• Keyboard and Mouse or compatible pointing device
• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution
(1024 x 768 pixels recommended) 64K color minimum
• 150 MB free hard-disk space
• CD-ROM or DVD drive for installing software from the CD or internet access to download free programming software
• USB port to use with an EA-MG-PGM-CBL USB to RS232 Programming Cable Assembly for project transfer from the
programming software to the panel
NOTE: Software and Firmware Version 2.0 or later is required with models EA1-S6ML and
EA1-S6MLW. Available for free download at www.automationdirect.com.
8
BAK
1. Information >
2. Setting >
3. Test Menu >
4. Exit >
UP
DWN
ENT
ENT
SETUP MENU
BAK
Total:
1835008 Bytes
Usage:
26206Bytes
Free:
1808802 Bytes
MEMORY
Examples
Choose C-more 6” Micro-Graphic Panel to PLC Protocols
& Cables
9
NOTE: For the latest list of available
PLC drivers and PLC cables go to
www.automationdirect.com.
Cable Description Cable Part No.
Cables used with serial Port2
AutomationDirect Productivity Series Do-more,
CLICK, DDiirreeccttLOGIC PLC RJ-12 port, DL05, DL06,
DL105, DL205, D3-350, D4-450 & H2-WinPLC
(RS-232C)
EA-2CBL
D
Di ir re ec ct tLOGIC (VGA Style) 15-pin port,
DL06, D2-250 (250-1), D2-260
(RS-232C). EA-2CBL-1
DDiirreeccttLOGIC PLC RJ-11 port, D3-340
(RS-232C). EA-3CBL
DDiirreeccttLOGIC DL405 PLC 15-pin D-sub
port, DL405 (RS-232C). EA-4CBL-1
DDiirreeccttLOGIC PLC 25-pin D-sub port,
DL405, D3-350, DL305 DCU and all DCM’s
(RS-232C). EA-4CBL-2
Allen-Bradley MicroLogix 1000, 1100,
1200 & 1500 (RS-232C) EA-MLOGIX-CBL
Allen-Bradley SLC 5-03/04/05,
ControlLogix, CompactLogix, lexLogix
D 1 port (RS-232C) EA-SLC-232-CBL
Allen-Bradley PLC-5 D 1 port
(RS-232C) EA-PLC5-232-CBL
Allen-Bradley MicroLogix, SLC 5-01/02/03,
DH485 port (RS-232C) EA-DH485-CBL
GE 90/30, 90/70, Micro 90, Versamax Micro
(Port2) 15-pin D-sub port
(RS-422A) EA-90-30-CBL
MITSUBISHI X Series 25-pin port
(RS-422A) EA-MITSU-CBL
MITSUBISHI X Series 8-pin mini-DIN
(RS-422A) EA-MITSU-CBL-1
OMRON Host Link (C200 Adapter, C500)
(RS-232C) EA-OM ON-CBL
Cable Description Cable Part No.
Cables used with serial Port1
AutomationDirect Productivity Series, Do-more,
CLICK, DDiirreecctt LOGIC PLC RJ-12 port, DL05, DL06,
DL105, DL205, D3-350, D4-450 & H2-WinPLC
(RS-232C)
DV-1000CBL
Note: The PLC can provide 5 VDC through this cable. No external 12-24
VDC souce is required, however, screen brightness is diminished and
the alarm beep will not function.
D
Di ir re ec ct t LOGIC DL405 PLC 15-pin D-sub
port, DL405
(RS-232C) D4-1000CBL
DDiirreeccttLOGIC (VGA Style) 15-pin port,
DL06, D2-250 (250-1), D2-260
(RS-232C)
Use with DV-1000CBL cable.
FA-15HD
DDiirreecctt LOGIC PLC 15-pin D-sub port,
DL405
(RS-232C). FA-CABKIT
DDiirreeccttLOGIC PLC RJ-11 port, D3-340
(RS-232C). OP-3CBL-1
10
Connect the serial communications cable between the C-more icro-Graphic panel and the PLC. The
panel can be connected to the PLC via the panel’s built-in RJ12 serial communications port (RS-232) or
15-pin serial communications port with either RS-232, RS-422 or RS-485 communications.
Port 1
Port 1 DV-1000CBL
serial cable
CLICK PLC
C-more 6 Inch
Micro-Graphic
Panel
*NOTE: When the panel is powered through Port1 from a connected PLC or PC, the screen brightness
is diminished because the panel is running in Low-Power Mode. For full brightness, connect an
external 12-24 VDC power source to the panel’s power connection. Low-Power Mode should be
used during initial programming only. Connect an external 12-24 VDC power source when the
panel is installed in its application.
Tightening Torque
Power supply wire connection 1.7 lb-in (0.2 Nm)
equired Wire Specif ication
Supported temperature Over 60 °C
Wire Material Copper
Wire Size 16 - 22 AWG
PLC Drivers
Serial - port1 or port2 Serial - port2 only
AutomationDirect Productivity3000 Allen-Bradley D 1 ull Duplex
AutomationDirect CLICK Allen-Bradley D 1 Half Duplex
AuomationDirect Do-more Allen-Bradley PLC5 D 1
AutomationDirect K-sequence Allen-Bradley DH485
AutomationDirect DirectNET GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
AutomationDirect SOLO Mitsubishi X
AutomationDirect GS Drives Mitsubishi Q and QnA
AutomationDirect Modbus Omron Host Link (C200 Adapter, C500)
Modicon Modbus RTU Omron INS Serial (CJ1, CS1)
Entivity Modbus RTU Siemens PPI (S7-200 CPU)
AutomationDirect SOLO Temperature Controller
AutomationDirect GS Drives
roduct ackage Label
NOTE: CC--mmoorree6” Micro-Graphic panels with hardware version 05 and higher must use firmware
version 3.20 or higher
roduct Label
R
R
LISTEDLISTED
7M177M17
Date code:****Date code:****
5
5443322
1
1
R05.R05.
MADE IN CHINAMADE IN CHINA
EA1-S6MLW + serial numberEA1-S6MLW + serial number
MODEL:EA1-S6MLMODEL:EA1-S6ML
INPUT:12-24V 6.5WINPUT:12-24V 6.5W
IND.CONT.EQ.IND.CONT.EQ.
Hardware Version
UL/CUL/CSA/CE Certification Numbers
Name UL/CUL UL508 CSA CE ISO-9000
CC--mmoorreeMicro-Graphic Panels
& Accessories E157382 E157382 234884 EN61131-2 Yes

TxD RxD PWR
LED Status Indicators
Replacement Parts
USB to RS232 Programming Cable Assembly
TOP VIEW
FRONT VIEW
LEFT VIEW
0.484
[12.3]
2.598
[66.0]
2.539
[64.5]
1.417
[36.0]
0.886
[22.5]
0.923
[23.4]
Units: inches [mm]
Clear Screen Overlay
Converter
Dimensions
USB to S232 Converter Specifications
Part Number: EEAA--MMGG--PPGGMM--CCBBLL
Description:
6-ft. cable assembly to connect personal computer to any CC--mmoorreeMicro-Graphic panel for setup and
programming. (Note: This cable assembly uses the PC's USB port and converts the signals to serial
transmissions. The USB port supplies 5 VDC to the Micro-Graphic panel for configuration operations.) Assembly
includes standard USB A-type connector to B-type connector cable, custom converter, and an RS232C cable
(DV-1000CBL) with RJ12 modular connector on each end.
Hardware:
• USB Interface USB Specification Rev. 1.1
Connector: USB Type B jack to accept USB Type B cable plug
• Serial Interface RS232 (EIA-232-E)
Connector: RJ12 phone jack 6p to accept RJ12 cable plug
• Baud ate 115.2 kbps Maximum
• Input Voltage 5 VDC (Supplied thru serial interface cable.)
• Power Consumption 50 mA (Does not include power to panel and/or bezel.)
Accessory Cables:
• USB Cable USB Type A plug to PC on one end, USB Type B plug to converter on other end, 0.30 m [1 foot] length (* Note)
• Serial Cable DV-1000CBL cable with RJ12 phone plug connectors on both ends, 2.0 m [6.56 feet] length (* Note)
Physical:
• Dimensions 2.559” (W) x 1.417” (H) x 0.886” (D)
[65.0 mm x 36.0 mm x 22.5 mm]
• Weight 1.06 oz. [30 g]
Environmental: Same as C-more Micro-Graphic panel specifications.
* Note: Maximum cable length for either the USB or serial cable should not exceed 2.0 m [6.56 feet] in length.
C-more Micro-Graphic Panel Dimensions
Converter Status Indicators
EA-MG6-BZ2
Cutout Dimensions
20 Button Landscape (Horizontal) Keypad Bezel
anel Thickness
EA-MG6-BZ2 Keypad
Bezel Dimensions
6.295
[159.9]
6.850
[174.0]
.236
[6.0]
1.453
[36.9]
1.689
[42.9]
2.13
[54.1] GASKET
MOUNTING CLIP
(4) places
Units: Inches [mm]
4.770
[121.3]
5.331
[135.4]
EA1-S6ML & EA1-S6MLW
anel Dimensions
NOTE: Panel shown in
Landscape (Horizontal)
orientation
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
R
R
LISTEDLISTED
7M177M17
Datecode:****Date code:****
5
5443322
1
1
R01.R01.
MADEINCHINAMADEIN CHINA
EA1-S6MLW?{0752015001EA1-S6MLW?{0752015001
MODEL:EA1-S6MLWMODEL:EA1-S6MLW
INPUT:12-24V 6.5WINPUT:12-24V 6.5W
IND.CONT.EQ.IND.CONT.EQ.
MOUNTING CLIP
SCREW TORQUE RANGE
21 - 28 oz-in [0.15-0.2 Nm]
Enclosure Mounting Thickness
Mounting Clip Screw Torque
Part Number Description
EA-MG-BZ2-B K Replacement mounting clip for CC--mmoorreeMicro-Graphic panel and keypad bezels (pk of 8)
EA-MG-DC-CON Replacement DC power connector (pk of 5)
EA-MG6-S6ML-GSK Replacement mounting gasket for CC--mmoorree6” Micro-Graphic panels
EA-MG6-BZ2-GSK Replacement mounting gasket for CC--mmoorree6” Micro-Graphic keypad bezels EA-MG6-BZ2 and EA-MG6-BZ2P
EA-MG-S6ML-FKL Replacement function key label insert for CC--mmoorreeMicro-Graphic panels
(pk of 5; 3 blank, 1 1- 5 for landscape, 1 1- 5 for portrait)
anel Mounting Clips
art No. EA-MG-BZ2-BRK
DC ower Connector
art No. EA-MG-DC-CON
anel Gasket
art No. EA-MG6-S6ML-GSK
(pk of 5)
(pk of 8)
Function Keys Label Inserts
art No. EA-MG6-S6ML-FKL
(pk of 5; 3 blank, 1 F1-F5 for
landscape, 1 F1-F5 for portrait)
Keypad Bezel Gasket
art No. EA-MG6-BZ2-GSK
778
899
4
45
566
1
1
2
233
+/-+/-
0
0
MenuMenu
CLRCLR
EnterEnter
EscEsc
5.588
[141.9]
6.394
[162.4]
0.394
[10.0]
2.094
[53.2]
1.882
[47.8]
9.195
[233.5]
10.000
[254.0]
GASKET
MOUNTING CLIP (Qty:8)
SCREW TORQUE RANGE
21 - 28 oz-in [0.15 - 0.2 Nm]
Units: Inches [mm]
MOUNTING CLIP
(8) places
EnterEnter
778
89
9
4
45
566
1
1
2
233
+/-+/-
0
0
MenuMenu
CLRCLR
EscEsc
Units: Inches [mm]
0.382
[9.7]
0.382
[9.7]
0.382
[9.7]
0.382
[9.7]
143.0 +1
–0
+0.04
–0.00
5.630
CUTOUT
234.6 +1
–0
+0.04
–0.00
9.236
R0.59 [R1.5]
CUTOUT
OUTLINE
BEZEL
OUTLINE
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
EA-MG6-BZ2
Keypad Bezel
Four directional
cursor buttons,
numeric buttons and
ESC, MENU, CLEA
and ENTE buttons.
20-Button Keypad Bezel Specifications
Part Number: EEAA--MMGG66--BBZZ22
General:
• Micro-Graphic
Panels Supported EA-S6ML, EA-S6MLW
• Connection Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
• Power Consumption None
• Keypad Button Life Minimum of 500,000 cycles
• Enclosure Mounting
(8) mounting clips, EA-MG-BZ2-BRK, included.
Note: The C
C- -m mo or re e6” Micro-Graphic panel is installed into the keypad bezel using the
(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
Environmental:
• Operating Temperature 0 to 50 °C (32 to 122 ° )
Maximum surrounding air temperature rating 50 °C
• Storage Temperature -20 to 60 °C (-4 to 140 ° )
• Humidity 5 to 95 % RH (non-condensing)
• Environmental air or use in Pollution Degree 2 environment
• Vibration IEC60068-2-6 (Test c), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity NEMA ICS3-304
R I, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Enclosure or use on a flat surface of Type 1, 4X enclosure (for indoor use only)
• Agency Approvals CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL ile E157382
Physical:
• Dimensions 10.000” (W) x 6.394” (H) x 2.488” (D)
[254.0 mm x 162.4 mm x 63.2 mm]
• Weight 26.1 oz. [740 g]
EA-MG6-BZ2
Cutout Dimensions
21 Button Landscape (Horizontal) Keypad Bezel
anel Thickness
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
EA-MG6-BZ2
Keypad Bezel
EnterEnter
5.588
[141.9]
6.394
[162.4]
0.394
[10.0]
2.094
[53.2]
1.882
[47.8]
9.195
[233.5]
10.000
[254.0]
GASKET
MOUNTING CLIP (Qty: 8)
SCREW TORQUE RANGE
21 - 28 oz-in [0.15 - 0.2 Nm]
Units: Inches [mm]
MOUNTING CLIP
(8) places
CLRCLR
MenuMenu
EscEsc
9
98877
6
65544
3
322
1
1
+/-+/-
0
0
EnterEnter
BEZEL
OUTLINE
0.382
[9.7]
0.382
[9.7]
0.382
[9.7]
0.382
[9.7]
143.0 +1
–0
+0.04
–0.00
5.630
CUTOUT
234.6 +1
–0
+0.04
–0.00
9.236
R0.59 [R1.5]
CUTOUT
OUTLINE
EnterEnter
CLRCLR
MenuMenu
EscEsc
9
98877
665544
3322
11
+/-+/-
0
0
EnterEnter
Four directional cur-
sor buttons, numeric
buttons, and ESC,
MENU, CLEAR and
two ENTER buttons.
EA-MG6-BZ2 Keypad
Bezel Dimensions
21-Button Keypad Bezel Specifications
Part Number: E
EA A- -M MG G6 6- -B BZ Z2 2P P
General:
• Micro-Graphic
Panels Supported EA-S6ML, EA-S6MLW
• Connection Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
• Power Consumption None
• Keypad Button Life Minimum of 500,000 cycles
• Enclosure Mounting
(8) mounting clips, EA-MG-BZ2-BRK, included.
Note: The CC--mmoorree6” Micro-Graphic panel is installed into the keypad bezel using the
(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
Environmental:
• Operating Temperature 0 to 50 °C (32 to 122 ° )
Maximum surrounding air temperature rating 50 °C
• Storage Temperature -20 to 60 °C (-4 to 140 ° )
• Humidity 5 to 95 % RH (non-condensing)
• Environmental air or use in Pollution Degree 2 environment
• Vibration IEC60068-2-6 (Test c), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity NEMA ICS3-304
R I, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Enclosure or use on a flat surface of Type 1, 4X enclosure (for indoor use only)
• Agency Approvals CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL ile E157382
Physical:
• Dimensions 6.394” (W) x 10.000” (H) x 2.488” (D)
[162.4 mm x 254.0 mm x 63.2 mm]
• Weight 26.1 oz. [740 g]
EA-6-COV2
4.913
[124.8]
3.795
[96.4]
0.197
[5.0]
0.157
[4.0]
EA-6-COV2
Dimensions
Remove the overlay from the package
Remove the paper backing from the overlay
Align the overlay with the screen and
press the adhesive firmly into place Remove the protective film*
*NOTE: The protective
cover ships with a thin
protective sheet on the
face of the cover that
needs to be carefully
removed. If your panel
is not clear, the protec-
tive sheet may not have
been removed.
Step 1
Step 3
Step 2
Step 4
Communication Port Adapters
The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of
the 6” panel to allow a PLC communication cable to be plugged in at a 90
degree angle to reduce panel depth requirements. 15-pin straight through
pin-out. UL Recognized.
EA-AD TR-4
Countryof Origin
Datecode
IOIOI – PLC
1.605
[40.8]
1.873
[47.6]
0.793
[20.2]
EA-ADPTR-4
KOYOELECTRONICSINDUSTRIES CO.,LTD.
Units: inches[mm]
Countryof Origin
EA-COMCON-3
GND
SD–
SD+
RD–
RD+
TERM
Datecode
1.756
[44.6]
1.873
[47.6]
1.126
[28.6]
KOYOELECTRONICSINDUSTRIES CO., LTD.
Units: inches [mm]
1.695
[43.1]
0.412
[10.5]
0.751
[19.1]
0.333
[8.5]
Units: inches [mm]
1.695
[43.1]
0.564
[14.3]
0.903
[22.9]
0.687
[17.5]
Units: inches [mm]
Dimensions
R
R
Terminals
GND SD–
SD+
RD– RD+ TERM
D-SUB 15-pin 90-degree Communication ort Adapter (EA-AD TR-4)
The EA-CO CON-3 adapter plugs into the 15-pin serial port on the rear of
the 6”panel to allow wire terminal connections for an RS-422/RS-485/DH-485
PLC communication cable. UL Recognized.
D-SUB 15-pin to Terminal Block Adapter (EA-COMCON-3)
EA-COMCON-3 Dimensions
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
C-more 6” Micro-Graphic Panel Specifications
Specifications
Description: 320 x 240 dots LCD display (Landscape Mode),
five user defined keypad function buttons, and five user defined LED's
Display:
• Type 5.7" STN monochrome LCD, graphical characters
• esolution 320 (W) x 240 (H) dots (Landscape Mode)
240 (W) x 320 (H) dots (Portrait Mode)
• Color 2 colors (normal / inverse)
• Display Brightness
( eference)
Low Power Mode* High Power Mode
Red –> 10 nits
Green –> 11 nits
White –> 13 nits
Red –> 50 nits
Green –> 125 nits
White –> 150 nits
• Viewing Area Size 4.614” (W) x 3.480” (H) [117.2 mm x 88.4 mm]
• Active Area Size 4.535” (W) x 3.400” (H) [115.2 mm x 86.4 mm]
• Contrast Adjusted from the panel’s built-in configuration setup menu
• Viewing Angle 3, 9 o’clock axis –> 45 degrees
6 o’clock axis –> 40 degrees
12 o’clock axis –> 20 degrees
Backlight:
• Type LED
• Color
Model EA1-S6ML : 5 user defined colors:
Red, Green, Amber, Lime, and Yellow
Model EA1-S6MLW : 5 user defined colors:
White, Pink1, Pink2, Pink3, and Red
• User eplaceable No
Touch Screen:
•Type Analog touch panel
• Operation 82 gram force [0.8 N] maximum
• Life Minimum of 1,000,000 cycles
Features:
• User Memory 1792 kBytes
• Number of Screens Up to 999 – limited by project memory usage
• Beep (Internal) Yes
• Keypad Function Buttons ive user defined function key buttons with the ability to custom label with an overlay.
Minimum of 500,000 cycles
• Keypad Function Button LEDs Each function key button includes a red LED that can be user programmed.
• Serial Communications Built-in RJ12 serial communications port (RS-232)
and 15-pin D-sub serial communications port (RS-232, RS-485 / 422).
• Expansion Connection Yes – used with optional Keypad Bezels, EA-MG6-BZ2 & EA-MG6-BZ2P
Screen Objects:
• Functional Devices
Push Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric
Entry, Inc/Dec Value, Bar Graph, Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text,
Lookup Text, Dynamic Text, Screen Change Push Button, Screen Selector, Adjust Contrast, unction, Key
Configuration Object, Real Time Graphics Line Graph, Analog Meter.
• Static Shapes Lines, Rectangles, Circles and rames
• Displayable Fonts ixed fonts: 6x6, 6x8, 8x16, 16x16, 32x16, 32x32, and Windows fonts
Electrical:
Low Power Mode* High Power Mode
• Input Voltage ange 5.0 VDC (4.75 – 5.25 VDC) 12/24 VDC (10.2 – 26.4 VDC)
• Input Power
Supplied through the panel’s RJ12 serial communi-
cations port connection when used with most
AutomationDirect PLCs having a RJ12 communica-
tion port or from a PC USB.
Supplied from an external class 2, 12-24 VDC
power source
• Power Consumption 1.05 W @ 5 VDC (210 mA) 6.5 W @ 10.2 VDC (630 mA)
• ecommended Fuse No fuse required when directly connected to a PLC
or PC with recommended cable. Type AGC fast acting glass fuse, 750 mA, 250 VAC, ADC p/n AGC-75
• Maximum Inrush Current 1 A for 500 µs 10 A for 500 µs
• Acceptable External
Power Drop Duration Maximum 1 ms
Environmental:
• Operating Temperature 0 to 50 °C (32 to 122 ° )
Maximum surrounding air temperature rating 50 °C
• Storage Temperature –20 to +60 °C (–4 to +140 ° )
• Humidity 5–95% RH (non-condensing)
• Environmental Air or use in Pollution Degree 2 environment
• Vibration IEC60068-2-6 (Test c), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity NEMA ICS3-304
RI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Enclosure or use on a flat surface of Type 1, 4X enclosure (for iinnddoooorruse only)
• Agency Approvals CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL ile E157382, CSA ile 234884
Physical:
• Dimensions 6.850” (W) x 5.331” (H) x 2.130” (D) [174.0 mm x 135.4 mm x 54.1 mm] (Landscape Mode)
5.331” (W) x 6.850” (H) x 2.130” (D) [135.4 mm x 174.0 mm x 54.1 mm] (Portrait Mode)
• Enclosure Mounting
Thickness ange 0.04” – 0.2” [1 – 5 mm]
• Mounting Clip Screw
Torque ange 21 – 28 oz-in [0.15 – 0.2 Nm]
• Depth from bezel rear
with options Module 1.894” [47.1 mm]
• Weight 30.69 oz. (870 g)
*NOTE: When the 6” panel is powered through Port1 from a connected PLC or PC, the screen bright-
ness is diminished because the panel is running in Low-Power Mode. For full brightness, connect
an external 12-24 VDC power source to the 6” panel’s power connection. Low-Power Mode should
be used during initial programming only. Connect an external 12-24 VDC power source when the
panel is installed in its application.
Customizing the Function Keys Label Insert
Step 1 - emove existing
function key label insert
using a small tool such as
jeweler’s screw driver.
Step 2 - emove the
protective film from the
blank key label insert. Step 3 - If desired, print and
apply self adhesive labels to
the blank insert.
Step 4 - Install the new insert
into the slot in the side of the
panel and lock tab into place.
4.803
[122.0]
0.563
[14.3]
Units: inches [mm]
0.282
[7.15]
0.709
[18.0]
Typical
Data Sheet: EA1-MG6-QSG, Rev. L