cable matters 103080 User manual

1x2 Audio/Video Splitter
Model 103080
Email: [e-mail]
User Manual
 Supports 4K@60Hz displays with HDMI

Table of Contents
1. INTRODUCTION.....................................................................1
1.1 Introduction
1.2 Copyright and Trademarks
1.3 FCC Compliance Statement
2. PRODUCT OVERVIEW
2.1 Package Contents ..........................................................................2
2.2 Product Description
2.3 Product Features
3. CONNECTION INSTRUCTIONS............................................3
3.1 Installation Checklist
3.2 Front Panel Diagram
3.3 EDID Settings .................................................................................4
3.4 Rear Panel Connections
3.5 Connection Instructions ..................................................................5
3.6 Troubleshooting Tips
4. TECHNICAL SPECIFICATIONS ............................................6
5. WARRANTY AND SUPPORT
5.1 Customer Support and Contact Information
5.2 Warranty Information
5.3 Limitations of Liability
1x2 Audio/Video Splitter
www.cablematters.com

1
www.cablematters.com
1x2 Audio/Video Splitter
1. Introduction
1.1 Introduction
Thank you for your purchase from Cable Matters® Inc., the ‘Reliable Connectivity’
company. This User Manual provides an overview of the features and installation of
your new
1x2 Audio/Video Splitter
Please read these instructions carefully before connecting, operating or configuring
this product. Please keep this user manual for future reference.
Contact [e-mail] for questions or product support.
1.2 Copyright and Trademarks
Specifications are subject to change without notice. Cable Matters is a registered
trademark or trademark of Cable Matters Inc. All rights reserved. All other trade-
marks are the property of their respective owners.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and/or other countries.
1.3 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) This device must not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.

2
www.cablematters.com
1x2 Audio/Video Splitter
2. Product Overview
2.1 Package Contents
Please check that the following items are contained in the package:
 1 x 1x2 Audio/Video Splitter
 2 x High Speed HDMI Cables (6 Foot)
 2 x Mounting Brackets and Screws
 1 x AC Power Adapter
 1 x User Manual (available in a PDF from cablematters.com)
Note: Two HDMI cables are included. Additional cables are sold separately.
2.2 Product Description
The Cable Matters® 1x2 Audio/Video Splitter provides simultaneous
viewing for 2 monitors, projectors, or TVs. View identical images from a
set-top box, Blu-ray player, gaming console or computer with HDMI.
2.3 Product Features
 Connect a Blu-ray player, STB, or computer to 2 displays with HDMI
 Includes two 6-foot High Speed HDMI cables
 Supports up to 4Kx2K @ 60Hz video resolutions for both displays
 7.1 surround sound audio support
 AC powered unit boosts the audio and video signals
 Rugged metal housing construction
 Surface mountable with included brackets and screws
 Compatible with HDCP compliant equipment for viewing protected video

3
www.cablematters.com
1x2 Audio/Video Splitter
3. Connection Instructions
3.1 Installation Checklist
Please review the following steps before installing the A/V Splitter:
 Test the Splitter and cabling before installing in a permanent location
 Power OFF all the equipment before connecting the Splitter and cables
 Locate the Splitter within 5 feet of an AC electrical outlet
 Use high quality HDMI cables for the best performance
 4K video may need an active HDMI cable for distances over 15 feet
 4K video resolution requires a 4K source, 4K cable, and a 4K display
 HDMI source and destination must share a common video resolution and
refresh rate
 Certain CATV or STB makers may block the replication of the HDMI
signal. Check with your service provider
 Output from a computer source can only be mirrored, not extended
3.2 Front Panel Diagram
1) POWER: Green LED indicator verify a connection to power
2) OUT 1: Blue LED indicates a live HDMI signal to 1st display
3) IN: Blue LED indicates active HDMI signal from video source
4) OUT 2: Blue LED indicates active HDMI signal to 2nd display
5) EDID: Manual switch for selecting HD or 4K video output

4
www.cablematters.com
1x2 Audio/Video Splitter
3.4 Rear Panel Connections
3.3 EDID Settings
HD: This is the default setting for the Splitter
 Video output is set to 1080p @ 60Hz
 Audio is set LPCM 2CH stereo
4K: This is the programmable setting for the Splitter
 Video output is set to the EDID of Video OUT 1 display
 4Kx2K video resolution will be displayed if supported by the video
source and both output displays
 Outputs the highest resolution supported by all connected displays
1) DC 5V: Connect the AC power adapter to the Splitter
2) VIDEO IN: Connect the video source (TV or other source)
3) VIDEO OUT 1: Connect a display with HDMI input
4) VIDEO OUT 2: Connect a display with HDMI input

5
www.cablematters.com
1x2 Audio/Video Splitter
3.6 Troubleshooting Tips
 Power off everything before changing any equipment or EDID settings
 Verify that the Splitter and all connected equipment have power. The
LEDs should be lit on the Splitter
 Verify that all cables are connected to the correct input and output ports
 Verify that the correct video input and outputs are selected
 Test with the 4K EDID setting to allow the Splitter to discover the best
compatible resolution
 4K video requires a 4K source, 4K cables and 4K equipped displays
 Adjust the aspect ration and refresh rate of the video source to find test
compatibility with the output displays
 Test the cables by directly connecting the video source to the displays
 Connected displays can only be mirrored, not extended
 A ‘Not Supported’ error message may indicate that the video source
cannot support two HDCP connections
Contact [e-mail] with questions
3.5 Connection Instructions
1) Power down all the source equipment and output displays
2) Connect an HDMI cable from the video source (TV) to the VIDEO IN
3) Connect HDMI cables from the Splitter to both displays
4) Set the EDID switch to HD if using 1080p as a video resolution
5) Set the EDID switch to 4K if connecting 4K displays or another video
resolution other than 1080.
6) Connect the AC power adapter to the Splitter and to a power outlet
7) Power on the video source and output display equipment
8) Select the HDMI audio and video output from the video source
9) Select the HDMI audio and video input from the connected displays

6
www.cablematters.com
1x2 Audio/Video Splitter
4. Technical Specifications - Model 103080
Splitter Connections
HDMI Input 1 x HDMI 19-Pin Female
HDMI Output 2 x HDMI 19-Pin Female
AC Power Input 1 x 5V DC Power
Video & Audio Support
Maximum Resolution Up to 4096x2160 @ 60Hz
Audio Support LPCM 2CH, 5.1, 7.1, Dolby TrueHD, DTS-HD Master Audio
Splitter Housing
Dimensions (LxWxH) 3.9 x 2.2 x 0.6 Inches
Weight: 5.8 Ounces
AC Power Supply US Standard 5V, 5 Feet
Splitter Compliance C E, FCC, RoHS
Warranty: Limited One-Year
Note: Specifications are subject to change without notice
5. Warranty and Support
5.1 Customer Support and Contact Information
Cable Matters offers lifetime technical support as an integral part of our commitment to
provide industry leading solutions.
Email us with any questions at [e-mail].
5.2 Warranty Information
This product is backed by a limited one-year warranty. The warranty covers parts and
labor costs only. Cable Matters does not warrant its products from defects or damages
arising from misuse, abuse, or normal wear.
5.3 Limitation of Liability
In no event shall Cable Matters Inc. (including their officers, directors, employees or
agents) be liable for any damages (whether direct or indirect, special, punitive, inci-
dental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary
loss, arising out of, or related to the use of this product exceeding the actual price paid
for the product (as allowed by state law).