cable matters 202067-BLK User manual

USB-A 3.0 Data Transfer Cable
USER MANUAL

USB-A 3.0 Data Transfer Cable
Table of Contents
1. Introduction 1
1.1 Introduction
1.2 Copyright and Trademarks
2. Product Overview 2
2.1 Package Contents
2.2 Product Description
2.3 Product Features
2.4 System Requirements
3. Connection and Operation 3
3.1 Quick Start Instructions 3
3.2 Getting Started 3
3.2.1 Installation Checklist 3
3.2.2 Easy Computer Sync Software Installation 4
3.3 Data Transfer Cable Installation and Use 5
(Easy Computer Sync - Windows only)
3.3.1 Start the Easy Computer Sync Software 5
3.3.2 Mode: Synchronizing Files 5
3.3.3 Mode: Transfer Data to a New Computer 7
3.3.4 Mode: Drag & Drop Files 9
3.3.5 Mode: Remote Computer Access 9
3.4 Data Transfer Cable Installation and Use 10
(PCLinq5 – Windows & Mac)
3.4.1 PCLinq5 Software Installation 10
3.4.2 Start the PCLinq5 Software 11
3.4.3 Uninstall the PCLinq5 Program 17
3.5 Troubleshooting Notes 18
3.6 Frequently Asked Questions (FAQ) 19
4. Technical Specifications 20
5. Warranty and Support 21
5.1 Customer Support and Contact Information
5.2 Warranty Information
5.3 Limitations of Liability

USB-A 3.0 Data Transfer Cable
1
1. Introduction
1.1 Introduction
Thank you for your purchase from Cable Matters Inc., the ‘Reliable Connectivity”
company. This User Manual provides an overview of the features and installation of
your new USB-A 3.0 Data Transfer Cable. For optimum performance and safety,
please read these instructions carefully before connecting, operating or configuring this
product. Please keep this manual for future reference.
Contact [e-mail] for questions or product support.
1.2 Copyright and Trademarks
Specifications are subject to change without notice. Cable Matters is a registered
trademark or trademark of Cable Matters Inc. All rights reserved.
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
Cable Matters. Where they occur, these references are for illustrative purposes only
and do not represent an endorsement of a product or service by Cable Matters, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of this
document, Cable Matters hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in
this manual and related documents are the property of their respective holders.

USB-A 3.0 Data Transfer Cable
2
2. PRODUCT OVERVIEW
2.1 Package Contents
Please check that the following items are contained in the package:
1 x USB-A 3.0 Data Transfer Cable – 2 Meters / 6.5 Foot
1 x Card with Easy Computer Sync and PCLinq5 software download link and a
registration Code (Download from cablematters.com/downloads)
1 x User Manual (English)
2.2 Product Description
The Cable Matters USB-A 3.0 Data Transfer Cable is the perfect choice for migrating
your files when upgrading to a new Laptop or PC. The included Easy Computer Sync
&PCLinq5 software will also efficiently synchronize files between two computers in
much less time than using a network or cloud-based solution.
2.3 Product Features
Supports Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X (Not Compatible with
Windows 10 S Mode)
Fast data transfer with High Speed USB 3.0 up to 5 Gbps
Migrate personal data directly without using a network or the internet
Post transfer report with log of files transferred and any errors
Off-line Help guide is integrated into the program
Complimentary Easy Computer Sync software license key
2.4 System Requirements (Each PC)
Supported OS system: Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X
Available USB Port: USB Type A 2.0/3.0
Processor: 700 MHz or higher
System Memory: 128 MB or greater
Hard Disk Space: 200MB or higher
User Accounts with Administrator Rights in the same language
Internet access to download and update drivers

USB-A 3.0 Data Transfer Cable
3
3. Connection and Operating Instructions
3.1 Quick Start Instructions
1. Install the Easy Computer Sync or PCLinq5 software on both
computers. Use the Registration Code (a 16-character
alphanumeric code) on the included Easy Computer Sync
software full license key card.
2. Run the program from the Setup Wizard or click on the Easy
Computer Sync or PCLinq5 desktop icon to start the program.
3. Connect the Data Transfer Cable to a USB port on both computers.
4. Follow the instructions on the pop-up
menus.
NOTES:
The Easy Computer Sync software only supports for Windows system while
PCLinq5 supports both Windows and Mac OS system.
3.2 Getting Started
3.2.1 Installation Checklist
•The Registration Code (on the included Easy Computer Syncsoftware full license keycard)
is required to install the Easy Computer Sync software and allows the software to be
installed on 4 computers. Keep it in a safe place.
•Install the Easy Computer Sync software first! Both the source and target computers
require 200 MB of hard disk space to install the software.
•Check for sufficient hard disk space on both computers for transferring files.
•Most transfers require Administrator access on both computers.
•Close all unnecessary programs and run a fresh virus scan before transferring data.
•Temporarily close your anti-virus software if it prevents the software installation.
•Backup files or setup a restore point before any major migration of data.
•Both computers should be connected to a power source since transfer times can vary.
•Programs installed on the source computer cannot be transferred, they must be reinstalled.
•Do not connect the Data Transfer Cable through a USB hub
Install the software for the
Data Transfer Cable
BEFORE
connecting the cable

USB-A 3.0 Data Transfer Cable
4
•Operating systems on each computer must be using the same language.
•Verify that the USB ports on both computers are functioning and will transfer at a
minimum USB 2.0 rate.
Click on the question mark (or press F1) for access to the
off-line Help guide.
3.2.2 Easy Computer Sync Software Installation
1.Download the Easy Computer Sync Software from
www.cablematters.com/downloads
2. Install the Easy Computer Sync software.
3. When prompted, click ‘YES’ to allow the program to be installed and start the Easy
Computer Sync Setup Wizard.
4. License Agreement: Click ‘I Agree’.
5. Choose Components: Create a Desktop Icon
and allow updates. (Recommended)
6. Choose Install Location: Keep the default
location and click ‘Install’. (Recommended)
7. Click ‘Finish’ and check the box to allow the
program to run.
Enter the Registration Code from
the Easy Computer Sync
software full license key card.
The Registration Code looks like XXXX-XXXX-XXXX-XXXX
and allows the software to be installed on 4 computers.
Keep it in a safe place for future reference.
Install the software
BEFORE
connecting the cable
200MB of Hard Disk
space is required on
both computers.

USB-A 3.0 Data Transfer Cable
5
The software can be uninstalled from the
Control Panel > Programs
3.3 Data Transfer Cable Installation and Use
(Easy Computer Sync - Windows only)
3.3.1 Start the Easy Computer Sync Software
There are 3 ways to start the software on BOTH computers:
1. Double-click the Easy Computer Sync desktop icon on source and target
computers to start the program. Click ‘Yes’ and connect the cable.
2. Use the program from the Start Menu, Click ‘Yes’ and connect the cable.
Windows XP, Vista: Start Menu > All Programs > Easy Computer Sync
Windows 7, 8, 8.1, 10 Start Menu > Search for Easy Computer Sync
3. Connect the Data
Transfer Cable to the
USB ports of both
computers: Click ‘Next’
until you see
‘Connection Detected!’
XP and Vista Users: If your computer does not recognize the Data Transfer Cable you
may need to update Windows drivers and check that your computer has the latest
updates.
3.3.2 Mode: Synchronizing Files
1. Select Sync Files in the Tools screen to
synchronize files BETWEEN computers.
Choose a folder or create a new one to
synchronize files for one-time use or an on- going
basis.

USB-A 3.0 Data Transfer Cable
6
2. Choose the folders to synchronize between both computers.
‘Add Folder’ button: Select to add or create additional folders.





‘Options’ Button: Changes default settings:
•Choose the file transfer direction
•Manage file conflicts
3. Select ‘Next’ to start the synchronization:
If ‘Ask me what to do’ was selected from the Sync
Options Menu, a ‘File Conflict’ screen will prompt for a
choice.
Click on the question mark
(or press F1) for access to
the off-line Help guide.

USB-A 3.0 Data Transfer Cable
7
A synchronization screen will appear followed by the
‘Finished’ screen.
A list of files sent and received is presented.
Click ‘View Log’ to receive a detailed report of the files
transferred, including any errors.
4. Click ‘Exit’ to finish.
The software will automatically close on both computers.
3.3.3 Mode: Transfer Data to a New Computer
1. Select Transfer Data to a New
Computer in the Tools screen to migrate data
from an old to a new computer.
2. The software automatically chooses default
folders to transfer or you can customize the
selections.
3. Select Old or New computer to tell the software
where to transfer the data FROM and TO.
The software will search for items to transfer and
present a screen of folders
The old computer displays a screen indicating
‘Transfer in Progress’

USB-A 3.0 Data Transfer Cable
8
4. Select the items to be transferred.
Click ‘Add Folder’ to select or create
additional folders.
Choose only the necessary folders to be transferred to save disk space on the
target computer and minimize the time needed for the file transfer.
Click on a drive and hit 'Properties' to open the
screen for choosing a different drive on the
target computer.
Click on a folder and select ‘Properties’ to open the
screen for mapping the location of a folder on the
target computer.
5. Select ‘Next’ to start the synchronization:
If there is a conflict a ‘File Conflict’ screen will prompt
for a choice.
A synchronization screen
will appear followed by the
‘Finished’ screen.
A list of files sent and received is presented.
!!! Moving or modifying
‘Protected Folders’ can
damage your computer.

USB-A 3.0 Data Transfer Cable
9
Click ‘View Log’ to receive a detailed report of the files
transferred including any errors.
6.Click ‘Exit’ to finish.
The software will automatically close on both computers.
3.3.4 Mode: Drag & Drop Files
1. Select Drag & Drop Files in the Tools screen to
manually transfer files and folders BETWEEN
computers.
2. Choose files or folders and simply drag
them to the desired location.
3. Press ‘Return to Sync’ to return to the
Main Menu.
3.3.5 Mode: Remote Computer Access
1. Selecting Control Other Computer allows you to
view the connected computer from your computer for
convenience or when you only have one monitor.
2. Connect the remote computer to the monitor to
start the Easy Computer Synch software and then
switch it back to the controlling computer.
Use caution in ‘Show’ System
Folders or Hidden Files.
Improper use could make
your computer unusable!

USB-A 3.0 Data Transfer Cable
10
Control most non-security
functions with your keyboard and
mouse.
3. When finished, use ‘Back to
Tools’ or ‘Exit’ on the pull-down
menu on the top left of the
Remote Connection screen.
Access the Remote Connection with
the ‘S’ icon on the Taskbar.
3.4 Data Transfer Cable Installation and Use (PCLinq5 – Windows & Mac)
PCLinq5 is a user-friendly file manager software that allows you to see and
control file directories on both computers at the same time. You can easily
drag-and-drop or cut-and-paste files and folders between computers as well
as creating new folders and changing file attributes. You can also open any
including photos and videos.
3.4.1 PCLinq5 Software Installation
1. Connect the USB-A 3.0 Data Transfer Cable to the USB ports of both
computers. You can go to the Control Panel–System–Device Manager
to view the device properties. You should see “USB-To-USB Cable
Bridge” device under the Universal Serial Bus Devices. PCLinq5
Software installer is stored within the cable, or can be
downloaded from www.cablematters.com/downloads

USB-A 3.0 Data Transfer Cable
11
2. Install the PCLinq5 Software on both computers. The installation
process starts from the InstallShield Wizard that will guide you through
the rest of the setup process.
3. License Agreement: Click ‘I accept the terms of the license agreement’.
Follow the instructions and click Next to continue until installation is
complete.
4. After installation, click Start and Program Files and check whether the
Prolific PCLinq5 folder was created.
3.4.2 Start the PCLinq5 Software
PCLinq5 is an application used to control the file sharing and data transfer of the
linked computers (also known as the local PC and the remote PC). After you have
successfully completed the PCLinq5 installation and connected the Data Transfer

USB-A 3.0 Data Transfer Cable
12
cable, you simply click and start PCLinq5 in both computers. The PCLinq5 File
Transfer program will appear as follows:
Mac: Windows:
Using PCLinq5, you can control both the local and remote computers and do the
following:
•Display files/folders
•Open files/folders
•Create files/folders
•Delete files/folders
•Copy/Cut/Paste files/folders
•Move files/folders
•Change file/folder names/attributes

USB-A 3.0 Data Transfer Cable
13
Start PCLinq5:
1. Run PCLinq5 on both computers.
2. Connect 2 computers using the USB-A 3.0 Data Transfer cable.
3. Wait for Windows to detect the cable on each computer and check whether it
is properly installed. Check the Connection Status LED on the bottom right.
Make sure that the program shows two green LEDs to indicate a linked
connection.
4. Once connected, you simply drag-and-drop the files or folders you want to
transfer to the other computer. You can change disk drives or directories by
clicking on the Navigate directory menu. Use the Menu Controls for other
functions of the program.
Windows: Mac:
NOTE: You may not be able to drag-and-drop some folders and files from Windows Vista/7/8 to Windows XP due to Windows Vista/7/8
permission security feature. Permissions are rules associated with objects on a computer or network, such as files and folders. You would
need to grant permission or ownership first to those files/folders for you to be able to transfer them from your Windows Vista/7/8 to
Windows XP computer if needed. Another solution to this problem is to use your Windows XP computer to drag the files/folders from
Windows Vista/7/8 toXP.

USB-A 3.0 Data Transfer Cable
14
5. Right-click the file or folder (example: Pictures) in Windows Vista/7/8 PC, and
then click Properties. Click the Security tab and click Edit to change
permissions.
6. Click Add button to add user.

USB-A 3.0 Data Transfer Cable
15
7. Type “Everyone” user name to add to the group.
8. Click on the Allow boxes to grant Full control and Modify permissions. Click OK
to confirm. You can now drag-and-drop this folder from Windows Vista or 7 or 8
to XP using PCLinq5 software.

USB-A 3.0 Data Transfer Cable
16
9. PCLinq5 also allows you open/run files found in the connected PC without
copying the files to this PC. You can directly play movie files located in the
remote PC.
10. PCLinq5 also provides Options to show hidden, read-only, system files and
directories.

USB-A 3.0 Data Transfer Cable
17
3.4.3 Uninstalling the PCLinq5 Program
It is easy to uninstall the PCLinq5 program:
1. Unplug the Data Transfer cable and close the PCLinq5 program.
2. Go to Apps & features. Find the PCLinq5 program and click Uninstall button.
3. The PCLinq5 InstallShield Wizard program will appear. Click the Remove button
and select to remove all installed features. Make sure that you have unplugged
the Data Transfer cable and click Next to continue.
4. The PCLinq5 InstallShield Wizard program will confirm with you if you really
want to completely remove the application and features. Click Yes to uninstall.
5. Wait for the InstallShield Wizard program to complete uninstallation.

USB-A 3.0 Data Transfer Cable
18
3.5 Troubleshooting Notes
Contact [e-mail] with any questions.
My computer does not recognize the Data Transfer Cable:
Make sure that you have downloaded and installed both the Easy Computer Sync software
and the latest drivers from Windows.
Check that both LED’s are lit. Switch ends to test.
Check that the USB ports are functioning by plugging in another USB device.
Remove all other USB devices and find ‘USB-To-USB Cable Bridge’ in the Device Manager:
It should NOT have a “question” or “exclamation” mark
The file transfer speed is too slow:
Check that the computer port supports USB 3.0.
Having problems getting Easy Computer Sync to move past the connection screen:
•Check that both computers have Easy Computer Sync installed
•Check that both computers connected with the Data Transfer Cable
•Plug the Easy Transfer Cable directly into your computers (not through a hub)
•If the cable is connected, but you are stuck on the connection screen on both
computers, recheck the connection, or try using a different port on each computer.
•If you are still having problems establishing the connection, unplug all non-essential
USB devices (such as printers, scanners, external drives) from each computer.