Cables to Go 29350 User manual

1
USER GUIDE
USB V1.1 RECEIVER DONGLE
Model: 29350

1
Introduction......................................................................................................................................................2
Features...........................................................................................................................................................3
Package Contents............................................................................................................................................4
Device Installation............................................................................................................................................5
Technical Specifications..................................................................................................................................7
Cables To Go One Year Warranty...................................................................................................................8
Important Safety Information...........................................................................................................................9
TABLE OF CONTENTS

2
Thank you for purchasing the USB v1.1 Receiver Dongle. This device is one component of a complete
solution designed to conquer USB length limitations and put your USB 1.1 devices where you want them.
This solution extends the distance of a USB device to a host computer up to 150ft so you can place your
USB projector, camera, printer, or any other USB device exactly where you want it! The USB v1.1 Receiver
Dongle is powerful yet simple, with no drivers to install or special software required.
The transmitter/receiver pair is connected via standard Cat5, Cat5e, or Cat6 UTP cable allowing for easy
installation. The USB v1.1 Receiver Dongle is bus powered, so no external power source is needed. This
unit is designed to work with Cables To Go part numbers: 29349, 29344, or 29348. We recommend that
you read this manual thoroughly and retain for future reference.
INTRODUCTION

3
Extends the functional distance of a USB signal, allowing a USB device to function with a USB-enabled
computer up to 150ft away
Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, or any
other USB device
Bus-powered so no external power source is required
Uses standard cat5/cat5E/cat6 patch cords (not included), allowing for easy use and flexibility
Compliant with USB Specification 1.1
FEATURES

4
USB v1.1 Receiver Dongle
User Guide
PACKAGE CONTENTS

5
Step 1
Install the USB transmitter (29349, 29344, or 29348) by means of wall plate, if using wall plate style
transmitter, or connect the Dongle style transmitter to your computer.
Step 3
Using a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable to connect the USB
transmitter and USB Receiver Dongle.
Step 4
Plug your computer into the source end (USB transmitter end) using a standard USB A/B cable.
Step 5
Plug your USB enabled device into the USB Dongle Receiver using a standard USB A/B, A/mini-B or
proprietary USB cable that came with your device.
Step 6
Turn your computer/source on and you can begin to use your USB devices.
DEVICE INSTALLATION

6
Note: We recommend using a solid 24AWG Cat5/Cat6 patch cable when connecting this transmitter
with a receiver unit.
Example Application: (shown being used with Cables To Go USB SuperBooster Wall Plate Transmitter-
#29344)
DEVICE INSTALLATION
USB Cable A/B
Cat5/6 Patch CableUSB Cable # 29344

7
Product No. 29350
Complies USB Rev. Ver. 1.1
USB Type A female/
Connectors RJ45 female
Power Mode Bus
Cable Length 6in.
Product Weight .05 lbs
Product Color Black
TECHNICAL SPECIFICATIONS

8
At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year
warranty on this device. If you experience problems due to workmanship or material defect for the duration
of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA)
number, contact customer service at 1-800-506-9606 or www.cablestogo.com.
Cables To Go
3555 Kettering Blvd.
Moraine, OH 45439
1-800-506-9607
www.cablestogo.com
CABLES TO GO™ONE YEAR WARRANTY

9
! Liquid:
If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit.
Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the
product.
! Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.
!THERE ARE NO USER SERVICEABLE PARTS
Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the
unit and refer to the warranty information section of this manual.
IMPORTANT SAFETY INFORMATION

10

11
VER.1.0.4.3.09