Cadi Cadi.Sense User manual

Cadi.Sense
Wireless Thermometer
User Manual
v3.21.3
T-S1-800.900-I10-C01

Cadi.Sense User Manual
T-S1-800.900-I10-C01 2
Contents
1. Introduction ........................................................................................................................ 3
1.1 Welcome message ........................................................................................................... 3
1.2 User manual version.......................................................................................................... 3
1.3 Important safety information ........................................................................................... 3
1.4 Intended use ...................................................................................................................... 4
1.5 Package contents............................................................................................................. 4
1.6 How does the Cadi.Sense work? .................................................................................... 5
1.7 Fever and normal body temperature ............................................................................ 5
2. How to set up and use the Cadi.Sense.......................................................................... 6
2.1 Overview............................................................................................................................. 6
2.2 Setup I – Performing a quick setup................................................................................. 6
2.3 Setup II – Setting up to access Cadi.Sense from outside your home ....................... 7
2.4 Setup III (Advanced) – Performing port forwarding to access your SmartNode
from outside your home................................................................................................... 9
2.5 Using your iPhone or Android app to access Cadi.Sense ........................................ 10
2.6 Understanding the SmartNode LEDs............................................................................. 11
2.7 Understanding the Cadi.Sense icons on your SmartNode webpages ................... 12
2.8 How to attach the ThermoSensor.................................................................................. 14
2.9 How to clean and store the ThermoSensor and the SmartNode ............................. 16
3. Advanced features ......................................................................................................... 17
3.1 Changing the SmartNode password............................................................................ 17
3.2 Resetting the SmartNode ............................................................................................... 18
3.3 Upgrading the SmartNode firmware ............................................................................ 18
4. Others ................................................................................................................................19
4.1 Troubleshooting and frequently asked questions (FAQ)........................................... 19
4.2 Getting technical support.............................................................................................. 20
4.3 Standards compliance................................................................................................... 20
4.4 Specifications................................................................................................................... 21
4.5 More about port forwarding .......................................................................................... 23
4.6 More about the SmartNode........................................................................................... 27

Cadi.Sense User Manual
T-S1-800.900-I10-C01 3
1. Introduction
1.1 Welcome message
Thank you for choosing the Cadi.Sense Wireless Thermometer. This thermometer allows you to
monitor your loved ones’ temperature without disturbing their rest and play.
Read this manual carefully and follow all instructions and warnings.
1.2 User manual version
Version: C01
Release date: November 19, 2012
This user manual is subject to change or upgrade without notice.
To view the latest user manual, go to www.cadisense.com.
1.3 Important safety information
DO NOT use the Cadi.Sense or any electrical part that comes with the package if
there is any visible damage.
DO NOT force open or attempt to service the Cadi.Sense or any electrical part that
comes with the package. If you encounter any technical problem, contact Technical
Support.
DO NOT use the Cadi.Sense on users who have an implanted cardiac device such as
a pacemaker or an internal cardioverter-defibrillator (ICD). This is to avoid
electromagnetic interference (EMI) between the ThermoSensor and the implanted
device.
DO NOT place the ThermoSensor or dressing over injured, broken, or scarred skin.
DO keep the dressing and the ThermoSensor dry. This is because water trapped
between the ThermoSensor and the skin or dressing may affect the temperature
reading.
DO NOT allow babies or young children to handle the loose or detached
ThermoSensor, so as to prevent choking accidents.
The use of this product is not intended as a substitute for consultation with your doctor.

Cadi.Sense User Manual
T-S1-800.900-I10-C01 4
1.4 Intended use
The Cadi.Sense wireless thermometer is intended for use in children for monitoring body
temperature continuously and automatically.
1.5 Package contents
ThermoSensor (with storage case)
SmartNode (plug)

Cadi.Sense User Manual
T-S1-800.900-I10-C01 5
Stick-Ons (adhesive dressing)
1.6 How does the Cadi.Sense work?
In the Cadi.Sense, skin temperature is measured at the lower abdomen by a wireless sensor
called the ThermoSensor. The readings are sent wirelessly every 30 seconds to a receiver
called the SmartNode and converted to an equivalent body temperature, which can be
viewed via WiFi from a mobile device such as a smartphone.
1.7 Fever and normal body temperature
The body temperature of a person depends on where it is measured, how it is measured,
when it is measured and how old the person is. In addition, the range of normal body
temperature varies from person to person. Different methods of measuring body temperature
generally give different readings and, therefore, different ranges of normal temperature.
Temperatures measured with the Cadi.Sense are on average higher than armpit (axillary)
temperatures but lower than ear temperatures*.
It is recommended that you determine your child’s normal temperature when measured
using the Cadi.Sense, by carrying out the measurement for at least 24 hours when the child is
healthy. As a reference, a Cadi.Sense temperature above 37.8°C may suggest that your
child has a fever. However, do not self-diagnose but do consult your doctor for medical
advice.
*Ng K-G, Wong S-T, Lim S-M, Goh Z. Evaluation of the Cadi ThermoSENSOR wireless skin-contact thermometer against
ear and axillary temperatures in children. Journal of Pediatric Nursing 2010; 25:176–186. [View abstract at
http://www.ncbi.nlm.nih.gov/pubmed/20430278].

Cadi.Sense User Manual
T-S1-800.900-I10-C01 6
2. How to set up and use the Cadi.Sense
2.1 Overview
Before using the Cadi.Sense, you will need to do the following:
1. Set up the system for wireless access, by following the instructions in Sections 2.2, 2.3,
2.4, and 2.5.
2. Understand the LED indicators and Cadi.Sense icons, by reading Sections 2.6 and 2.7
respectively.
3. Know how to attach the ThermoSensor to the patient, by following the instructions in
Section 2.8.
4. Know how to clean and store SmartNode and the ThermoSensor after each use, by
reading Section 2.9.
2.2 Setup I – Performing a quick setup
This setup enables you to access temperature readings at home from a mobile device.
Step 1:
Get ready a mobile device (iPhone, Android phone, tablet, or laptop) and record the
following information shown on your SmartNode plug:
SSID (e.g., CADI_XXXX): ____________________
PWD (8 chars): ____________________
SmartNode ID: ____________________
Step 2:
Plug in the SmartNode to a power socket in the same room where the patient will be
resting. Then switch it on. (Note: The SmartNode takes about 30 seconds to start up.)
Step 3:
Turn on WiFi on your mobile device. Look for the above SmartNode SSID in the wireless
network list. Then connect the mobile device to the SmartNode using the above
password (PWD, 8 chars).
Note: Some mobile devices may ask for the “network key”, which is the same as the
password.
Step 4:
Go to your mobile device’s web browser and enter
http://10.10.10.10
If Figure 1 appears, select your timezone and click “Save”. Otherwise Figure 2 will appear.
The quick setup is now done!
Note: After completing Setup I, you will need to proceed with Step II in order to access
the Internet.

Cadi.Sense User Manual
T-S1-800.900-I10-C01 7
Figure 1.
Setting date, time, and
timezone.
Figure 2.
Main page
(sensor details).
Figure 3.
Home page
(temperature monitoring).
Note: After you have set the date, time, and timezone, Figure 2 will appear. The sensor ID
will be shown and the temperature will be displayed as “--” or “Lo”. If the sensor is still in its
storage case, the reading will be displayed as “--”. If the sensor has been taken out from
its storage case for more than 30 seconds, you may see “Lo” after clicking the “Refresh”
icon . If you warm up the sensor by rubbing it in your hands for more than 1 minute
and then click the “Refresh” icon, you may see a numerical temperature value. If you
click the “Home page” icon ,Figure 3 will appear.
2.3 Setup II – Setting up to access Cadi.Sense from outside your home
This setup enables you to connect your mobile device to the Internet, so that you can access
temperature readings from outside your home via the Internet.
Requirements:
1. You must first complete Setup I in Section 2.2.
2. You will need to have a WiFi router that is already set up and connected to the
Internet, and you will need to be physically at the place where your WiFi router is. You
will also need to know your WiFi router’s SSID and password. Check with your Internet
service provider if you do not remember the SSID and/or password.
Step 1:
Click the “Advanced Settings” icon and Figure 4 will appear (if you cannot see the
“Advanced Settings” icon, click the “Main Page” icon first). Click the “Connect to
WiFi Router” icon. When a screen (see Figure 5) appears and asks “Please select your WiFi
router”, look for your router’s SSID. If your router’s SSID does not show up on the screen,
click “Refresh” repeatedly until it appears. Then click your router’s SSID, type in your
router’s password, and then click “Apply”. Be patient as the SmartNode needs about 1
minute to connect to your WiFi router and about 1 minute to reboot.

Cadi.Sense User Manual
T-S1-800.900-I10-C01 8
Figure 4.
Advanced settings menu.
Figure 5.
Connecting to your WiFi router.
Figure 6.
Successful connection.
If the connection is successful, the following text will appear: “SmartNode is now
connected to xxxxxx. To access SmartNode, please go to www.cadisense.com or use the
LAN URL. Please be patient as SmartNode needs about a minute to reboot.” Figure 6 will
then appear. However if the connection is not successful, the following text will appear:
“Connection failed, please reboot SmartNode and try again”.
Note: After successful connection to your WiFi router, the SmartNode will remember your
router’s SSID and password, unless you have intentionally unmarked the default
“Remember Settings” during the connection. Therefore, if you were to switch the
SmartNode off and on again, it will automatically reconnect to your WiFi router in about 2
minutes.
Step 2:
After successful connection to your WiFi router, you may not be able to use
“http://10.10.10.10” to access your SmartNode anymore, but you can still access it using
the LAN URL displayed on the screen (in the example shown in Figure 6, the LAN URL is
http://10.0.0.84). Record this LAN URL as you may need to use it later.
Step 3:
You may now use a mobile device (iPhone, Android phone, tablet or laptop) to access
your Cadi.Sense from anywhere in the world! Go to “www.cadisense.com”, and then
click “Access Cadi.Sense”. Type in your SmartNode ID (which can be found on your
SmartNode; you should have written it in Step 1 of Section 2.2). The password is “cadi”,
and the default port is “50000”. Then click “Login”.
If your router is UPnP-enabled or if you have set up port forwarding (see Section 2.4),
Figure 8 will appear, which means you are able to access SmartNode webpages as you
would in Section 2.1. If Figure 8 does not appear, Figure 7 will appear.

Cadi.Sense User Manual
T-S1-800.900-I10-C01 9
Figure 7. Cadi.Sense page without UPnP/port forwarding setup.
Figure 8. Cadi.Sense page with UPnP/port forwarding setup.
2.4 Setup III (Advanced) – Performing port forwarding to access your
SmartNode from outside your home
This setup enables you to view your SmartNode webpages from outside your home via the
Internet.
Note: You do not need to perform this setup if you have been able to see Figure 8 in the
previous setup.
Note: This section is for advanced users only. DO NOT PROCEED IF YOU ARE NOT FAMILIAR
WITH PORT FORWARDING.
Requirements:
1. You must first complete Setup 1 in Section 2.2 and Setup II in Section 2.3.
2. You will need to be physically at the place where your WiFi router is, and you will also
need to know your WiFi router’s admin password, if any. Check with your Internet
service provider if you do not remember the password.
Step 1:
(You may skip this step if you already know the LAN IP address of your WiFi router.) Go to
your mobile device’s web browser and enter the LAN URL (see Section 2.3, Step 2). Click
the “Advanced settings” icon ,“MENU” icon, “More Settings” icon, and then the “IP
Settings” icon. Record the following information shown on the screen:

Cadi.Sense User Manual
T-S1-800.900-I10-C01 10
Gateway:
(this is the LAN IP address of your WiFi router)
Step 2:
Go to your mobile device’s web browser, enter the LAN IP address of your WiFi router,
and then type in your WiFi router’s admin password, if any.
Step 3:
Find the UPnP setting and enable it. (Note: Some routers may not have this feature.) You
may have to reboot your WiFi router for the setting to take effect (check your WiFi router’s
manual). You may have to reboot the SmartNode by switching it off and on again; this
reboot will take about 1 minute.
Step 4:
If the UPnP feature is not available or not working, you will have to carry out manual port
forwarding. Basically, the objective of manual port forwarding is to instruct your WiFi
router to allow external (outside home) access of your SmartNode. Different routers may
have different ways and names for carrying out port forwarding (also called virtual
server), but the main information to be keyed into your WiFi router is similar:
(1) Device IP Address (also called Local IP): the LAN URL (see Section 2.3, Step 2), which is
the LAN IP address of the SmartNode
(2) Public Port (also called external port): 50000
(3) Private Port (also called internal port, local port, or host port): 80
(4) Protocol: TCP
(5) Enable: Yes
Note (a): See Section 4.5 (“More about port forwarding”) for details on several different
WiFi routers.
Note (b): You may have to reboot your WiFi router for the settings to take effect (please
check with your WiFi router’s manual). You may have to reboot the SmartNode by
switching it off and on again; this reboot will take about 1 minute.
2.5 Using your iPhone or Android app to access Cadi.Sense
This setup enables you to access temperature readings from your iPhone or Android
smartphone by means of a specially created software application called “Cadi.Sense”.
Requirements:
If you are using a smartphone, download the Cadi.Sense app from the iPhone App Store
or Android Market. It is an electronic health journal that helps to keep track of your
children’s health throughout their growth. In addition, it also allows wireless monitoring of
your children’s temperature anytime, anywhere.
Step 1:
After installing and setting up the Cadi.Sense app, click “+” on the home tab and enter
the necessary information to create a new profile for your child.