Calspas PATIO User manual

LTR20171001, Rev. B
4/18/17

Preparing for Your New Portable Spa
Pre-Delivery Checklist. . . . . . . . . . . . . . . . . . 3
Planning the Best Location . . . . . . . . . . . . . . 3
Preparing a Good Foundation . . . . . . . . . . . . 4
230V / 50 Hz Electrical Installation . . . . . . . 5
Filling and Powering Up Your Portable Spa12
Priming the Pump . . . . . . . . . . . . . . . . . . . . 15
Operating Your Spa
TP400 and TP600 Control Panel Operation 17
TP800 Control Panel Operation . . . . . . . . . 26
Cal Spas Hot Tub Wi-Fi App . . . . . . . . . . . . 31
CloudService........................33
Electrical Power Efciency .............34
Adjustable Jets . . . . . . . . . . . . . . . . . . . . . . 34
LEDLighting.........................34
DiverterKnobs.......................35
Waterfalls ..........................35
AirVenturis .........................35
Hydro Streamer Waterfall. . . . . . . . . . . . . . 35
Adjustable Therapy System . . . . . . . . . . . . 36
Microsilk Therapy System . . . . . . . . . . . . . . 36
Pure Cure™ Water Sanitizer . . . . . . . . . . . . 37
Ozonator ...........................37
Bromine Generator . . . . . . . . . . . . . . . . . . . 38
Intelligent Controller Codes for the Bromine
Generator...........................39
Troubleshooting Water Clarity Problems . . 40
Cleaning and Maintenance
Removing and Reseating
thePillows..........................41
Jet Removal and Replacement . . . . . . . . . . 41
Draining Your Portable Spa . . . . . . . . . . . . 42
Winterizing (Cold Climate Draining) . . . . . 43
VacationCare........................43
SpaCover...........................44
FilterCleaning.......................44
Cleaning Your Spa . . . . . . . . . . . . . . . . . . . . 45
Changing the UV Lamp . . . . . . . . . . . . . . . . 46
Maintenance Schedule . . . . . . . . . . . . . . . . 47
Using the Entertainment System
Aquatic AV AQ-DM-5UBT. . . . . . . . . . . . . . . 48
Using the Freedom Sound System . . . . . . . 51
Keeping Fit With Your Swim Spa
Jetstream Propulsion System . . . . . . . . . . . 52
Assembling the Swim Tether . . . . . . . . . . . 52
Using the Exercise Equipment . . . . . . . . . . 52
Appendix
Replacement Parts . . . . . . . . . . . . . . . . . . . 54
Basic Troubleshooting. . . . . . . . . . . . . . . . . 63
Copyright 2017 Lloyd’s Material Supply, Inc. All rights reserved. Duplication without written
consent is strictly prohibited.
Cal Spas™, Adjustable Therapy System™, ATS™, Cal Premium™, Cal Select™, Cal Stone™,
Ultimate Fitness Spa Series™, and XL Heat Exchanger™ are registered trademarks.
Due to continuous improvement programs, all models, operation, and/or specications are
subject to change without prior notice.
LTR20171001, Rev. B
4/18/17
CONTACT INFORMATION
For customer service, please contact
your authorized dealer immediately. If
you need additional information and/
or assistance, please contact:
LMS Customer Service Department
1462 East Ninth Street
Pomona, CA 91766.
Phone: [phone]
Fax: [phone]
Table of Contents

2017 Portable Spa
LTR20171001, Rev. B
Read This First!
www.calspas.com
1
READ AND FOLLOW ALL INSTRUCTIONS.
DANGER -- Risk of accidental drowning:
Do not allow children to be in or around a spa
unless a responsible adult supervises them. Keep
the spa cover on and locked when not in use. See
instructions enclosed with your cover for locking
procedures.
DANGER -- Risk of injury:
The suction ttings in this spa are sized to match
the specic water ow created by the pump. Should
the need arise to replace the suction ttings, or the
pump, be sure the ow rates are compatible.
Never operate the spa if the suction tting or lter
baskets are broken or missing. Never replace a
suction tting with one that is rated less than the
ow rate marked on the original suction tting.
DANGER -- Risk of electric shock:
Install the spa at least 1.5 meters from all metal
surfaces. As an alternative, a spa may be installed
within 5 feet of metal surfaces if each metal surface
is permanently bonded by a minimum #8 AWG solid
copper conductor to the outside of the spa’s control
box.
Do not permit any external electrical appliances,
such as lights, telephones, radios, televisions, and
etc., within ve feet of the spa. Never attempt to
operate any electrical device from inside the spa.
Replace a damaged power cord immediately.
Do not bury the power cord.
Connect to a grounded, grounding-type receptacle
only.
HYPERTHERMIA DANGER:
Prolonged exposure to hot air or water can induce
hyperthermia. Hyperthermia occurs when the internal
temperature of the body reaches a level 2°C to 4°C
(1°C to 2°C) above the normal body temperature of
37°C (98.6°F). While hyperthermia has many health
benets, it is important not to allow your body’s core
temperature to rise above 39.5°C (103°F).
Symptoms of excessive hyperthermia include
dizziness, lethargy, drowsiness and fainting. The
effects of excessive hyperthermia may include:
• Failure to perceive heat
• Failure to recognize the need to exit spa or hot
tub
• Unawareness of impending hazard
• Fetal damage in pregnant women
• Physical inability to exit the spa
• Unconsciousness
WARNING: The use of alcohol, drugs, or medication
can greatly increase the risk of fatal hyperthermia.
WARNING -- To reduce the risk of injury:
The spa water should never exceed 40°C (104°F).
Water temperatures between 38°C and 40°C (100°F
and 104°F) are considered safe for a healthy adult.
Lower water temperatures are recommended for
young children and when spa use exceeds 10 minutes.
High water temperatures have a high potential for
causing fetal damage during pregnancy. Women who
are pregnant, or who think they are pregnant, should
always check with their physician prior to spa usage.
The use of alcohol, drugs or medication before or
during spa use may lead to unconsciousness, with
the possibility of drowning.
Persons suffering from obesity, a medical history of
heart disease, low or high blood pressure, circulatory
system problems or diabetes should consult a
physician before using the spa.
Persons using medications should consult a physician
before using the spa since some medications may
induce drowsiness while others may affect heart rate,
blood pressure and circulation.
Important Safety Instructions

2017 Portable Spa
LTR20171001, Rev. B
Read This First!
www.calspas.com
2
SAVE THESE INSTRUCTIONS.
WARNING: People with infectious diseases should not use a spa or hot tub.
WARNING: To avoid injury, exercise care when entering or exiting the spa or hot tub.
WARNING: Do not use drugs or alcohol before or during the use of a spa or hot tub to avoid unconsciousness
and possible drowning.
WARNING: Do not use a spa or hot tub immediately following strenuous exercise.
WARNING: Prolonged immersion in a spa or hot tub may be injurious to your health.
CAUTION: Maintain water chemistry in accordance with manufacturer’s instructions.

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
3
Most cities and counties require permits for exterior
construction and electrical circuits. In addition, some
communities have codes requiring residential barriers
such as fencing and/or self-closing gates on property
to prevent unsupervised access to the property by
children under the age of 5. Your dealer can provide
information on which permits may be required and
how to obtain them prior to the delivery of your spa.
For additional operating and installation information,
please see your selling dealer.
Before Delivery
Plan your delivery route
Choose a suitable location for the spa
Lay a 5 - 8 cm concrete slab
Install dedicated electrical supply
After Delivery
Place spa on slab
Connect electrical components
Preparing for Your New Portable Spa
Pre-Delivery Checklist
Planning the Best Location
Safety First
Consider How You Will Use Your Spa
Plan for Your Environment
Consider Your Privacy
Provide a View with Your Spa
Keep Your Spa Clean
Allow for Service Access
Do not place your spa within 10 feet (3 m) of
overhead power lines.
How you intend to use your spa will help you
determine where you should position it. For example,
will you use your spa for recreational or therapeutic
purposes? If your spa is mainly used for family
recreation, be sure to leave plenty of room around
it for activity. If you will use it for relaxation and
therapy, you will probably want to create a specic
mood around it.
If you live in a region where it snows in the winter
or rains frequently, place the spa near a house
entry. By doing this, you will have a place to change
clothes and not be uncomfortable.
In a cold-weather climate, bare trees won’t provide
much privacy. Think of your spa’s surroundings
during all seasons to determine your best privacy
options. Consider the view of your neighbors as well
when you plan the location of your spa.
Think about the direction you will be facing when
sitting in your spa. Do you have a special landscaped
area in your yard that you nd enjoyable? Perhaps
there is an area that catches a soothing breeze
during the day or a lovely sunset in the evening.
In planning your spa’s location, consider a location
where the path to and from the house can be kept
clean and free of debris.
Prevent dirt and contaminants from being tracked
into your spa by placing a foot mat at the spa’s
entrance where the bathers can clean their feet
before entering your spa.
Many people choose to install a decorative structure
around their spa. If you are installing your spa with
any type of structure on the outside, such as a
gazebo, remember to allow access for service. It is
always best to design special installations so that
the spa can still be moved, or lifted off the ground.

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
4
Your spa needs a solid and level foundation. The area
that it sits on must be able to support the weight
of the spa and the occupants who use it. If the
foundation is inadequate, it may shift or settle after
the spa is in place, causing stress that could damage
your spa shell or nish.
Damage caused by inadequate or improper
foundation support is not covered by the
warranty. It is the responsibility of the
spa owner to provide a proper foundation
for the spa.
Place the spa on an elevated 10 cm concrete slab.
Pavers, gravel, brick, sand, timbers or dirt foundations
are not adequate to support the spa.
We strongly recommended that you have a qualied,
licensed contractor prepare the foundation for your
spa.
If you are installing the spa indoors, pay close
attention to the ooring beneath it. Choose ooring
that will not be damaged or stained.
If you are installing your spa on an elevated wood
deck or other structure, it is highly recommended
that you consult a structural engineer or contractor
to ensure the structure will support the weight of 732
kg / m2 (150 lbs / ft2).
To properly identify the weight of your new spa
when full, remember water weighs 1 kg per liter. For
example, an average 2.4 meter (8 foot) spa holds
approximately 1892 liters of water. Using this formula,
you will nd that the weight of the water alone is
1892 kg. Combined with the dry weight of the spa
you will note that this spa will weigh approximately
2267 kg when full of water.
Preparing a Good Foundation

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
5
601
2100
601
2100
601
2100
Yes
No
Yes
Yes
No
No
START
HERE
Is this for a
fitness spa?
See diagram 1
on page 6.
See diagram 2
on page 7.
See diagram 1
on page 6.
See diagram 2
on page 7.
See diagram 3
on page 8.
See diagram 4
on page 9.
See diagrams 5
and 6 on pages
10 and 11.
Which control
system does it
use?
Which control
system does it
use?
Which control
system does it
use?
Does it have
the optional
5.5 kW heater?
Is this for a
F1770E?
All 230V spas must be permanently connected
(hard wired) to the power supply. These instructions
describe the only acceptable electrical wiring
procedure. Spas wired in any other way will void your
warranty and may result in serious injury.
This is the only acceptable electrical wiring procedure.
Spas wired in any other way will void your warranty.
See the wiring requirements below and wiring
diagrams on page 6 through page 11.
The electrical wiring of this spa must meet the
requirements of any applicable local, state, and
federal codes. The electrical circuit must be installed
by an electrical contractor and approved by a local
building / electrical inspector.
The power supplied to the spa must be on a dedicated
RCD protected circuit with no other appliances or
lights sharing the power.
Use copper wire with THHN insulation. Do not use
aluminum wire.
Use the tables below to determine your RCD and
wiring requirements.
When wires larger than #6 AWG are required, install
a junction box near the spa and use #6 AWG wire
between the junction box and the spa.
Wires that run over 25 meters must increase wire
gauge to the next lower number. For example: A
normal 50 amp RCD with three #8 AWG copper wires
that run over 25 meters would require you to go to
three #6 AWG copper wires.
230V / 50 Hz Electrical Installation
RCD and Wiring Requirements
Note: SINGLE PHASE ONLY!
Three phase power requires 400V.
Only use 230V.
Use this table to determine your
wiring conguration.

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
6
F3 10A 250V
F6 0.125A 250V
J101
J100
J42
J39
J54
J56
J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
J13
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
J109
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10 J43
K9
J109
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
12VAC-B 12VAC-A
J13
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
5.5 kW heater box
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
601 control system
One 16A RCD
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND) 2100 control system
One 32A RCD
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Two 16A RCDs
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 5.5 kW heater box)
GREEN / YELLOW (Ground)
601 control system
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)
Diagram 1

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
7
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
J13
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
J109
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10 J43
K9
J109
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
12VAC-B 12VAC-A
J13
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
5.5 kW heater box
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
601 control system
One 16A RCD
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND) 2100 control system
One 32A RCD
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Two 16A RCDs
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 5.5 kW heater box)
GREEN / YELLOW (Ground)
601 control system
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)
Diagram 2

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
8
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
J13
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
J109
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10 J43
K9
J109
F3 10A 250V
F6 0.125A 250V
J101
J100
J42
J39
J54
J56
J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
12VAC-B 12VAC-A
J13
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
5.5 kW heater box
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
601 control system
One 16A RCD
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND) 2100 control system
One 32A RCD
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Two 16A RCDs
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 5.5 kW heater box)
GREEN / YELLOW (Ground)
601 control system
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)
Diagram 3

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
9
Diagram 4
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
J13
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
J109
F3 0.125A SLO-BLOW
K5
K1
K2
K4
J33
J9
1
2
3
4
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J12 J88 J62
F6 30A
F8 30A
J56 J57 J55
J59
J51
J52 J98
J10
A/V CHAUD
PUMP 1
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10
K9
F3 0.125A SLO-BLOW
K5
K1
3
2
J39
J111
J11
J10 J43
K9
J109
F3 10A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J41 J53
J12
J38
J37 J48
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K1
3
3
2
2
(UNFUSED)
2
1
1
K12
J109
BLOWER
24090_B
J46
HEATER
12VAC-B 12VAC-A
J13
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
5.5 kW heater box
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
601 control system
One 16A RCD
Three wires:
1 brown (HOT)
1 blue (NEUTRAL)
1 yellow (GROUND) 2100 control system
One 32A RCD
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
Two 16A RCDs
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 5.5 kW heater box)
GREEN / YELLOW (Ground)
601 control system
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW
(Ground)
GREEN / YELLOW
(Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
10
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K2
K4
K8
LIGHT
GND
J33 J21 J32
J9
1
2
3
4
2
K6
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53
J58
J11
J41
J48
J6
J7
J49
J19
J50
J13
J12 J88 J62
F6 30A
F8 30A
J56 J57 J55
J59
J51
J52 J98
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
A/V CHAUD
PUMP 1
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
F3 10A 250V
F2 3A 250V
F6 0.125A 250V
J101
J100
J42
J39
J54
J56
J57
J40
J32
J51
J41 J53
J12
J38
J37 J48
J50
J56
J52
J19 J18
J35
J34 J36
J55
J43
J24 J14
F5 30A
K3
TB1
K5
K6
K2
K1
K4
OZONE
J47
A/V
J8 J21
PUMP 1
CIRC
3
3
2
2
(UNFUSED)
2
1
1
F4 3A 250V
K12
K7
J15
J33
J45
J109
J22
TEMP SENSORS
J16
J28 AUX FRZ
BLOWER
LIGHT
ON
24090_B
1
GND
J46
HEATER
120V 120V
240V
12VAC-B 12VAC-A
J44
J13
J20
P2/BLWR
J23
SERIAL J108
EXPANDER
J25=HTR1 J26=HTR2
J27=HTR3 J30=TEST
J31=CE HTR SEL
T1
HTR
DISBL
J29
VAC
F3 10A 250V
F2 3A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J51
J41 J53
J12
J38
J37 J48
J50
J52
J19 J18
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K6
K2
K1
K4
J8 J21
PUMP 1
CIRC
3
3
2
2
(UNFUSED)
2
1
1
F4 3A 250V
K12
K7
J15
J45
J109
J28 AUX FRZ
BLOWER
LIGHT
24090_B
GND
J46
HEATER
120V 120V
240V
12VAC-B 12VAC-A
J44
J13
J23
SERIAL J108
EXPANDER
T1
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K2
K4
K8
LIGHT
GND
J33 J21 J32
J9
1
2
3
4
2
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J48
J6
J7
J49
J19
J50
J13
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
A/V CHAUD
PUMP 1
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K8
LIGHT
GND
J21 J32
2
K6
3
2
J39
J111
J11
J48
J6
J7
J49
J19
J50
J13
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
With 3.0 kW heater only
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 601 control system)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
2100 control system
BROWN (Hot)
GREEN / YELLOW (Ground)
BLUE (Neutral)
601 control system
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
Nine wires:
3 brown (HOT)
3 blue (NEUTRAL)
3 yellow (GROUND)
One 32A RCD
(connect to 2100 control system)
Two16A RCDs
(connect to 601 control system
and 5.5 kW heater)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
With 3.0 kW heater and 5.5 kW heater
SPA SIDE
SWIM SIDE
SPA SIDE
SWIM SIDE
601 control system
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)
Diagram 5

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
11
Diagram 6
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K2
K4
K8
LIGHT
GND
J33 J21 J32
J9
1
2
3
4
2
K6
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53 J58
J11
J41
J48
J6
J7
J49
J19
J50
J13
J12 J88 J62
F6 30A
F8 30A
J56 J57
J55 J59
J51
J52 J98
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
A/V CHAUD
PUMP 1
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
F3 10A 250V
F2 3A 250V
F6 0.125A 250V
J101
J100
J42 J39
J54
J56 J57
J40
J32
J51
J41 J53
J12
J38
J37 J48
J50
J56
J52
J19 J18
J35
J34 J36
J55
J43
J24 J14
F5 30A
K3
TB1
K5
K6
K2
K1
K4
OZONE
J47
A/V
J8 J21
PUMP 1
CIRC
3
3
2
2
(UNFUSED)
2
1
1
F4 3A 250V
K12
K7
J15
J33
J45
J109
J22
TEMP SENSORS
J16
J28 AUX FRZ
BLOWER
LIGHT
ON
24090_B
1
GND
J46
HEATER
120V 120V
240V
12VAC-B 12VAC-A
J44
J13
J20
P2/BLWR
J23
SERIAL J108
EXPANDER
J25=HTR1 J26=HTR2
J27=HTR3 J30=TEST
J31=CE HTR SEL
T1
HTR
DISBL
J29
VAC
F3 10A 250V
F2 3A 250V
F6 0.125A 250V
J101
J100
J42
J39
J54
J56
J57
J40
J51
J41 J53
J12
J38
J37 J48
J50
J52
J19 J18
J35
J34 J36
J55
J43
F5 30A
K3
TB1
K5
K6
K2
K1
K4
J8 J21
PUMP 1
CIRC
3
3
2
2
(UNFUSED)
2
1
1
F4 3A 250V
K12
K7
J15
J45
J109
J28 AUX FRZ
BLOWER
LIGHT
24090_B
GND
J46
HEATER
120V 120V
240V
12VAC-B 12VAC-A
J44
J13
J23
SERIAL J108
EXPANDER
T1
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K2
K4
K8
LIGHT
GND
J33 J21 J32
J9
1
2
3
4
2
4
3
2
1
J45
J110
J79 J54
J72
J42
J3
J37
J4 J1
J61J47
J77 J75 J78
J36
J60
J46
J38
J39
J111
J53
J58
J11
J41
J48
J6
J7
J49
J19
J50
J13
J12 J88 J62
F6 30A
F8 30A
J56 J57 J55
J59
J51
J52 J98
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
A/V CHAUD
PUMP 1
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
F4 3A SLO-BLOW
J25 J31
J26 J30
115V 115V
230V
F3 0.125A SLO-BLOW
F7 10A 250VAC
F2 10A 250VAC
J44
3
J15
ON
10
S1
K5
K1
K3
T1
K8
LIGHT
GND
J21 J32
2
K6
3
2
J39
J111
J11
J48
J6
J7
J49
J19
J50
J13
J10
J81
J20
J18
J43
CIRC PUMP
OZONE
J14
K9
J5
AUX
J8
AUX
J40
REMOTE
J35
MAIN
J34
MAIN
J109
J27
J91
J22
J23
SERIAL
J29
VAC
J28
AUX
FRZ
J17 J16
24082_E
J101
J108
J24
J107
K12
K7
AUX**
With 3.0 kW heater only
Six wires:
2 brown (HOT)
2 blue (NEUTRAL)
2 yellow (GROUND)
One 32A RCD
(connect to 2100 control system)
One 16A RCD
(connect to 601 control system)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
2100 control system
BROWN (Hot)
GREEN / YELLOW (Ground)
BLUE (Neutral)
601 control system
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
Nine wires:
3 brown (HOT)
3 blue (NEUTRAL)
3 yellow (GROUND)
One 32A RCD
(connect to 2100 control system)
Two16A RCDs
(connect to 601 control system
and 5.5 kW heater)
GREEN / YELLOW
(Ground)
GREEN / YELLOW (Ground)
BLUE
(Neutral)
BROWN (Hot)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
BROWN
(Hot)
BROWN
(Hot)
BLUE
(Neutral)
BLUE
(Neutral)
BROWN
(Hot)
BLUE
(Neutral)
With 3.0 kW heater and 5.5 kW heater
SPA SIDE
SWIM SIDE
SPA SIDE
SWIM SIDE
601 control system
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
2100 control system
5.5 kW heater box
BROWN (Hot)
BLUE (Neutral)
BROWN (Hot)
BLUE (Neutral)
GREEN / YELLOW (Ground)
GREEN / YELLOW (Ground)

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
12
Filling and Powering Up Your Portable Spa
Inspect all plumbing connections in the
equipment area of your spa.
Never run the spa with the gate valves closed or
without water circulating for long periods of time.
1. Inspect the spa equipment.
2. Remove the cartridge from lter canister.
After you remove the lter, remove the plastic
wrapper and soak it in water for 30 minutes
before you replace it. A dry lter can allow air
into the ltration system which can cause the
pump to fail to prime.
If you have a skimmer like this:
Grip the lter by the handle and unscrew it from
the canister.
If you have a skimmer like this:
Remove the black skimmer cap and barrel, grip
the lter by the handle and unscrew it from the
canister.
If you have a skimmer like this:
Rotate and remove the black locking ring. Remove
the black skimmer cap and barrel, grip the lter
by the handle and unscrew it from the canister.
Replace and lock the locking ring and slide the
skimmer cap and barrel back in the canister.
Note: The skimmer cap and barrel were locked
in place at the factory to prevent damage during
shipment. It must be unlocked and replaced in
the lter canister so that it can oat when the spa
is lled. If you do not remove the cap and barrel,
your spa’s ltration system will not perform as it was
designed to.
Teleweir Mega
lter skimmer
• 75 square
feet ltration
• Smooth cap
Teleweir lter
skimmer
• 50 square feet
ltration
• Spoked cap
• Make sure unions in the equipment pack are tight. (Be
careful not to over-tighten the plumbing ttings.)
• If your spa has
gate valves, make
sure they are all
in the UP or OPEN
position.
• Make sure the drain
valve is closed and
capped. (See page
42 for a description
of drain valves.)

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
13
4. Turn on power to the spa.
When the spa is lled to the correct level, turn on the
power at the GFCI breaker. (Ensure that the 120V spas are
connected to the proper electrical outlet.)
3. Fill the spa.
Fill the spa until water level is about six inches from the top.
If the water level is too low or too high, your spa will not operate properly.
Never ll your spa with soft water.
Soft water makes it impossible to maintain the proper water chemistry and may cause the water to
foam, which will ultimately harm the nish of the spa and void your warranty.
Place a garden hose in the lter canister and ll your
spa.
Always ll the spa through the lter canister.
Failure to do so may cause air to be trapped in the
ltration system and prevent the pumps from operating
properly.

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
14
5. Prime the pump.
6. Install the lter into the lter canister.
Make sure the lter has soaked at least 30
minutes before you install it.
Your spa will perform a self-diagnostic check and go into
Priming Mode. The control panel will display either RUN
PUMPS PURG AIR --- or Priming Mode, depending on
which control panel you have.
Do the following:
Press the JETS or JETS 1 button once to start the pump in
low speed.
a. Press it again to switch the pump to high speed.
b. If you have other pumps, press JETS 2 or JETS 3
to turn them on also. Running the pumps helps the
pumps prime.
Test and adjust the water chemistry. See the section
on page 40. for instructions on keeping your water
clear.
Spa owners with the bromine generator need to
follow the instructions on page 38.
After two minutes, the pump should prime. If it does not, follow the priming instructions on the next page. If it
does, continue with the next step.
7. Adjust water chemistry.
8. Let the spa heat up.
When the spa has nished priming, the heater will
activate. Put the cover on and let the spa heat to the
set temperature.

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
15
New spa owners often have difculty the rst time they
start their spa and the pump fails to prime. This can be
frustrating, but these simple instructions can help you.
Sometimes air can become trapped in the pump while
lling the spa. You will know this has happened when after you have lled and started the spa, the pump does
not seem to function. You will hear the pump operating, but no water will be moving.
The pump will not work properly while
air is trapped in it. Continuing to operate
the pump in this way will cause damage.
After the initial start-up
sequence, the spa will enter
Priming Mode, which lasts 4
to 5 minutes. Depending on
your control panel, one of the messages shown at right will
appear.
As soon as the Priming Mode screen appears on the panel,
press the Jets or Jets 1 button once to start Pump 1 in low
speed and then again to switch to high speed. Also, select
the other pumps, to turn them on. The pumps should be
running in high speed to facilitate priming.
If the pumps have not primed after two minutes, and water
is not owing from the jets in the spa, do not allow the
pumps to continue to run. Turn off the pumps and repeat
the process. Note: Turning the power off and back on again
will initiate a new pump priming session.
Sometimes momentarily turning the pump off and on will
help it to prime. Do not do this more than ve times. If the pumps will not prime, shut off the power to the
spa and call for service.
Important: A pump should not be allowed to run without priming for more than two minutes. Under NO
circumstances should a pump be allowed to run without priming beyond the end of the 4 to 5 minute priming
mode. Doing so may cause damage to the pump and cause the system to energize the heater and go into
an overheat condition.
Exit Jets 1 Jets 2 Jets 3 Circ
Priming Mode
Starting Up: Priming Mode
Exiting Priming Mode
You can manually exit Priming Mode by pressing an Up or Down button. Note that if you do not manually
exit the priming mode as described above, the priming mode will be automatically terminated after 4 to 5
minutes. Be sure that the pumps have been primed by this time.
Once the system has exited Priming Mode, the top-side panel will momentarily display the set temperature
but the display will not show the temperature yet. This is because the system requires approximately one
minute of water owing through the heater to determine the water temperature and display it.
Priming the Pump

2017 Portable Spa
LTR20171001, Rev. B
Preparing forYour New Portable Spa
www.calspas.com
16
If you have tried priming the pump several
times unsuccessfully using the control panel,
you can bleed the air from the pump manually.
1. Shut off the power to the spa.
2. Using a Phillips screwdriver, remove the
front panel from the spa and locate the
pump.
3. Close the gate valve on the discharge side
of the pump (if your spa is installed with
one.)
4. Turn the bleeder valve counter clockwise
with a small pair of pliers until the air has
been released from the pump.
5. If this is unsuccessful, loosen the union nut
on side of the pump with channel locks.
When air is bled out, tighten the nut.
6. Turn on power to the spa and press the
JETS button. If there is still air trapped in
the pump, repeat steps 2 through 5 until
the pump primes.
Bleeding Air from the Pump

2017 Portable Spa
LTR20171001, Rev. B
OperatingYour Spa
www.calspas.com
17
Operating Your Spa
TEMP JETS AUX
SET RANGE
SET
SET RANGE
READY RANGE FLTR1
SET
1
READY
SET
2
Adjust the set
temperature
Set temperature
ranges
Select heat mode
Set time of day
Flip (invert display)
Lock the display
(restrict operation)
Hold mode (standby)
Adjust ltration cycle 1
Adjust ltration cycle 2
Set personal
preferences
System utilities
(for diagnostics only)
Main screen
Press
2X
3X
4X
5X
6X
7X
8X
9X
10X
1X
1X
To go through all menus:
(1) Press the
Temperature button
12
(2) Then press the
Light button.
Each time you
press the Light
button, it will
take you to the
next menu item.
TP400 Control Panels
For one pump systems
For two pump systems
TP600 Control Panel
TP400 and TP600 Control Panel Operation
Warm Cool Light Jets Aux
Primary Navigation and Functions
Navigating and programming the entire menu
structure is done with 2 or 3 buttons on the control
panel.
During normal operation, the control panel will show
the actual temperature of the water, as the control
panels above show.
There are eleven settings, or menu items, you can
access in the control panel. To access them in order,
start by pressing the Warm or Cool button once.
The Set Temperature will start to ash.
While the set temperature is still ashing, press the
Light button. This will take you to the next menu
item. Each time you press the Light button, it will
take you to the next screen.
The gures below show the order the menu items
appear. Tap each menu item to go to the section that
explains its function.

2017 Portable Spa
LTR20171001, Rev. B
OperatingYour Spa
www.calspas.com
18
What is the difference between a 24-hour
circulation pump and a two-speed pump?
Circulation Pump - A 24-hour circulation pump
is an optional, dedicated low power pump just
for ltration. A circulation pump will reduce wear
and tear on main pump and can cost less to run
than using pump 1 for ltration. When a spa has
a circulation pump, pump 1 will have only one
speed.
Although it can be set to run continuously, some
spa owners prefer to reduce their ltration times
in order to lower their energy cost. See “Adjusting
Filtration” on page 22.
Two-Speed Pump - Spas without a circulation
pump use the low speed setting of pump 1 as a
circulation pump. Pump 1 will have two speeds,
low speed and high speed. Low speed is used for
ltration, and high speed is used for operating
the jets.
Jets and Pumps
Warm Cool Light Jets Aux
Warm Cool Light Jets Aux
Warm Cool Light Jets Aux
Warm Cool Light Jets Aux
Warm Cool Light Jets Aux
Warm Cool Light Jets Aux
Jet Operation
One Pump Systems
Uses the TP400 control panel
Single pump systems are all two-speed pumps.
To operate the jets, press the JETS button:
• Once to turn on low speed.
• Twice to turn on high speed.
• Three times to turn off the pump.
Two pump systems
Uses either the TP400 or TP600 control
panel
Press the Jets or Jets 1 button:
• Once to turn on low speed.
• Twice to turn on high speed.
• Three times to turn off the pump.
Press the Aux or Jets 2 button:
• Once to turn the pump ON.
• Twice to turn the pump OFF.
Three pump systems
Uses the TP600 control panel
Press the Jets 1 button:
• Once to turn on low speed.
• Twice to turn on high speed.
• Three times to turn off the pump.
Press the Jets 2 button:
• Once to turn the pump ON.
• Twice to turn the pump OFF.
Press Jets 3 button:
• Once to turn the pump ON
• Twice to turn pump OFF.