▪If the camera is on, but there is no microSD card inserted, the indicator light will flash red and blue for 4
seconds and then the camera will automatically turn off.
▪If the battery is low, the indicator light will flash red and blue for 3 seconds and then the camera will
automatically switch to protected mode, saving the recorded files to the microSD card.
HOW TO TAKE PHOTOS
1. With the camera turned on, press one time on the On/Off button (1) at the top of the pen. The camera
will switch into the standby mode.
2. Press two times on the On/Off button (1) at the top of the pen. The blue indicator light will flash once and
a photo will be taken.
Notice:
▪To switch the camera back to its recording mode, press one time on the On/Off button (1) at the top of
the pen. The blue indicator light will flash two times and then turn off.
HOW TO TURN OFF THE CAMERA
Press and hold the On/Off button (1) at the top of the pen, until the blue indicator light flashes once and the
camera turns off.
HOW TO RESET THE CAMERA
If for some reason there is a crash, the recording function does not work or the device does not work at all,
use the provided pin and press once on the reset button (4). After a reset, the device should work normally.
HOW TO ADD RECORDING TIMES FOR VIDEO AND PICTURE FILES
1. Insert the micro SD card into your computer
2. Open the time.txt file on the micro SD card
3. Change the letter “N” to “Y” and save the file (e.g. 2018/08/08 00:00:00 N→ 2018/08/08 00:00:00 Y)
III. SAFETY AND PRECAUTIONS