Campania International Barcelona User manual

F
T
-
37
Barcelona
Fountain
Two peopleare recommendedfortheinstallationofthis fountain!
R
evised
December 15, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#7 stopper(1)
Approx.10”length of1/2”BlackNon-kinktubing(1)**
2”length of5/8”cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Wedges(2)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

F
T
-
37
Barcelona
Fountain
Two peopleare recommendedfortheinstallationofthis fountain!
R
evised
December 15, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof323poundswith
anapproximate2square foot footprint.
FT-37C(24 lbs)
16”Lx16”Wx3”H
FT-37B (166lbs)
17.5”Lx17.5”Wx12”H
FT-37A(90 lbs)
10”Lx10”Wx16”H
1. Place thebase(FT-37C) intoposition wherethefountain
will beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. NOTE: All pumpscomewith 1adapteralready
inserted intothe pumpand 2adapterssecured to
the power cord.
i. This fountainusesthe largestadapter
provided.
b. Using ahoseclamp, attachthe1/2”non-kink tubing
to thepumpoutlet.
c. Place thestopper aroundthepumpcord
approximately8”fromthepump.
3. Feedthepumpcordthrough theholeinthebasin(FT-37B)
andthechannelinthebase(FT-37C).
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Center and levelthebasin(FT-37B) over thebase(FT-
37C).
6. Place theother endofthe1/2”non-kinktubingontothe
copperpipeprotrudingfromthebottomofthewater
feature (FT-37A)and tightenthehoseclamp.
7. Carefullylower thewater feature (FT-37A)into thebasin.
8. Fillthefountainwithwater.