Campania International Mini Element with Zen Frog Fountain FT-253 User manual

FT
-
253 MiniElementwithZenFrog Fountain
R
evised
February8, 2019
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent
that fillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater, which
thenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsorinadryprotectedplace such
asacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, stoppers, drainpipes, finials, andother small componentsfor storageindoors. Note that stoppersor drain
pipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK120-LVpump with transformer(1)
Approx.6”length of1/2”blacknon-kinktubing (1)
Aluminumspiller/insert (1)
Hose clamps(3)*
Adhesive Dots(4)
*Hoseclamps maybe used asflow restrictors
FOUNTAININFORMATION:
Thisfountain holdsapproximately1/2gallonof water.
Norecommended fountain coversare available forthis
fountain.
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PK120-LV- 120 GPH LowVoltagePump
6FTcord length

FT
-
253 MiniElementwithZenFrog Fountain
R
evised
February8, 2019
Assemble your fountain on a level surface capable ofholding a minimum of30 pounds with an
approximate1/2 squarefoot footprint.
FT-252C(17lbs)
11.5”Lx6”Wx6”H
FT-252B(2lbs)
4.5”Lx3.75”Wx4”H
FT-253A(4lbs)
4”Lx6”Wx4.25”H
1. Place theadhesivedots on thebottomofthebasinto
protectfurnituresurface thatfountainisto beplacedon.
2. Position thebasin (FT-252C) where thefountain is to be
installed, ensuringthatitislevel.
3. Using ahoseclamp, secure oneend ofthe1/2”non-
kinktubing to thepump.
4. Place thepumpintothebasin (FT-252C) sothatthe
cordcomesupandout thebackofthefountain.
5. Using ahoseclamp, place theother endofthetubing
ontothepipeprotruding fromthebottom/insideofthe
pumpcover (FT-252B).
6. Place thepumpcover(FT-252B) intothebackofthe
basin(FT-252C) sothatthepipeprotrudingupfromthe
pumpcover isfacing up andthepumpis hidden.
7. Place theholeofthealuminumspiller/insertontothe
pipesticking upout ofthepumpcover so thatthelip is
spillinginto thebasin ofthefountain.
8. Place thebirds (FT-253A)over thespiller insert.
9. Attachedthepumpcordtothetransformer.
10.Fillthefountainwithwater.