Campania International FT-216 User manual

F
T
-
21
6Andra
Fountain
R
evised
June13, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
PumpKitParts List
PK140 pump
#7 stopper(1)
Approx.6”length of1/2”blacknon-kinktubing (1)**
Approx.2”length of5/8”cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled.
FOUNTAININFORMATION:
Thisfountain holdsapproximately1gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

F
T
-
21
6Andra
Fountain
R
evised
June13, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof100poundswith
anapproximate1/3 square footfootprint.
FT-216B(78 lbs)
19.5”Lx19.5”Wx20.25”H
FT-194A(10 lbs)
12.25”Lx12.25”Wx2.25”H
1. Position thebasin (FT-216B) where thefountain is
to beinstalled, ensuring thatit is level.
2. Assemblethepumpkit
a. NOTE: All pumpscomewith 1adapter
alreadyinserted intothe pumpand 2
adapterssecured tothe power cord.
i. This fountainusesthe largestadapter
provided.
b. Using ahoseclamp, attachthe1/2"non-kink
tubingtothepumpoutlet.
c. Place thestopper aroundthepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough theholeinthebasin
(FT-216B) andoutofthechannel.
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriveror
hammer works best topressthestopper in
place.
5. Coilthepumpcordinthepumphouse.
6. InserttheCPVCendofthetubingassembly into
thecouplingatthebottomofthewater feature (FT-
194A).
7. Place thewater feature(FT-194A)into thebasin
(FT-216B) ensuring thatit is level.
a. Turnthefeatureandcoilthetubingasyou
lower it intoposition.
8. Fillthefountainwithwater.