Campania International CAST STONE FT-118 User manual

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
C A S T S TO N E C O L LE C T I O N
MODERNE FOUNTAIN

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
Campania employs a talented group of artists who create original copyrighted designs that blend old world traditions with a
uniquely American sensibility. They are designed by hand, molded by hand, poured by hand, stained by hand, and packaged by
hand.
Campania’s cast stone pieces are manufactured with a high density cast stone mix, resulting in a PSI (pounds per square inch)
strength of approximately 7,500. The natural materials used in our mix are sourced locally. Our cast stone products can qualify for
LEED MR 5.1 and /or MR 5.2 credits as applicable to your project.
All of our cast stone products are available in 11 exclusive patinas in addition to natural cast stone. We hand apply each patina
in a multi-step process. Our patinas are designed to replicate the look of naturally aged materials and will not prevent the natural
aging process. Any cast stone item with a patina will weather naturally in an outdoor environment.
Our full collection of cast stone pieces include: planters, urns, pedestals, large estate fountains, wall fountains, garden foun-
tains, tables, benches, garden statues, Asian accents, finials, birdbaths and other accents.
 Hand-made in the USA by Campania
 High density 7,500 PSI cast stone
 Natural materials locally sourced
 Can qualify for LEED MR 5.1 and MR 5.2 credits
 Strong and durable for outdoor use
 Ages naturally over time
 Available in 11 exclusive patinas and natural (no patina applied)
 Many Sizes and Design Options: Traditional, Classic, Contemporary, Modern, and Transitional Styles
 Estate size fountain and basin systems, wall fountains, garden fountains
 Auto-refill devices, lights, and fountain covers available through Campania
 Pump Kits included
 All recommended commercial products and CAD files can be viewed at
www.campaniainternational.com/projects
 Full line can be viewed online at www.campaniainternational.com
C A M PA N I A CAST STONE FOUNTAINS
C A S T S TO N E C O L LE C T I O N
CAST STONE FOUNTAIN GENERAL CARE
Always place any Campania product on a solid level surface and not directly on grass, soil, or an uneven surface.
Proper winter care is recommended for all Campania cast stone fountains for protection in environments with potential freeze-thaw cycles.
 Drain Fountains and make sure that the basins are completely dry.
 If possible, remove pump, rubber stoppers, drainpipes, finials, and other small components for storage indoors. Note that stoppers or
drainpipes are removed to allow drainage in the event water accumulates in any basin. Compression stoppers may be left on the pump cord
for easier assembly next season.
If this is not possible
 Cover fountain with an appropriately sized fountain cover, available from Campania, making sure that water will not accumulate in the basin
or other fountain components and freeze.
 Check fountain periodically to insure that cover is secure and water is not accumulating in any fountain component.

Revised July 9, 2015
COMPONENTS AND PARTS LIST
Fountain Basin
FT-118B (formerly FT-118B & FT-118C)
22.75”l x 22”w x 47”h
632 lbs
Ftn Disc for Basin
FT-118D
16.25”l x 12.25”w x 1.25”h
18 lbs
Pump Kit Parts List
PK500 pump (1)
LED-LIGHT (1)
LED-CORD (1)
LED-TRANS (1)
#10 rubber stopper with large hole (1)
Plumber’s putty (1)
Approx. 12” length of ½” non-kink black tubing (1)
Approx. 4” length of 5/8” i.d. clear tubing (1)
Hose clamps (3) Note –Hose clamps can be used as flow restrictor
Wedges (2)
2.8 oz tube of silicone (1)
Copper Spiller (1)
FT-118 Moderne Fountain
(4 pieces)
Fountain Top
FT-118A
21”l x 6.25”w x 14.25”h
121 lbs
Spiller Stop
FT-118E
12”l x 1.25”w x 2”h
2 lbs
Tools you will need
Level
This fountain uses cover
FTNCOV-MED
NOTE: Component photos are not to scale
Fountain holds approximately 10
gallons of water

Revised July 9, 2015
ASSEMBLY INSTRUCTIONS
1. Make sure you are assembling your fountain on a level surface capable of holding a
minimum of 832 pounds with approximately a 3 square foot footprint.
2. Pump and hose assembly must be done before placing fountain against the wall.
3. Feed the pump and light cords through the hole in the basin leaving enough cord
length inside basin to work with pump and light. Light will rest on top of disk
inside basin.
4. Wrap a piece of putty around the cords where you will be placing the stopper. (Fig A)
5. Fit cords into stopper
6. Place a piece of putty inside the length of the slit in the stopper
7. Wrap putty around outside of stopper ensuring that the slit and the cord hole are
covered and sealed (Fig B)
8. Press stopper firmly into the hole of basin
9. Place a hose clamp over each end of the length of ⅝” non-kink black tubing
10. Connect one end to the pump water outlet and one end to the copper pipe extended into the inside of
the basin
11. Clean outside surface of the copper plate provided with a clean, dry towel.
12. Apply silicone generously on the outside of the plate as shown below.
13. Place plate over spiller so that it is positioned exactly on top and position it with a downward movement as
shown on picture.
a. The small lip on the bottom of the spiller will rest behind the back of the spiller.
14. Let it dry a minimum of 4 hours, 24 hours is preferable.
15. The copper spiller will protrude over the top of the sides of the concrete spiller.
16. Place the spiller stop (FT-118E) into the spiller area.
17. Turn on water fountain to test for leaks before placing top piece.
18. If there are leaks between the concrete and the copper go back to step 11.
19. Using the tube of silicone provided, run a bead of silicone along the top of the basin where the top piece will be
placed. Take care not to use too much silicone to minimize oozing of silicone from between the pieces.
Silicone
Lip of Spiller
Silicone
FT-118 Moderne Fountain
(4 pieces)
Fig A
Fig B

Revised July 9, 2015
ASSEMBLY INSTRUCTIONS
20. Clean off any excess silicone with your finger or a dry rag as quickly as possible.
21. Carefully place the FT-118A onto the FT-118B.
a. Note –silicone should be allowed to dry according to manufacturer’s recommendations prior to
fountain operation
22. Place the disc (FT-118D) into the basin (FT-118B)
23. Place the LED light onto the disc facing the light at the waterfall.
24. Once silicone is dry, fill basin with approximately 10 gallons of water.
Note –do not allow pump to run dry as it will cause damage to the pump.
WINTER CARE AND GENERAL FOUNTAIN INSTRUCTIONS
-W I N T E R C A R E -
Fountain bowls/tops and other fountain components, which collect water, should not be left outside in the winter since
any component, which fills with water and freezes may crack. Likewise components such as pedestals, which remain
in a basin, filled with water, which then freezes, may also crack or crumble. Ideally, therefore, a fountain should always
be stored indoors or in a dry protected place such as a covered porch away from the elements. However, if a fountain
must be left outside:
(1) Remove pump, rubber stoppers, drainpipes, finials, and other small components for storage indoors. Note
that stoppers or drainpipes are removed to allow drainage in the event water accumulates in any basin. Compression
stoppers may be left on the pump cord for easier assembly next season.
(2) Raise fountain base from ground with wood strips so that base will not freeze to the ground surface.
(3) Cover or wrap the fountain with burlap or other absorbent material (old blanket or towel) and then cover
securely with plastic, making sure that water will not accumulate in the basin or other fountain component and freeze;
(4) Check fountain periodically to insure that plastic is secure and water is not accumulating in any fountain
component.
-G E N E R A L F O U N T A I N T I P S -
Install fountains on a level surface. You will need a properly grounded 110-volt (AC only) GFCI protected receptacle
near the fountain for your pump. All pumps are submersible and must be completely underwater to function properly.
Test all pumps and adjust to full output prior to assembly. It is not recommended that fountains be placed directly on
grass or dirt. Position the channel opening at the base of each fountain toward the electrical outlet to be used since the
pump cord will be threaded through this opening.
For more Campania product information visit www.campaniainternational.com
FT-118 Moderne Fountain
(4 pieces)
All of our cast stone is proudly

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
Campania’s cast stone products are available in a choice of three exclusive (3) acid stains and eight (8) exclusive natural
pigment stains in addition to natural cast stone. All of our patinas and acid stains are hand applied in a multi-step process,
producing uniquely beautiful original pieces. Designed to replicate the look of naturally aged materials, the patinas will not
prevent the natural aging process that occurs in an outdoor environment.
Campania’s acid stains (a mixture of water, metallic salts, and muriatic acid) penetrate the surface and react chemically
with elements in the cast stone, producing a rich saturated stain that resists flaking or peeling.
Like stains for wood, each piece will accept our patinas in varying degrees of intensity, creating natural variations that
add character and distinction to every piece. Even when applied with the same process, no two pieces will look exactly alike
due to the composition of the cast stone, and the varying age of the pieces. Rather than creating uniform stains, our
approach gives our products their unique beauty and appeal.
C A M PA N I A P a t i n a s
Alpine Stone (AS) Greystone (GS) Verde (VE) Copper Bronze (CB)
English Moss (EM) Aged Limestone (AL) Brownstone (BR) Travertine (TR)
Pietra Vecchia (PV)* Ferro Rustico (FR)* Terra Nera (TN)* Natural (NA)
* Denotes Acid Stain
Due to the hand-application process and photography, actual colors may vary slightly from those depicted in these examples. Please consult our
catalog photos and our website for examples of variations of our patinas.

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
FOUNTAIN REFILL DEVICE
By CAMPANIA
Specifications
Item # | Item Description | Dimensions (L x W x H) |Base Dimensions (L x W) | Weight (lbs)
REFILL #10 Fountain Refill Device with Stopper 6 x 3 x 5 6 x 3 3
REFILL #7 Fountain Refill Device with Stopper 6 x 3 x 5 6 x 3 3

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
FOUNTAIN COVERS
Specifications
Item # | Item Description | Dimensions (Diameter x H) | Weight (lbs) | Fits Fountains Up To H or D x H
FTNCOV-SM Fountain Cover Small 28 x 13 2 20
FTNCOV-MED Fountain Cover Medium 64 x 27 3 40
FTNCOV-LG Fountain Cover Large 70 x 34 4 35 x 65
FTNCOV-XLG Fountain Cover Extra Large 84 x 36 4.5 55 x 65