Campania International Aurelia FT-283 User manual

FT
-
283 AureliaFountain
Two people are recommended for the installation ofthisfountain!
R
evised
May9, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
Approx.12”length of1/2”BlackNon-kinktubing(1)**
2”Length 5/8”Cleartubing (1)**
Wedges(3)
Hose clamps(3)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible with#10 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

FT
-
283 AureliaFountain
Two people are recommended for the installation ofthisfountain!
R
evised
May9, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof315poundswith
anapproximate1square foot footprint.
FT-282E(96lbs)
16”Lx16”Wx12”H
FT-282D(151lbs)
29.5”Wx17”H
FT-283A(11lbs)
8.5”Wx9”H
1. Place thebase(FT-282E) intopositionwherethe
fountainwill beinstalled, ensuring that it islevel.
2. Center thelargebowl (FT-282D) on thebase(FT-
282E)
3. Assemble thepumpkit
a. Using ahoseclamp, attachthe12”piece of
1/2”non-kinktubing tothepumpoutlet.
b. Place ahoseclampover the5/8”clearend of
thetubing.
c. Place thestopper around thepumpcord
approximately6”fromthepump.
4. Feedthepumpcordthrough thehole inthelarge
bowl (FT-282D)and throughthebase(FT-282E).
5. FIRMLY press thestopper intothehole evenly.
a. Note: Using thehandle ofascrewdriver or
hammerworksbesttopress thestopper in
place.
6. Fit the5/8”clear tubing ontothecopper pipe
protruding fromtheinsidebottomofthefinial (FT-
283A).
7. Carefullylowerthefinial (FT-283A) intothelarge
bowl.
a. Turnthefeaturetocoil thetubing asyou
lower it intoposition.
8. Fill thefountainwithwater.