Campania International FT-118 User manual

FT
-
118
Moderne
Fountain
Two peoplearerecommended for theinstallationofthis fountain!
R
evised
August15, 2019
PumpKitParts List
PK500 Pump (1)
LED-Light (1)***
LED-Cord (1)***
LED1Transformer(1)***
#10 stopper(1)
Approx.12”length of1/2”non-kinkblacktubing (1)**
Approx.4”length of5/8”i.d. cleartubing (1)**
2.8 oztubeofsilicone (1)
FT-118SPL CopperSpiller(1)
Hose clamps(1)
Wedges(2)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
***DonotpreassembletheLEDLightandTransformer
PRODUCTINFORMATION
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecure, andwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater to
functionproperly. Testall pumpsandadjusttofull outputprior toassembly. Itisnot
recommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately10 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-LG)
Compatible with#10 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
Flat HeadScrewdriver
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

FT
-
118
Moderne
Fountain
Two peoplearerecommended for theinstallationofthis fountain!
R
evised
August15, 2019
ASSEMBLYINSTRUCTIONS
Assembleyourfountainon alevelsurface capableofholdingaminimumof832 pounds with an approximate3
square footfootprint.
FT-118B (632lbs)
23”Lx21.5”Wx47”H
FT-118D(18lbs)
16.25”Lx11”Wx1.25”H
CopperSpiller
FT-118SPL
FT-118E(2lbs)
10.75”Lx1”Wx1.25”H
FT-118A(121lbs)
21”Lx6.25”Wx14.25”H
1. Position thebasin (FT-118B)where thefountain is to beinstalled, ensuring
thatit will belevel.
2. Assemblethepump kit and stopper
a. NOTE:Besure to usetheappropriate size adapter providedwith
thepumpand do notplug theLED-LightorLED-Cordinto the
transformer until assembly is complete.
b. Usingahoseclamp, attach theend ofthe1/2"non-kink tubing
withouttheclear tubingto thepump outlet.
c. Spread asmall amountofsilicone THINLY around theLEDlight
cord approx. 24”fromthelight.
d. Do thesamearound thepump cord about12”fromthepump.
e. Press thetwo cords together.
f. Place the#10 stopper around both cords.
3. Feed bothcords throughthelargeholein thefountain basin (FT-118B)and
through thechannel, which is located in theback-rightcorner ofthebase.
4. FIRMLY and evenlypress thestopper into theholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer works bestto
press thestopper in place.
5. Connectthe5/8”clear vinyltubingto theCPVCpipeprotrudinginsidethe
bottom-back wall ofthebasin (FT-118B).
6. Spread athin bead ofsiliconearound theperimeterofthestopper.
7. Place thefountain disc(FT-118D) into thebasin.
8. Pull theLEDLightthrough theholein thefountain disc(FT-118D) so it can
reston top.
a. Becarefulnotto pull thestopper loose.
9. Usethesiliconeprovidedto install thecopper spiller. (Imagebelow)
a. Besurethespiller is clean and drybefore installing
10. Insertthespiller stop (FT-118E)into theslotbehind thecopper spiller.
a. Besurethatthe2 PVCpipes protrudingupwardarecovered bythe
spiller stop (FT-118E).
11. Run athin bead ofsiliconearound thetop ofthebasin (FT-118B)wherethe
fountain top (FT-118A) will beplaced.
12. Carefullyplacethefountain top (FT-118A) onto thebasin (FT-118B).
a. Besureto cleanawayanyexcess silicone.
13. ConnecttheLEDLightto theLED-Cord then theLEDTransformer.
14. Letthefountain sit 24 hours beforefillingit with water.