Campania International Condotti FT-280 User manual

FT
-
280
Condotti Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
July19, 2018
PumpKitParts List
PK800 Pump (1)
#10 stopper(1)
#7 DrainStopper
Approx.12”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”cleartubing (2)**
2”length of3/4"cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Wedges(2)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
**Tubing hasbeen pre-assembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately25 gallonsof water.
Thisfountain usesanextra-largefountain cover.
(FTNCOV-XLG)
Compatible with#10 Refill Deviseand LEDkit.
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPP800 - 800GPH Pump
16 FTcord length

FT
-
280
Condotti Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
July19, 2018
Assemble yourfountainon alevel surface capable ofholdingaminimumof1200pounds withanapproximate 4squarefootfootprint.
FT-269H(392lbs)
24”Lx24”Wx15”H
P-713(500lbs)
46”Wx25.25”H
FT-224D(56lbs)
12”Wx8”H
FT-280A(10lbs)
12”Wx5”H
FT-224E(2lbs)
6”Lx2.5”Wx4.75”H
FT-269I(13 lbs)
8.25”Lx2.5”Wx9”H
1. Place thebase(FT-269H) intopositionwherethefountain
will beinstalled,ensuring that it islevel.
2. Assemble thepumpkit
a. Connect thepreassembledtubing tothepumpby
sliding the3/4" clear tubing over thepumpoutlet.
b. Place thestopper around thepumpcordabout8”
fromthepump.
3. Center theurn(P-713) over thebase(FT-269H).
4. Feedthepumpcordthrough thehole intheurn(P-713)
and thechannel inthebase(FT-269H).
5. FIRMLY press thestopper intothehole evenly.
6. Insertthesmallerdrainstopper intothesmall hole ofthe
bowl.
7. Place thepumphouse(FT-224D) over thepumpand in
thecenter oftheurn(P-713).
8. Position thewaterfeaturedisc(FT-280A) over thepump
house(FT-224D).
9. Insertthe1/2" CPVCend ofthepreassembledtubing into
thecoupling protruding fromthebottomofthewater
featuredisc(FT-280A).
10.Fit thesmall pumphousedoor (FT-224E) intothepump
house(FT-224D).
11.Fit thelargeaccessdoor (FT-269I) intothebase(FT-
269H).
12.Fill thefountainwithwater.