Campania International FT-136 User manual

F
T
-
13
6
B
irdsElement
Fountain
Revised
April 10, 2017
Pump KitPartsList
PK140 Pump (1)
Approx.10”length of1/2”BlackNon-Kinktubing (1)**
Approx.2”length of5/8”cleartubing **
Hose clamps(2)*
Approx.9”length ofrebar(2)
*Hoseclampsmaybe used as flow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately1.5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Notrecommended for use with refillkits or LED
lightkits.
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

F
T
-
13
6
B
irdsElement
Fountain
Revised
April 10, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof153poundswith
anapproximate1.25 square foot footprint.
FT-135C (66lbs)
18”Lx10”Wx8”H
FT-136A(69lbs)
5”Lx10”Wx22.75”H
FT-135B (6lbs)
6.5”Lx6.75”Wx4”H
1. Position thebasin (FT-135C) where thefountain is to be
installed, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2"non-kink tubing
to thepumpoutlet.
3. Place thepumpin thebasin(FT-135C) nexttothegapon
thetop lip.
4. Laythepumpcordin thelipatthetopofthebasin (FT-
135C).
5. Insertthe2rebar supportpipesintotheholesatthebackof
thebasin
6. Place thewater feature(FT-136A)overtherebar support
pipes.
a. Checkthatthewater feature (FT-136A)andbasin
(FT-135C) restflush.
b. Checkthatthepumpchordis not beingcrushed.
7. Fit the5/8”clear tubing over theCPVCpipeprotruding
fromthebottomofthewater feature (FT-136A).
8. Place thepumpcover(FT-135B) in front ofthepump
assemblyand pushbackuntilproperlyseated.
a. Cover shouldbeplacedwith thefinger holeto the
bottom.
b. Note:If coverisnot installedproperly, it will not fit
in thebasin.
9. Fillthefountainwithwater.