Campania International FT-118 User manual

FT
-
118
Moderne
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
March31, 2017
PumpKitParts List
PK500 Pump (1)
LEDLight (1)
LED Transformer(1)
#10 stopper(1)
Approx.12”length of1/2”non-kinkblacktubing (1)**
Approx.4”length of5/8”i.d. cleartubing (1)**
2.8 oztubeofsilicone (1)
CopperSpiller(1)
Hose clamps(3)
Wedges(2)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
***DonotpreassembletheLEDLightandTransformer
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately10 gallonofwater.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
WP2000 -525GPH Pump
15 FTcord length

FT
-
118
Moderne
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
March31, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof832 poundswithanapproximate 3squarefootfootprint.
FT-118B (632lbs)
FT-118D(18lbs)
CopperSpiller
FT-118E(2lbs)
FT-118A(121lbs)
1. Assemblethepumpkit and stopper
a. Usingahose clamp, attachtheendofthe1/2"non-kinktubingwithoutthecleartubingtothe
pumpoutlet.
b. Spreadasmall amountofsilicone THINLY aroundtheLEDlightcordapprox.24”fromthe
light.
c. Dothesamearound thepumpcordabout12”fromthepump.
d. Press thetwocordstogether.
e. Place the#10stopperaroundbothcords.
2. Feedbothcordsthroughthelargeholeinthefountainbasin(FT-118B) andthrough thechannel, which
islocatedinthebackrightcornerofthebase.
3. FIRMLY press thestopperintotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammerworksbesttopress thestopperinplace.
4. Connectthe5/8”clearvinyltubing tothePVCpipeinthebottomofthebasin(FT-118B).
5. Spreadathinbeadofputtyaroundtheperimeterofthestopper.
6. Place thefountaindisc (FT-118D)intothebasin.
7. Pull theLEDLightthroughtheholeinthefountaindisc (FT-118D)soit canrestontop.
a. Becarefulnottopullthestopperloose.
8. Use thesiliconeprovidedtoinstallthecopperspiller. (Imagebelow)
a. Besurethespilleriscleananddrybeforeinstalling
9. Insert thespillerstop(FT-118E)intotheslotbehindthecopperspiller.
a. Besurethatthe2PVCpipes protrudingupwardarecoveredbythespillerstop(FT-118E).
10. Run athinbeadofsiliconearoundthetopofthebasin(FT-118B) wherethefountaintop (FT-118A)
will beplaced.
11. Carefullyplace thefountaintop (FT-118A)ontothebasin(FT-118B).
a. Besuretocleanawayanyexcesssilicone.
12. ConnecttheLEDLighttotheLEDTransformer.
13. Letthefountainsit24hoursbeforefillingit withwater.