Campania International FT-302 User manual

F
T
-
302
Echo ParkFountain
Two people are recommended for the installation ofthisfountain!
Revised
June29, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK300 pump (1)
#10 stopper(1)
Approx.20”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”clearvinyltubing (1)**
2”length of1/2"PVCpipe (1)**
Wedges(2)
Hose clamps(3)*
*Hoseclampscan be used asflowrestrictors.
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately8gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible withRefill #10 Device
(A different style stopper mayberequestedfor thispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPH325 - 325GPH Pump
16 FTcord length

F
T
-
302
Echo ParkFountain
Two people are recommended for the installation ofthisfountain!
Revised
June29, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof383poundswith
anapproximate1square foot footprint.
FT-302C(269lbs)
28”Wx17.5”H
FT-302B(43lbs)
24.25”Wx1.25”H
FT-302A(4lbs)
7.5”Wx3”H
1. Position thebasin (FT-302C) where thefountain is to be
installed, ensuringthatitislevel.
2. Assemblethepumpkit
a. Connectthetubingtothepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately6”fromthepump.
3. Feedthepumpcordthrough theholeandchannelinthe
basin(FT-302C).
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Center thelargedisc(FT-302B) insidethebasin, ensuring
thatitiscenteredand level.
6. Holdingthewaterfeaturedisc(FT-302A)over thelarge
disc(FT-302B),insertthePVCconnectedto thenon-kink
tubingintothePVCcoupling protrudingfromthebottom.
7. Carefullyplace waterfeature disc(FT-302A)into thelarge
disc(FT-302B) ensuringthatitiscentered.
8. Fillthefountainwithwater.