Campania International FT-199 Lucas Fountain Guide

FT
-
199 Lucas
Fountain
R
evised
April 6, 2017
PumpKitParts List
PK140 Pump (1)
#7 stopper(1)
Copper“T”Connector(1)
Approx.8”length of½”BlackNon-Kinktubing(1)
Approx.6”length of½”BlackNon-Kinktubing(1)
9”lengthsof3/8”rebar(2)
CopperSpiller(1)
2.8oztube ofsilicone (1)
Hose clamps(5)*
*Hoseclamps maybe used asflow restrictors
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately2.5gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

FT
-
199 Lucas
Fountain
R
evised
April 6, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof282 poundswithanapproximate 1.5squarefoot
footprint.
FT-199C (171lbs)
20.5”Lx10.75”Wx16”H
FT-199B (72lbs)
10”Lx5”Wx20”H
FT-199E(2lbs)
6.25”Lx1”Wx3”H
FT-199A(11lbs)
10”Lx5”Wx3.5”H
FT-199D(7lbs)
6”Lx12.5”Wx1”H
1. Place thebasin(FT-199C) intopositionwherethefountainwillbeinstalled, ensuringthat
it islevel.
2. Assemble thepumpkit
a. Place hoseclampsonbothendsofbothpiecesof1/2"non-kinktubing.
b. Securethe8”lengthtothepumpwater outlet.
c. Place thestopper aroundthepumpcord approximately6inchesfromthepump.
3. Feedthepumpcord through thehole inthebasin(FT-199C) andthechannel.
4. FIRMLY press thestopper intothehole evenly.
a. Note: Usingthehandle ofascrewdriver or hammerworksbesttopress the
stopper inplace.
5. Securethelooseendofthe8”lengthofnon-kink tubingtothebottommostcopper pipe
protruding insidethebasin(FT-199C).
6. Securethe6”lengthofnon-kink tubingtotheupper copper pipeprotruding insidethe
basin(FT-199C).
7. Place the2piecesofrebar intothePVCpipesat thebackcornersofthebasin(FT-199C).
8. Connect theother endofthe6”lengthofnon-kinktubingtothecopper pipeprotruding
fromthebottomofthewater feature(FT-199B).
9. Lower thewaterfeature(FT-199B) over therebar supportsandontothebasin(FT-199C).
10. Spreadasmallamountofsiliconeontothebottomofthecopper spiller andplace it onthe
spoutinthewater feature(FT-199B).
a. Cleanawayanyexcesssilicone.
11. Fit theplumbingcover (FT-199E) intothespace infrontofthe6”lengthofnon-kink
tubing.
12. Insertthecopper “T”intothepipeprotruding at thetop ofthewater feature(FT-199B).
a. Thisismeanttocontrolwater flow.
13. Spreadathinbeadofsiliconeat thetop ofthewaterfeature(FT-199B) andlower the
spiller stop (FT-199A) intoplace.
a. Cleanawayanyexcesssilicone.
14. Place thepumpcover plate (FT-199D)over thepumpinsidethebasin(FT-199C).
15. Let thefountainsit 24 hoursbeforefillingwithwater.