Campania International FT-244 User manual

FT
-
244CirrusGardenTerraceFountain
Revised
March8, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK120 pump (1)
#7 M-Seriesstopper(1)
Approx.6”length of1/2”BlackNon-Kinktubing (1)**
1”length of5/8”clearvinyltubing (1)**
1”length of1/2"PVCpipe (1)**
Adhesive Dots(4)
Hose clamps(1)*
*Hoseclampscan be used asflowrestrictors.
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately1gallonof water.
Afountain cover isnot available forthisfountain.
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PES120 - 120GPH Pump
5FTcord length

FT
-
244CirrusGardenTerraceFountain
Revised
March8, 2018
Assemble your fountainon alevel surface capable ofholding aminimumof50
poundswithanapproximate0.25 squarefootfootprint.
FT-243B(34lbs)
16”Wx6.75”H
FT-244A(10 lbs)
12”Wx1.25”H
1. Position thebasin(FT-243B) wherethe
fountainistobeinstalled, ensuring that it is
level.
2. Assemble thepumpkit.
a. NOTE:All pumpscomewith1
adapter alreadyinsertedintothe
pumpand 2adapterssecured tothe
power cord.
i. Thisfountain usesthe largest
adapter provided.
b. Using ahoseclamp, attachthe1/2”non-
kink tubingtothepumpoutlet.
c. Place thestopper around thepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordall thewaythrough the
hole and thechannel inthebasin(FT-243B)
toensurethefountainwill belevel.
a. Lineup thesplit inthestopper withthe
direction that thechannel under the
basingoes.
4. FIRMLY press thestopper intothehole
evenly.
5. Holding thewaterfeaturedisc(FT-244A)
over thebasin(FT-243B), insertthePVC
connectedtothenon-kink tubing intothe
PVCcoupling protruding fromthebottomof
thedisc.
6. Center thewater feature(FT-244A) intobasin
(FT-243B).
7. Fill thefountainwithwater.